WZ型系列真空铝钎焊炉的研制

简要介绍了WZ型系列真空铝钎焊炉型号，规格等技术参数，并以WZLQH－30型真空铝钎焊炉为例介绍了真空铝钎焊炉的结构及其特点，总结了真空铝钎焊炉设计研究及调试过程中的一些经验体会。     

液压夹轨装置夹不紧原因分析及夹轨装置的改造

本文通过对液压夹轨装置结构和机理分析，指出原设计夹轨装置预留压紧量(Smax-S)不足是导致夹轨装置锁不紧的主要原因，并对相应间隙和零件进行了调整和改造，解决了拖车的锁紧问题。     

装备维修技术的发展及表面工程技术的应用

在研究未来维修技术发展特点及趋势的基础上，提出装备维修技术的发展方向和重点是装备状态监测、故障诊断与预测技术，装备修复关键技术，装备维修保障综合化信息化关键技术，装备延寿与再制造技术，装备维修技术创新性研究以及装备现场抢修技术。指出纳米颗粒复合电刷镀技术、高速电弧喷涂技术、纳米固体润滑干膜技术、纳米减摩与原位动态自修复技术等先进而实用的表面工程新技术、新材料、新设备、新工艺，对实现装备维修的快速化、自动化、智能化、信息化将发挥重要作用。     

CoCrPtNb／CrTi／C多层膜记录介质的制备和性能研究

采用CoCrPtNb四元合金作磁记录介质，并采用多层膜结构（CoCrPt）100-Nbx/CrTi／C／Glass制备玻璃盘基硬盘。实验结果表明：采用适宜厚度的籽晶层与合适组分的底层和磁性层的多层膜结构，即使在室温下溅射，此种薄膜磁记录介质也可得到高达260kA／m的矫顽力；在550℃高温下，经过30min真空退火后，其矫顽力有较大幅度提高，并在Nb含量为2．4％（原子分数）时达到极大值386kA／m，适用于高密度磁记录。同时，也详细分析了磁性层和底层组分、籽晶层厚度以及真空退火对磁记录介质磁性能和微结构的影响。     

季胺萃取锌的动力学研究

以恒界面池法研究了氯化物介质中季胺萃锌的动力学。考查了搅拌转速、传质界面积和温度对萃取速率的影响，判定季爱萃锌为界面化学反应的动力学模式。进一步研究了季胺萃取剂浓度和水相Ｚｎ＾２＋浓度对萃取速率的影响，得到了与理论推断相吻合的速率方程。     

撞击流—旋转填料床反应器的微观混合性能研究

采用化学偶合法 ,对撞击流—旋转填料床反应器内微观混合进行了实验研究 ,得到了转速、喷嘴间距、射流速度及浓度等因素对离集指数Xs的影响规律 ,并对其进行了定性的分析。结果表明撞击流—旋转填料床反应器中微观混合能被极大地强化 ,可成为适合快速反应新型反应设备     

Biodegradable extruded starch blends

We prepared biodegradable extruded starch blends by first mixing starch with additives and then processing the mixture in an extruder. The mechanical properties, including tensile strength and elongation at break, solubility, biodegradability, rheological properties, molecular weight, and glass‐transition temperature of the extruded blends were studied. Glycerol and urea, to some extent, could both decrease the tensile strength and increase the percentage elongation at break because the former acts as a plasticizer and the latter can break down interactions among starch macromolecules. The extruded starch blends showed thermoplasticity, and their melts behaved as pseudoplastic liquids at a comparatively low shear rate. The biodegradability of the extruded starch was slightly higher than that of native starch. The molecular weight of starch displayed a decreasing tendency after extruding modification. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 627–635, 2003     

Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006     

Efficient and color pure blue light emitting random copolymer with fluorene and fluorenylstilbene

A blue electroluminescent polymer, random copolymer of fluorenylstilbene and fluorene, was prepared by the nickel catalyzed coupling reaction. The structure and properties of the copolymer were analyzed by various spectroscopic methods. The obtained polymer had good solubility and thermal stability with high T_g. The polymer in thin film emits strong blue luminance (max=468 nm) with narrow bandwidth upon photoexcitation. PL spectrum of the polymer in the film is almost consistent with that of solution one as well as the EL spectrum, indicating that the aggregation and the excimer fluorescence are suppressed by the introduction of fluorenylstilbene comonomer. Moreover, the introduction of fluorenylstilbene comonomer lowered the oxidation potential to lead feasible hole injection, when the compared with poly(fluorene) homopolymer. The ITO/PEDOT/polymer/LiF/Al device showed the maximum brightness of 3500 cd/m² with a turn on voltage of 4.4, the maximum efficiency of 0.878 lm/W and blue emission with CIE chromaticity coordinates of ((x,y)=(0.17, 0.25)).