Floating-island TFT leakage caused by process step reduction

The leakage mechanism for a top-gate thin-film transistor (TFT) produced using the fewest process steps in the industry is analyzed in order to achieve a high-contrast liquid crystal display (LCD). Using a T-shaped TFT structure, the OFF and ON channel lengths are defined independently, so that the leakage can be reduced with no ON current decrease     

金属结合剂#600金刚石砂轮的接触放电修锐实验研究

针对微细金刚石磨粒很难从金属结合剂砂轮的胎体中出刃的问题，开发出一种新修锐方法一接触放电修锐、它采用一种旋转复合电极修整轮与砂轮接触磨削，在金属结合剂胎体与电极间产生微小的脉冲放电，逐渐去除砂轮的金属结合剂，使微细金刚石在砂轮工作表面出刃，达到精密修锐的目的。通过对金属结合剂#600金刚石砂轮进行修锐实验，研究其有效性、修锐条件和实际应用。实验表明，该修锐方法不仅不损伤微细金刚石磨粒出刃刃角，而且还可以消除磨粒周围的结合剂尾状物，产生较好的容屑空间。磨削光学玻璃(BK10)的试验结果显示它比机械修锐能够更好地提高磨削表面质量，Ra达到0．12μm。     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Pressureless all-solid-state sodium-ion battery consisting of sodium iron pyrophosphate glass-ceramic cathode and β″-alumina solid electrolyte composite

In recent years, the expansion of demand for lithium ion batteries has resulted in soaring prices of the constituent resources. From the viewpoint of safety, studies on all-solid-state batteries are actively being carried out. In this study, we succeeded in driving all-solid-state batteries derived from nontoxic oxide glasses at room temperature without requiring scarce resources such as lithium and cobalt. The main structure of the ceramic batteries with a simple structure in which Na₂FeP₂O₇ crystallized glass and β″-alumina solid solution are joined by pressureless cofiring at 550°C. During the crystallization of Na₂O-Fe₂O₃-P₂O₅ glass, fusion with the β″-alumina solid solution is achieved. Reversible charge and discharge of 80 mAh/g were achieved at room temperature. It is not necessary to apply pressure during cell preparation or the use of the batteries. Furthermore, the strong junction at the cathode and electrolyte interface does not peel off during charge and discharge over a long period of 623 cycles. Ex situ X-ray photoelectron spectroscopy revealed partial Fe⁴⁺ induction and a reversible charge and discharge reaction even after overcharging to 9 V. It was demonstrated that Na₂FeP₂O₇ is very stable against overcharging to 9 V.     

Estimation of compound classes in coal hydrogenation liquids by thin-layer chromatography

Compound classes in coal liquids were investigated by thin-layer chromatography coupled with a flame ionization detector (t.l.c.-f.i.d.). Individual t.l.c. peaks for coal liquids were identified as paraffins, aromatics, polar compounds and more strongly polar compounds or asphaltenes in order of increasing R_f values by comparison with specific compounds separated previously by conventional liquid chromatography. Concentrations of compound classes for a series of samples obtained by varying the hydrogenation time were estimated and good agreement was found with the results obtained by the USBM-API 60 liquid chromatography procedure. By using the t.l.c.-f.i.d. method, the relation of distribution of compound classes to the reaction conditions of coal hydrogenation could be derived quantitatively with relative ease.     

Optimization of magnesium hydroxide composite material mixed with expanded graphite and calcium chloride for chemical heat pumps

A composite chemical heat storage material (EMC) comprising a mixture of expanded graphite (EG), magnesium hydroxide (Mg(OH)₂), and calcium chloride (CaCl₂) was developed as a magnesium oxide/water chemical heat pump reactant. The optimization of a mixing weight ratio between the Mg(OH)₂ content of EMC and EMC itself was discussed from the viewpoints of both heat storage capacity and reactivity by considering the reaction rate constants from a kinetic analysis. It was confirmed that the dehydration reactivity of EMC increased as the mixing weight ratio decreased; however, the heat capacity of the EMC unit mass decreased. A multiplied factor consisting of the multiplied value dehydration rate constant and mixing weight ratio was introduced. It was suggested that a weight ratio of approximately 0.80 was the optimized value when the mixing molar ratio between CaCl₂ and Mg(OH)₂ was 0.10. Dehydration of EMC with an optimized mixing weight ratio and dehydration of pure Mg(OH)₂ were conducted under various temperatures to compare the reaction rate constants of each material. From this study, it was demonstrated that EMC performed better on dehydration than pure Mg(OH)₂.     

Sintering Kinetics at Isothermal Shrinkage: II, Effect of Y2O3 Concentration on the Initial Sintering Stage of Fine Zirconia Powder

The shrinkage behavior of fine zirconia powders containing 2.9 and 7.8 mol% Y₂O₃ was investigated to clarify the effect of Y₂O₃ concentration on the initial sintering stage. The shrinkage of powder compact was measured under both conditions of constant rates of heating (CRH) and constant temperatures. CRH measurements revealed that when the Y₂O₃ concentration of fine zirconia powder increased, the starting temperature of shrinkage shifted to a high temperature. Isothermal shrinkage measurements revealed that the increase in Y₂O₃ concentration causes the shrinkage rate to decrease. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. When the Y₂O₃ concentration increases, both Q and β₀ of diffusion increase. It is, therefore, concluded that the increase in Y₂O₃ concentration of fine zirconia powder decreases the shrinkage rate because of increasing Q of diffusion at the initial stage of sintering.     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.     

Effect of fasting subjects'' posture on 13C-urea breath test for detection of Helicobacter pylori infection

HIV-associated salivary gland disease (HIV-SGD) includes lymphoepithelial lesions and cysts involving the salivary gland tissue and/or intraglandular lymph nodes, and Sj?gren-like conditions. Three cases of salivary gland disease occurring in HIV-infected patients are reported. Histopathological examination showed squamous epithelium-lined cysts. In the walls of the cysts lymphoid tissue, epitheloid granulomas and giant cells were found. The clinical and histopathological criteria as well as magnetic resonance imaging and therapy are discussed.     

Unique Features of Mobile Commerce

While the market potentials and impacts of web-based e-commerce are still in the ascendant, the advances in wireless technologies and mobile networks have brought about a new business opportunity and research attention, what is termed mobile commerce. Commonly, mobile commerce is considered to be another new application of existing web-based e-commerce onto wireless networks, but as an independent business area, mobile commerce has its own advantages and challenges as opposed to traditional e-commerce applications. This paper focuses on exploring the unique features of mobile commerce as compared with traditional e-commerce. Also, there are still some limitations arisen in m-commerce in contrast to web-based e-commerce. Finally, current state of mobile commerce in Japan is presented in brief, with an introduction of several cases involving mobile commerce applications in today's marketplace.