Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Photocatalytic microreactor study using TiO2-coated porous ceramics

Two kinds of porous ceramic disks, having through-holes with diameters of 0.1 and 0.05 mm, were coated with TiO₂ using two different starting solutions: titanyl(IV)acetylacetonate and a commercial titania sol (STS-01). The morphology of these porous ceramics before and after TiO₂ coating was observed by SEM. The TiO₂-coated porous ceramics were examined as honeycomb photocatalytic microreactors. The photocatalytic activity was evaluated using the decomposition of methylene blue solution for radiation angles of 0° and 10° with respect to the pore axis. The highest photocatalytic activity was obtained for the porous ceramic having the pore diameter of 0.1 mm, coated with titanyl(IV)acetylacetonate and irradiated with a light angle of 0° with respect to the pore axis.     

Electrical resistivity of Si3N4 ceramics with Yb2O3 additive

Si₃N₄ ceramics with excellent mechanical properties are used for heat dissipation substrates and so on. In order to improve their reliability and expand their application fields, it is desirable to understand and control the electrical properties of Si₃N₄ ceramics. In this study, the electrical resistivity of Si₃N₄ ceramics with Yb₂O₃ additive was investigated by applying various voltages at temperatures ranging from 25°C to 300°C. When Yb₂O₃ was added as a sintering aid to Si₃N₄ ceramics, a crystalline J-phase (Yb₄Si₂O₇N₂) was formed and their electrical resistivity was significantly lower than that of Y₂O₃ additive. The electrical resistivity of the Yb₂O₃-added ceramics decreased with an increase in temperature and applied voltage. Yb existed in multiple valence states, Yb²⁺ and Yb³⁺, in the Si₃N₄ ceramics and the decrease in the electrical resistivity can be attributed hopping conduction through the J-phase. The J-phase in the Si₃N₄ ceramics was observed to be continuous, and percolation analysis suggested that the J-phase formed an infinite cluster. Therefore, the decrease in the electrical resistivity of the Yb₂O₃-added Si₃N₄ ceramics was found mainly to result from the formation of an infinite cluster of J-phase, which exhibits hopping conduction.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

Energy state of InGaAs quantum dots on SiO2-patterned vicinal substrate

The optical properties of In_0.8Ga_0.2As self-assembled quantum dots (SAQDs) grown on GaAs wire structures formed by utilizing SiO₂-patterned exact and 5°-off (001) GaAs substrates have been studied with micro-photoluminescence (μ-PL). Single PL peak was occurred for In_0.8Ga_0.2As SAQDs grown on SiO₂-patterned exact (001) GaAs, whereas double PL peaks were showed for SAQDs grown on 5°-off (001) GaAs substrates as the width of the opening windows increased. The power-dependent μ-PL spectra show that the first and second peaks of these double peaks were originated from the well-defined ground and excited state, respectively. These results demonstrated that In_0.8Ga_0.2As SAQDs selectively grown by utilizing SiO₂-patterned 5°-off (001) GaAs substrates have well-defined zero-dimensional quantum states.