Mixture design applied for the development of films based on starch,polyvinyl alcohol,and glycerol

Starch and polyvinyl alcohol (PVA) are biodegradable materials with potentiality to replace the conventional polymers in some applications. The aim of this work was to produce biodegradable films of PVA, cassava starch, and glycerol by thermoplastic extrusion using a mixture design to evaluate the effects of each component in the blend properties. Six formulations were prepared using a twin‐screw extruder coupled with a calender. All the materials were visually homogeneous and presented good processability. Mechanical properties were dependent on both the relative humidity conditioning and the formulation; higher relative humidities detracted the mechanical properties, which was associated to plasticizer effect of the water. Furthermore, the mechanical properties were better when higher concentrations of PVA were used, resulting in films with lower opacity, lower water vapor permeability, and higher thermal stability, according to TGA. Biodegradable materials based on starch, PVA, and glycerol have adequate mechanical and processing properties for commercial production. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42697.     

Ammonium complex of niobium as a precursor for the preparation of Nb2O5/Al2O3 catalysts

Ammonium oxalate complex of niobium was investigated as an aqueous precursor for the preparation of x% Nb₂O₅/Al₂O₃ (x=5, 10, 20 and 30 wt.%) samples. Catalysts with the same Nb₂O₅ contents were also prepared from the traditional niobium oxalate/oxalic acid aqueous solution. The catalysts were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), temperature-programmed reduction (TPR), infrared spectroscopy of chemisorbed pyridine and X-ray photoelectron spectroscopy (XPS). A comparison with the preparation method using the niobium oxalate salt was performed. The results showed that the niobium precursor influence the species growing leading to phases with different reducibility. The XPS revealed the presence of multilayers of niobium oxide on the Nb₂O₅/Al₂O₃ samples prepared by using niobium ammonium oxalate complex, while the ones obtained from niobium oxalate led to Nb₂O₅ particles islands. The addition of niobium oxide decreased the fraction of Lewis acid sites and increased the fraction of Brønsted acid sites, independent of the precursor salt. However, the creation of BAS was more pronounced on the Nb₂O₅/Al₂O₃ samples prepared from niobium oxalate.     

Effects of porosity,dry unit weight,cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures

One of the conventional ways to improve the mechanical behavior of soils is to mix them with cementing agents such as cement, lime and fly ash. Recently, introduction to alternative materials or sub-products that can be adopted to improve the soil strength is of paramount importance. Therefore, the present study aims to investigate the effects of porosity (η), dry unit weight (γ_d) of molding, cement content (C) and porosity/volumetric cement content ratio (η/C_iv) or void/cement ratio on the unconfined compressive strength (q_u or UCS) of silty soil–roof tile waste (RT) mixtures. Soil samples are molded into four different dry unit weights (i.e. 13 kN/m³, 13.67 kN/m³, 14.33 kN/m³ and 15 kN/m³) using 3%, 6% and 9% cement and 5%, 15% and 30% RT. The results show that with the addition of cement, the strength of the RT–soil mixtures increases in a linear manner. On the other hand, the addition of RT decreases q_u of the samples at a constant percentage of cement, and the decrease in porosity can increase q_u. A dosage equation is derived from the experimental data using the porosity/volumetric cement content ratio (η/C_iv) where the control variables are the moisture content, crushed tile content, cement content and porosity.     

Evaluation of the effects of operational parameters in the pretreatment of sugarcane bagasse with diluted sulfuric acid using analysis of variance

The pretreatment of lignocellulosic residues has been extensively studied as a method to disrupt the cellulose–hemicelluloses–lignin complex in biomass to access the sugars in their respective components. In this work, we carried out a study using sulfuric acid pretreatment of sugarcane bagasse by varying the following operational parameters: solid loading (10–30% of bagasse relative to the volume of the sulfuric acid solution), sulfuric acid concentration (0.5–2.5% relative to the dry mass of bagasse), reaction time (5–25?min), and temperature (135–195°C). The obtained solids from each pretreatment condition were submitted to enzymatic hydrolysis under the same process conditions: 0.232?g of Celluclast 1.5?L and 0.052?g of Novozym 188 per g of pretreated sugarcane bagasse, 72?h of hydrolysis, and 200?rpm of agitation at 50°C. Using central composite rotational design configuration in the experiments and analysis of variance, the results indicate that the conditions that produced larger quantities of glucose by enzymatic hydrolysis (0.35?g glucose/g pulp) with minimum amounts of degradation products were as follows: 20% solids loading, 15?min of reaction time, 1.5% sulfuric acid, and a minimum temperature of reaction of 170°C.     

A random key based genetic algorithm for the resource constrained project scheduling problem

This paper presents a genetic algorithm for the Resource Constrained Project Scheduling Problem (RCPSP). The chromosome representation of the problem is based on random keys. The schedule is constructed using a heuristic priority rule in which the priorities of the activities are defined by the genetic algorithm. The heuristic generates parameterized active schedules. The approach was tested on a set of standard problems taken from the literature and compared with other approaches. The computational results validate the effectiveness of the proposed algorithm.     

Methanol crossover reduction by Nafion modification with palladium composite nanoparticles: Application to direct methanol fuel cells

Modified Nafion membranes by self-assembling of palladium composite nanoparticles were successfully synthesized and used for the reduction of methanol crossover in Direct Methanol Fuel Cells (DMFC). The positively charged polydiallyldimethylammonium (PDDA) was used for stabilizing the palladium nanoparticles. Modified and unmodified membranes were tested in a DMFC at 30 °C and 50 °C. The performance of the DMFC using modified membranes with different composite nanoparticles (i.e., Pd/PDAA ratios) and self-assembling times was compared with that using an unmodified membrane. The modified Nafion membranes proved to reduce the methanol crossover in ca. 10% – 35%, depending on the self-assembling time, nanoparticles composition and test temperature. However, a decrease in the performance was observed mainly for the modified membrane with the higher PDDA content due to a decrease in the proton conductivity. On the other hand, the membrane modified with nanoparticles containing less PDDA and tested at 50 °C showed similar performance as the unmodified one. Additionally, the fuel cell efficiencies obtained for all the modified membranes at both temperatures were similar or higher than the unmodified one.     

Laboratory and Field-scale Evaluation of Low-pH Fe(II) Oxidation at Hughes Borehole, Portage, Pennsylvania

The Hughes Borehole is located in the bituminous coal region of south-central Pennsylvania and drains an underground mine complex of ca. 2,950 ha. The borehole discharge averages approximately 63 L/s of acidic (pH 4, 230 mg/L acidity) mine drainage that contains elevated concentrations of Fe(II) (100 mg/L). Long-term monitoring of the site showed that biological Fe(II) oxidation occurred without human intervention and, over previous decades, has produced a 0.6 ha iron mound up to 2 m deep. On-mound channel reactors along with laboratory-scale gutter reactors were constructed to determine conditions that can exploit biological Fe(II) oxidation for passive treatment. Dissolved Fe(II) was much more efficiently oxidized from gutter reactors that contained iron mound sediment than ones without any sediment. Close to 100% of the dissolved influent Fe(II) was oxidized in 5–10 h and 75% of the total dissolved Fe was removed. In addition, the reactors performed better as the sediment aged, so that shorter residence times of 1–2 h were also capable of oxidizing substantial amounts of the influent Fe(II). The addition of surface area to the on-mound reactors improved Fe(II) oxidation at residence times of 30 min or less. The results of this study can be used to help design and build treatment systems for low-pH acid mine drainage (AMD) discharges.     

A study on the colloidal nature of urea‐formaldehyde resins and its relation with adhesive performance

Urea‐formaldehyde (UF) resins present a swollen colloidal phase dispersed within a continuous water phase containing soluble oligomers. The main goal of the present investigation is to clarify the physical and chemical nature of those two phases and elucidate their impact on the bonding process. Optical and electronic microscopy has provided information on the morphology of the colloidal phase, showing primary particles and particle agglomerates. Mechanisms are suggested for the colloidal stabilization and dilution‐induced flocculation. Three commercial UF resins with different F/U molar ratios were studied using particle size distribution (PSD) analysis. The results showed the influence of the resin's degree of condensation and the aging status on the size of the colloidal structures. Gel permeation chromatography analysis was performed on samples of different resins and of the respective continuous and dispersed phases, separated by centrifugation. The quantified fraction of insoluble molecular aggregates present in the chromatograms was related to the resins synthesis conditions and age. Differential scanning calorimetry and tensile shear strength tests were performed to evaluate the reactivity and adhesive performance of each phase. It is suggested that the colloidal phase acts as a reactive filler at the wood joint interfaces, contributing for the resins bonding performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Quail egg yolk (Coturnix coturnix japonica) enriched with omega-3 fatty acids

This experiment was carried out with 58-week old laying quails (Coturnix coturnix japonica) assigned to four treatment groups with eight quails per replication in six repetitions in a completely randomized design. The treatments consisted of diets with different levels of flaxseed (0, 1.5, 3.0, and 5.0%). The amounts of cholesterol and total lipids and the fatty acid composition of quail egg yolk were determined in four 21-day cycles. No difference was found in cholesterol levels between the four treatments and the four cycles. The increased ingestion of linolenic acid (LNA) in diet reduced the formation of arachidonic acid (AA) significantly. The 3.0 and 5.0% treatment groups presented a reduction in total saturated fatty acids (TSFA) with the increase in percent flaxseed in feed comparatively to the control value. The n-3 fatty acid level was high in all treatments when compared to that of the control group. The n-6/n-3 ratio decreased from 21.30 (control) to 4.52 (5.0%), which is a better value from the nutritional viewpoint.