悬架双筒液压充气减振器的基本结构和工作原理

该文对双筒液压充气减振器的基本结构和工作原理进行了分析，指出双筒液压充气减振器由于提高了减振器的临界速度，从而增强了外特性的抗畸变能力。提供了国产夏利（ＴＪ７１００）微轿车前减振器充气前后的试验外特性。     

网格生成方法在APFSDS及弹托干扰流场计算中的应用

介绍APFSDS及弹托干扰流场数值模拟中的网格生成方法及其应用。利用等比数列网格生成技术，三维弧长生成技术以及拼接技术生成计算网格。该方法具有简明、快捷的特点。在临近物面的地方具有较好的贴体性和正交性。在计算脱壳穿甲弹和弹托之间的干扰时，将弹托简化为带圆弧的楔形块，计算结果比较令人满意。     

连续流动分析仪应用于水中硫化物的测定

对连续流动法测定硫化物进行初步探讨和研究。同时与其他几种测定硫化物的方法进行了比较。实验结果表明，连续流动法对硫化物分析在线性、稳定性、最低检测限、准确性和精密度等方面均优于其他方法。     

雾化液在空气-雾化钻井中的作用

在干空气钻井过程中出现地层产出液处理困难和井下不正常等现象时,常需将干空气钻井转交成空气-雾化钻井。雾化液是由表面活性剂、高分子量聚合物、井壁稳定剂等处理剂组成的。雾化液功能包括充分乳化地层产出液,促使并保持环空呈雾化稳态流,分离油永滴和钻屑团,增强空气流携屑、携水能力;抑制页岩水化并在井壁形成液膜,减小空气冲蚀作用,减小井壁摩阻。雾化液中表面活性剂的性能和浓度,及其它处理剂的水化溶解程度都会影响空气-雾化液性能。地层出液量监测对保障空气-雾化钻井顺利进行起着十分重要的指导作用。     

水土保持工程施工阶段的设计变更

通过对水土保持工程施工阶段设计变更原因的分析，指出水土保持生态工程施工阶段变更的必要性和建设、监理单位对变更管理的重要性。通过对变更设计的程序和原则进行的分析，阐述了变更设计涉及的几个主要问题。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Rapid synthesis of La0.7Sr0.3MnO3+λ catalysts by microwave irradiation process

Microwave irradiation processing (MIP) was considered as a potential method to synthesize perovskite-type oxides rapidly, cleanly and energy-efficiently. In this paper, La_0.7Sr_0.3MnO_3+λ, a kind of promising catalyst for automobile exhaust purification, was successfully prepared by MIP in not more than 5 min. The sol–gel method was also used for comparison. All the samples were evaluated by catalytic activity tests in the simulated exhaust and characterized by XRD, BET, TEM and XRF analyses. The results showed that the integrated perovskite-type phase and uniform particle size were obtained in the microwave-treated samples. And those ones exhibited a better oxidation activity under slightly oxygen-rich condition than that by sol–gel method, which may be related to more A-site cation vacancies and larger bulk oxygen content generated in MIP. Possible formation mechanism of perovskites in MIP was also discussed.     

Analysing the Diversity of Water Pricing Structures: The Case of France

This paper presents the results of a 2003 national survey of urban water pricing structure implemented by 429 district level water utilities. After providing some background elements on the diversity of existing water pricing structures, the paper shows how each structure can be used to achieve different management objectives (water allocation efficiency, costs recovery, and equity). It then describes the structures adopted by French water utilities, showing that flat rate are rarely adopted; declining blocks frequently used; and increasing blocks pricing which should be used to promote water use efficiency remain extremely rare. A statistical clustering is then conducted and a typology of situations elaborated. The paper concludes with highlighting that current pricing structures are influenced by past practices and that the dominant objective of water utilities is to cover costs.     

Asymptotic reduced-dimensional steering strategies for CMG singularity-free control

The geometric singularity problem is one of principal difficulty when using single-gimbal control moment gyros as spacecraft attitude control devices. To overcome singularity, new steering logics are suggested in this paper which results in a reduction in the difficulty of generating gimbal rates around a singular state. One of the suggested steering laws presented is the reduced dimensional singular value decomposition steering law, which adopts the singular value decomposition in reduced dimensional forms. Two other steering laws make use of the least square method in reduced dimensional forms. All of the suggested steering laws have been generated for the compensation of the torque insufficiency. These logics are verified mathematically and simulations at a singular condition and non-singular condition are performed to see how well they work.