Joint Learning in Innovative R&D Collaboration

The present study analyzes the mechanisms and facilitators behind joint learning in R&D collaborations by way of a qualitative comparative case study analyzing three supplier relationships and three internal R&D partnerships of the focal organization. The results suggest a single joint learning process for internal and external relationships in which the role of the customer and the facilitation of the joint learning process vary depending on the context. Whereas the role of motivation is central for joint learning in the internal relationships, mutual trust is important to the external relationships.     

Atomic layer deposition of HfO2 thin films and nanolayered HfO2–Al2O3–Nb2O5 dielectrics

Smooth, 4–6-nm thick hafnium oxide films were grown by atomic layer deposition from HfI₄ or HfCl₄ and H₂O on SiO₂/Si(1 0 0) substrates at 300 °C. Non-uniform films were obtained on hydrogen-terminated Si(1 0 0). The stoichiometry of the films corresponded to that of HfO₂. The films contained small amounts of residual chlorine and iodine. The films deposited on SiO₂/Si(1 0 0) were amorphous, but crystallized upon annealing at 1000 °C. In order to decrease the conductivity, the HfO₂ films were mixed with Al₂O₃, and to increase the capacitance, the films were mixed with Nb₂O₅. The capacitance–voltage curves of the Hf–Al–O mixture films showed hysteresis. The capacitance–voltage curves of HfO₂ films and mixtures of Hf–Al–Nb–O were hysteresis free.     

Effect of Austenite Pancaking on the Microstructure,Texture, and Bendability of an Ultrahigh-Strength Strip Steel

The effect of austenite pancaking in the non-recrystallization regime on microstructure and texture evolution and thereby on bendability was investigated in an ultrahigh-strength strip steel with a martensitic-bainitic microstructure. The results indicate that an increase in rolling reduction (R _tot) below the non-recrystallization temperature, which improves the strength and toughness properties, increases the intensities of the ~{554}〈225〉 _α and ~{112}〈110〉 _α texture components along the strip centerline and of the ~{112}〈111〉 _α component at the surface region. Even with the highest R _tot of 79 pct, the bendability along the rolling direction was good, but the preferred alignment of rod-shaped MA constituents along the rolling direction led to a dramatic decrease in the bendability transverse to the rolling direction, with severe cracking occurring even at small bending angles. The early cracking is attributed to localization of the strain in narrow shear bands. It is concluded that the R_tot value has to be limited to guarantee successful bendability.     

Robust estimation of bioaffinity assay fluorescence signals.

In this paper, the challenging problem of robust mean-signal estimation of a single-step microparticle bioaffinity assay is investigated. For this purpose, a density estimation-based robust algorithm (DER) was developed. The DER algorithm was comparatively evaluated with four other parameter estimation methods (mean value, median filtering, least square estimation, Welsch robust m-estimator). Two important questions were raised and investigated: 1) Which of the five methods can robustly estimate the mean bioaffinity signal? and 2) How many microparticles need to be measured in order to obtain an accurate estimate of the mean signal value? To answer the questions, bootstrap and coefficient of variation (CV) analyses were performed. In the CV analysis, the DER algorithm gave the best results: The CV ranged from 0.8% to 4.9% when the number of microparticles used for the mean signal estimation varied from 800 to 30. In the bootstrap analysis of the standard error, the DER algorithm had the smallest variance. As a conclusion, it can be underlined that: 1) of all methods tested, the DER algorithm gave the most consistent and reproducible results according to the bootstrap and CV analysis; 2) using the DER algorithm accurate estimates could be calculated based on 80-100 particles, corresponding to a typical assay measurement time of 1 min; and 3) the investigated bioaffinity signals contained a large number of outliers (observations that severely deviate from the majority of data) and therefore robust techniques were necessary for the mean signal estimation tasks.     

Heat transfer characteristics of horizontal steam generators under natural circulation conditions

This paper deals with the heat transfer characteristics of horizontal steam generators, particularly under natural circulation (decay heat removal) conditions on the primary side. Special emphasis is on the inherent features of horizontal steam generator behaviour. A mathematical model of the horizontal steam generator primary side is developed and qualitative results are obtained analytically. A computer code, called HSG, is developed to solve the model numerically, and its predictions are compared with experimental data. The code is employed to obtain for VVER 440 steam generators quantitative results concerning the dependence of primary-to-secondary heat transfer efficiency on the primary side flow rate, temperature and secondary level. It turns out that the depletion of the secondary inventory leads to an inherent limitation of the decay energy removal in VVER steam generators. The limitation arises as a consequence of the steam generator tube bundle geometry. As an example, it is shown that the grace period associated with pressurizer safety valve opening during a station black-out is hours instead of the 5–6 hours reported in several earlier studies. (However, the change in core heat-up timing is much less—about 1 h at most.) The heat transfer limitation explains the fact that, in the Greifswald VVER 440 station black-out accident in 1975, the steam generators never boiled dry. In addition, the stability of single-phase natural circulation is discussed and insights on the modelling of horizontal steam generators with general-purpose thermal-hydraulic system codes are also presented.     

Bulk and surface mechanical properties of clay modified HDPE used in liner applications

High‐density polyethylene (HDPE)/clay nanocomposites were prepared by melt blending process. The HDPE was mixed with different organoclays and polyethylene‐grafted‐maleic anhydride was used as a compatibiliser. A masterbatch procedure was used to obtain final organoclays concentrations of 1, 2.5 and 5 wt%. The effects of various types of nanoclays and their concentrations on morphological, thermal and mechanical properties of nanocomposites were investigated. Surface mechanical properties such as instrumented nanohardness, modulus of elasticity and creep were also measured using a nanoindentation technique. Young's, storage and loss moduli, were found to be higher than that of the neat polymer at low loading (2.5 wt%) for clay Cloisite 15A and at higher loading (5 wt%) for clay Nanomer 1.44P. The ultimate strength and the toughness decreased slightly compared to pure HDPE. The differential scanning calorimetry analysis revealed that the peak temperature of the nanocomposites increased with increased clay content while the crystallinity decreased. Also, dynamic mechanical analysis revealed the storage and loss moduli are enhanced by addition of nanoclay. Both mechanical and thermal properties of HDPE/Nanomer 1.44P nanocomposite showed interesting trends. All properties first dropped when 1 wt% of the clay was added. Thereafter, a gradual increase or decrease then followed as the loading of Nanomer was increased. These trends were observed for all mechanical properties. The results obtained from nanoindentation tests for surface mechanical properties also showed similar trend to that of bulk measurements. Based on these measurements a nanoclay additive for a liner grade HDPE was selected. © 2011 Canadian Society for Chemical Engineering     

Characterizing the evolving research on enterprise content management

Innovations in network technologies in the 1990's have provided new ways to store and organize information to be shared by people and various information systems. The term Enterprise Content Management (ECM) has been widely adopted by software product vendors and practitioners to refer to technologies used to manage the content of assets like documents, web sites, intranets, and extranets In organizational or inter-organizational contexts. Despite this practical interest ECM has received only little attention in the information systems research community. This editorial argues that ECM provides an important and complex subfield of Information Systems. It provides a framework to stimulate and guide future research, and outlines research issues specific to the field of ECM.     

Hapticity Vision

The Eyes of the Skin has become an architectural classic. Here, on the publication of a new edition, its author Juhani Pallasmaa reflects on why a sensory understanding of the world has grown in an increasingly digital age. Copyright © 2005 John Wiley & Sons, Ltd.