Relationship of Carcass Weight to Muscle Fiber Characteristics and Pork Quality of Crossbred (Korean Native Black Pig × Landrace) F2 Pigs

A total of 168 carcasses of crossbred (Korean native black pig × Landrace) F₂ pigs were divided into four carcass weight groups (A, 70–79 kg; B, 80–89 kg; C, 90–99 kg; D, 100–109 kg). The influence of carcass weight on muscle fiber characteristics and meat quality traits of pork, from the longissimus dorsi, were investigated. Carcass traits such as loin-eye area and back-fat thickness were found to increase with increasing carcass weight. Fat content, sarcomere length, drip loss, and meat color values (L*, a*, and b*) also increased with increasing carcass weight. However, moisture content and Warner–Bratzler shear force decreased with increasing carcass weight. A decrease in the compositions of type I and IIA fibers and an increase in the composition of type IIB fibers were observed with increasing carcass weight. The heavier carcasses showed type I and IIB fibers of bigger size and a smaller size of type IIA fibers. Fiber number percentage and the diameter of type IIB showed a significant positive correlation with carcass weight, fat content, and lightness (p?<?0.05). Fiber diameter of type IIB was positively correlated with loin-eye area, but was negatively correlated with moisture content. However, muscle fiber characteristics had no correlation with back-fat thickness, ultimate pH, Warner–Bratzler shear force, and b* value. In conclusion, crossbred pig which has of high composition and size of type IIB has high lightness (L* value) and water-holding capacity (drip loss). Therefore, excessively high weight of carcass has influence on pale and exudative properties in pig because of muscle fiber characteristics, especially type IIB fiber.     

Magnetite dissolution and corrosion behavior in high temperature EDTA solvents

The effect of temperature on magnetite dissolution and corrosion behavior was evaluated in ethylenediaminetetraacetic acid (EDTA)-based solvents for iron oxide chemical cleaning of nuclear steam generators at temperatures ranging from 93 to 150 °C. Magnetite dissolution was drastically accelerated as the temperature was raised to 150 °C, while the amount of corrosion was controlled well within an allowable limit. Periodic venting and excessive EDTA concentration in the solvents were expected to be very effective in dissolving hard tube sheet sludge piles. The linear polarization (LP) method was also suitable to monitor the changes of corrosion rates and process conditions such as venting.     

Laparoscopically assisted vaginal hysterectomy

OBJECTIVE: To report our experience with laparoscopically assisted vaginal hysterectomy (LAVH) and evaluate the advantages of LAVH. STUDY DESIGN: From January 1991 to August 1992, 176 LAVHs were performed at the Department of Obstetrics and Gynecology, College of Medicine, Chung-Ang University, Seoul, Korea. The indications for LAVH, based on the preoperative diagnosis, were uterine myomas, dysmenorrhea, chronic pelvic inflammatory disease or pelvic pain, dysfunctional uterine bleeding and cervical intraepithelial neoplasia (in order of frequency). RESULTS: Patients had concomitant procedures, including incidental appendectomy, posterior wall repair, pelvic adhesiolysis and salpingo-oophorectomy. Bipolar forceps were used to compress and desiccate vessels. The Nd-YAG laser, scissors and/or unipolar electrode were used for tissue division, excision of adhesions and cutting. The intraoperative complications were bladder perforation, massive hemorrhage and inferior epigastric vessel injury (one case each). The postoperative complications were infection, voiding difficulty, febrile morbidity, pelvic abscess, incisional hernia, vaginal vault bleeding and peroneal nerve palsy (one case each). CONCLUSION: Hysterectomy can be safely performed vaginally assisted by operative laparoscopy by well-trained laparoscopists, resulting in reduced surgical morbidity, blood loss, postoperative discomfort, recovery time and hospitalization.     

Characteristic Analysis of Interior Permanent-Magnet Synchronous Motor in Electrohydraulic Power Steering Systems

This paper presents design and analysis results of a 2.6-kW interior permanent-magnet synchronous motor developed for an electrohydraulic power steering system. The motor was designed by using the proposed equivalent magnetic circuit model in consideration with a core loss. To analyze motor characteristics by using the equivalent magnetic circuit model, inductance and iron-loss resistance, which are affected critically by magnetic saturation, are obtained by using finite-element analysis. Finally, motor characteristics such as armature current, torque, and efficiency are calculated by the equivalent magnetic circuit model and verified by experimental results.     

Initial results on computational performance of Intel many integrated core,sandy bridge,and graphical processing unit architectures: implementation of a 1D c++/OpenMP electrostatic particle‐in‐cell code

We present initial comparison performance results for Intel many integrated core (MIC), Sandy Bridge (SB), and graphical processing unit (GPU). A 1D explicit electrostatic particle‐in‐cell code is used to simulate a two‐stream instability in plasma. We compare the computation times for various number of cores/threads and compiler options. The parallelization is implemented via OpenMP with a maximum thread number of 128. Parallelization and vectorization on the GPU is achieved with modifying the code syntax for compatibility with CUDA. We assess the speedup due to various auto‐vectorization and optimization level compiler options. Our results show that the MIC is several times slower than SB for a single thread, and it becomes faster than SB when the number of cores increases with vectorization switched on. The compute times for the GPU are consistently about six to seven times faster than the ones for MIC. Compared with SB, the GPU is about two times faster for a single thread and about an order of magnitude faster for 128 threads. The net speedup, however, for MIC and GPU are almost the same. An initial attempt to offload parts of the code to the MIC coprocessor shows that there is an optimal number of threads where the speedup reaches a maximum. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication of two-dimensional zinc oxide nanorod patterns and their application for optical diffraction grating effect

We present a novel method for fabricating two-dimensional arrays of zinc oxide (ZnO) nanorod patterns. Vertically aligned ZnO nanostructure patterns were synthesized by hydrothermal growth on a two-dimensional seed layer pattern formed by atomic layer deposition. Various characteristics of ZnO seed films were experimentally studied in order to optimize the fabrication of ZnO rod structures in terms of their uniformity and vertical alignment on the two-dimensional-patterned surfaces. Using these ZnO structures as hierarchical electrodes, we demonstrate that localized electric fields in the proximity of ZnO rod patterns can be used for periodic alignment of liquid crystal molecules, resulting in the optical diffraction grating effect. Process conditions for creating ZnO rod patterns that best enhance diffraction efficiency are further discussed. The current study is the first demonstration of hierarchical ZnO rod patterns as electrodes for optical modulation of a medium. We believe this will be beneficial for future optical applications.     

Fine-grained data access control for distributed sensor networks

Distributed sensor networks are becoming a robust solution that allows users to directly access data generated by individual sensors. In many practical scenarios, fine-grained access control is a pivotal security requirement to enhance usability and protect sensitive sensor information from unauthorized access. Recently, there have been proposed many schemes to adapt public key cryptosystems into sensor systems consisting of high-end sensor nodes in order to enforce security policy efficiently. However, the drawback of these approaches is that the complexity of computation increases linear to the expressiveness of the access policy. Key-policy attribute-based encryption is a promising cryptographic solution to enforce fine-grained access policies on the sensor data. However, the problem of applying it to distributed sensor networks introduces several challenges with regard to the attribute and user revocation. In this paper, we propose an access control scheme using KP-ABE with efficient attribute and user revocation capability for distributed sensor networks that are composed of high-end sensor devices. They can be achieved by the proxy encryption mechanism which takes advantage of attribute-based encryption and selective group key distribution. The analysis results indicate that the proposed scheme achieves efficient user access control while requiring the same computation overhead at each sensor as the previous schemes.     

Characterization of spectral responses of humic substances upon UV irradiation using two-dimensional correlation spectroscopy

The spectral responses of a leaf litter derived humic substance (LLHS) and Suwannee River fulvic acid (SRFA) upon ultraviolet (UV) A irradiation were characterized using two-dimensional correlation spectroscopy (2D-COS) based on the absorption and the synchronous fluorescence spectra at different irradiation times. A 12 day irradiation on the humic substances (HS) resulted in higher reduction of the absorbance relative to the dissolved organic carbon concentration, suggesting that aromatic chromophores were preferentially oxidized and/or non UV-absorbing compounds were generated by the photobleaching. Synchronous fluorescence spectra revealed the preferential removal of fulvic-like and humic-like fluorophores and delayed response of protein-like fluorescence upon the irradiation. The spectral features at long wavelengths (>430 nm) appear to be affected by intra-molecular interactions of the individual chromophores associated with shorter wavelengths. Absorption-based 2D-COS demonstrated that there are three types of absorption bands for the two HS, which changed sequentially in the order of 290-400 nm → 200-250 nm → 250-290 nm. In addition, two or three distinctive fluorescence bands in response to the irradiation were identified from 2D-COS. The sequential orders and the associated wavelength bands were possibly explained by the irradiation wavelengths and the differences between direct and indirect photochemical reactions. The interpretation of the 2D-COS results was very consistent with the kinetic rate constants individually calculated at several discrete wavelengths. Our study demonstrated that 2D-COS could be used as a powerful tool in identifying distinctive bands of HS that have dissimilar behavior and the associated sequential orders by visualizing the spectral changes at continuous wavelengths.     

Three‐Dimensional Branched Nanowire Heterostructures as Efficient Light‐Extraction Layer in Light‐Emitting Diodes

A facile method to fabricate three‐dimensional branched ZnO/MgO nanowire heterostructures and their application as the efficient light‐extraction layer in light‐emitting diodes are reported. The branched MgO nanowires are produced on the hydrothermally‐grown ZnO nanowires with a small tapering angle towards the tip (≈6°), by the oblique angle flux incidence of MgO. The structural evolution during the growth verifies the formation of the MgO nanoscale islands with strong (111) preferred orientation on very thin (5–7 nm) MgO (110) layer. The MgO nanobranches, then grown on the islands, are polycrystalline consisting of many grains oriented in specific directions of <200> and <220>, supported by the nucleation theory. The LEDs with the branched ZnO/MgO nanowire arrays show a remarkable enhancement in the light output power by 21% compared with that of LEDs with pristine ZnO nanowires. Theoretical calculations using a finite‐difference time‐domain method reveal that the nanostructure is very effective in breaking the wave‐guiding mode inside the ZnO nanowires, extracting more light especially in radial direction through the MgO nanobranches.     

Antimicrobial performance of alkaline ionic fluid (GC-100X) and its ability to remove Escherichia coli O157:H7 from the surface of tomatoes

An efficacy test of GC-100X, a noncorrosive alkaline ionic fluid (pH 12) composed of free radicals and supplemented with xylitol, was carried out against six major foodborne pathogens-Staphylococcus aureus FRI 913, Salmonella enterica serovar Enteritidis ATCC 13076, S. enterica serovar Typhimurium DT104 Korean isolate, Vibrio parahaemolyticus ATCC 17803, Escherichia coli O157:H7 ATCC 43894, and Pseudomonas aeruginosa KCTC 1637-at three different temperatures (4, 25, and 36 degrees C) with or without organic load (2% yeast extract). Results revealed a more than 4-log10 (CFU/ml) reduction (1.0 x 10(4) CFU/ml reduction) against all pathogens reacted at 37 degrees C for 3 h in the absence of organic material. GC-100X solution diluted with an equal volume of distilled or standard hard water (300 ppm CaCO3) showed effective bactericidal activity, particularly against gram-negative bacteria. Washing efficacy of GC-100X solution was compared against E. coli O157:H7 on cherry tomato surfaces with those of a commercially used detergent and chlorine water (100 ppm). Viable cell counts of E. coli O157:H7 that had penetrated to the cores of tomatoes after sanitizing treatment revealed that GC-100X stock and its 5% diluted solutions had similar washing effects to 100-ppm chlorine water and were more effective than the other kitchen detergent. These results indicate that GC-100X has good bactericidal and sanitizing activities and is useful as a new sanitizer for food safety and kitchen hygiene.