Sintering-driven effects on the band gap of (Pb,La)(Ti,Ni)O3 photovoltaic ceramics

In this work, the influence of the sintering temperature on the physical properties of (Pb_0.8La_0.2)(Ti_0.9Ni_0.1)O₃ (PLT-Ni) ceramics is reported. The experimental data revealed that the energy band gap of PLT-Ni ceramics could be tailored from approximately 2.7 to 2.0 eV by changing the sintering temperature from 1100°C to 1250°C. It is demonstrated that the simple substitution of Ti⁴⁺ by Ni²⁺ cations is effective to decrease the intrinsic band gap while increasing the tetragonality factor and the spontaneous polarization. However, the additional red-shift observed in the absorption edge of the PLT-Ni with increasing the sintering temperature was associated with a continuous increase in the oxygen vacancies () amount. It is believed that the impact of the creation of these thermally induced is manifold. The presence of and Ni²⁺ ions generate the Ni²⁺- defect-pairs that promoted both a decrease in the intrinsic band gap and an additional increase of the tetragonality factor, consequently, increasing the spontaneous polarization. The creation of Ni²⁺- defects also changed the local symmetry of Ni²⁺ ions from octahedral to a square pyramid, thus lifting the degeneracy of the Ni²⁺ 3d orbitals. With the increase in the sintering temperature, lower-energy absorbing intraband states were also formed due to an excess of , being responsible for an add-on shoulder in the absorption edge, extending the light absorption curve to longer wavelengths and leading to an additional absorption in “all investigated” spectrum as well.     

Sex pheromone of tomato fruit borer, Neoleucinodes elegantalis

Five candidate pheromone components were identified by analyzing pheromone gland extracts by gas chromatography (GC), coupled GC-electroantennographic detection (EAD), and coupled GC-mass spectrometry (MS): (E)-11-hexadecenol(E11–16 : OH), (Z)-11-hexadecenol (Z11–16 : OH),(E)-11-hexadecenal, (E)-11-hexadecenyl acetate, and (Z)-3,(Z)-6,(Z)-9-tricosatriene (Z3,Z6,Z9–23 : Hy). In electroantennogram (EAG) recordings, synthetic E11–16 : OH elicited stronger antennal responses at low doses than other candidate pheromone components. Field tests demonstrated that synthetic E11–16 : OH as a trap bait was effective in attracting males, whereas addition of Z11–16 : OH inhibited the males' response. Z3,Z6,Z9–23 : Hy strongly enhanced attractiveness of E11–16 : OH, but was not attractive by itself. A pheromone blend with synergistic behavioral activity of an alcohol (E11–16 : OH) and hydrocarbon (Z3,Z6,Z9–23 : Hy) component is most unusual in the Lepidoptera. The synthetic two-component pheromone is approximately 60 times more attractive than the female-produced blend and might facilitate the control of this pest.     

New sesquiterpenes fromMaytenus species (Celastraceae). Taxonomic and chemotaxonomic considerations concerning chileanMaytenus

Three new dihydro--agarofuran sesquiterpenes from two species ofMaytenus were isolated and their structures were elucidated by means of¹H and¹³C NMR studies. The differences and similarities noted in the chemical content of the dihydro--agarofuran sesquiterpenes from the fourMaytenus species from Chile are in line with the taxonomic characterization of these species; their geographical distribution is also given.     

Studies on the preparation and uses of Co-60 gamma-ray irradiated natural latex

The properties are described of low-ammonia latex concentrates produced by gamma-ray irradiation (0.5–2.0 Mrad dose) in the presence of carbon tetrachloride or chloroform as sensitizer. Dipping trials with irradiated concentrates and irradiated field latex, for the preparation of condoms and medical gloves, gave products with high ultimate elongation, low modulus, and high permanent set. A change from straight dipping and a heat treatment after drying resulted in improved physical properties. A notable feature of products prepared from these materials is their purity, i.e., low content of rubber chemicals. An economic disadvantage, at the present time, is the high initial cost of the irradiation equipment.     

Thermotropic polyester: the influence of the spacer on the physical properties

Thermotropic polyesters prepared from series of 4,4-dihydroxy-,w-diphenoxy alkanes and 4,4-dichloroformyl-,w-diphenoxy alkanes are well known. The substitution of a methylenic spacer by an oxyethylenic spacer in the main chain of these polyesters drastically modifies their physical properties, particularly the mesogenic transition temperatures, as can be observed by DSC and thermooptical analysis. The thermal stability and the polymer solubility in common organic solvents of these polymers did not show a significant change. The physical properties of the two thermotropic polyesters prepared in diphenyl ether were evaluated.     

Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermo‐mechanical properties

Novel polymer nanocomposite foams made by a two step compression molding method are analyzed in this article. Nanocomposites of low density polyethylene and an organo‐modified hectorite were first melt compounded and then foamed using a compression molding method. To study the influence of the presence and the amount of hectorite in both mechanical and thermal properties, samples with 3% and 7% content of hectorite were prepared. Polyethylene crystalline characteristics and thermal stability of the samples were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Mechanical properties of foams and solid nanocomposites were analyzed by using dynamical mechanical analysis (DMA). Thermal expansion of the samples was analyzed by thermomechanical analysis. The results indicate that the exfoliation of hectorite platelets was achieved after the foaming process, but not during the melt mixing step. Foams with hectorite nanoparticles exhibit improved thermal stability and mechanical properties when compared with neat polymeric foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

High molecular weight methyl ester of microbial poly(β,l-malic acid): Synthesis and crystallization

High molecular weight poly(α-methyl β,l-malate) (M_n ∼ 25,000, PD ∼ 1.7) was prepared from microbial poly(β,l-malic acid) (M_n ∼ 29,000, PD ∼ 1.3) by methylation with diazomethane in dry acetone without substantial cleavage of the polyester main chain. The thermal properties of this poly(malate) were assessed and its crystal structure was preliminary examined. Two crystal forms were identified by X-ray diffraction, their occurrence being dependent on crystallization conditions. The kinetics of nonisothermal and isothermal crystallizations from the melt were studied and modelled using the Avrami approach. Results were compared to those recently reported by us for low molecular weight poly(α-methyl β,l-malate) (M_n ∼ 3000, PD ∼ 1.3).     

Synthesis and properties of chitosan-modified poly(vinyl butyrate)

Modification of chitosan by grafting of vinyl butyrate was carried out in homogeneous phase using potassium persulfate as redox initator and 1.5% acetic acid as solvent. The percent grafting and grafting efficiency were analysed and the high grafting efficiency up to 94% was observed. The effects of reaction variables such as monomer concentration, initiator concentration, temperature and reaction time were investigated. It was observed that the solubility of chitosan was markedly reduced after grafting with vinyl butyrate. The grafted product is insoluble in common organic solvents as well in dilute organic and inorganic acids. Characterization of the graft copolymers were carried out by using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) technics. Characteristic signal of carbonyl group was observed at 1,731 cm⁻¹ which belongs to the poly vinyl butyrate segments in the graft copolymer. The melting transition of the chitosan main chain in the copolymer shifted to 124°C from its original value 101°C. In addition to these, we have also studied topology of the graft copolymer and the SEM micrograph showed continuous homogenous matrix which means there is no phase separation.     

Aromatization of n-hexane on Mo2C catalysts

The deposition-precipitation method was used to prepare gold catalysts based on different supports. Their catalytic activities for combustion of carbon monoxide (CO) and formaldehyde (HCHO) were investigated. All these catalysts showed good activity for the two reactions and the Au/CeO₂-a catalyst exhibited the highest activity for the two reactions. Furthermore, catalysts derived from the as-precipitate hydroxides exhibited higher activity than that from corresponding oxide supports. The BET, XRD, TEM and XPS were carried out. The results indicated that the gold dispersed more homogeneous on the as-precipitate hydroxide supports than that on the corresponding oxide supports.     

Polymerization Catalysis in Liquid Propylene: High Activities and Molecular Weights in Propylene/CO Copolymerization Reactions

Summary: The dicationic [(dppp)Pd(NCCH₃)₂](BF₄)₂ catalyst (dppp = 1,3‐bis(diphenylphosphino)propane) was applied in a liquid monomer, two phase process for the CO/propene copolymerization reaction. For the first time it was possible to synthesize propene/CO copolymers with an activity up to 7 500 g/(mol · h) and molecular weights of 500 000 g/mol. Activities up to 40 000 g/(mol · h) could be obtained with the use of the unsymmetric catalyst [(CF₃‐dppp)Pd(NCCH₃)](BF₄)₂ (CF₃‐dppp = 1‐diphenylphosphino‐3‐bis[3,5‐di(trifluormethyl)phenyl]phosphinopropane) in homogeneous liquid propene solution.

Granules found after copolymerization.