加压下液体过热的亚稳态

本文用液滴悬浮法测定了十四种碳氢化合物的加压情况下的过热极限，并经筛选由ｍｖｄＷ方程对过热极限进行了预测，发现两者符合较好。     

综合门户网站专业频道如何垂直化发展

近年来,互联网行业的竞争越演越烈。综合门户网站的专业频道如何能在激烈的角逐中脱颖而出、做大做强？本文着重探讨综合门户网站专业频道的发展方向——垂直化。用户的需求和运营的需求达到双赢,才是互联网发展的最终出路。行业垂直门户网站的发展为我们提供了借鉴,个人认为,综合网站专业频道发展的终极目标就是要将各个频道做成一个个小型行业垂直门户,才能最终带动起整个综合网站的发展。     

Voltammetric study of electrocatalysis for dioxygen reduction by trinuclear rutheniumammine complex confined in a polymer membrane

Electrocatalytic O₂ reduction was studied using a modified electrode coated with a Nafion membrane (Nf) dispersing a trinuclear ruthenium ammine complex ([(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]Cl₆, Ru-red). When measuring cyclic voltammogram under O₂ atmosphere (at 0.5 mV s⁻¹), catalytic currents due to O₂ reduction were found to develop below −0.2 V (vs. Ag/AgCl). Since Ru-red undergoes irreversible decomposition into the mononuclear complexes via the reduced state (Ru^III-Ru^III-Ru^III) (∼−0.1 V), it is suggested that the electrocatalysis originates from the decomposed species (initial active species: Ru^II(NH₃)₅(OH₂) and Ru^II(NH₃)₄(OH₂)₂) rather than from the Ru-red. Although the present electrocatalyst was also applied to H₂O₂ reduction system, the catalytic activity was found to be poor from the voltammetric behavior. It appeared that the kinetics of the electrocatalysis is much faster in the O₂ reduction than in the H₂O₂ one. A selective and direct catalysis for O₂ reduction into H₂O was suggested from a ring-disk voltammogram to take place by an aggregate of the mononuclear ruthenium complexes in the polymer matrix. In addition, it was found that electrocatalytic O₂ reduction involves a slow kinetic process, so that factors affecting the overall kinetics were discussed in terms of the catalysis mechanism.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Web服务在电力系统DB2数据库存取中的应用

WebService是构建分布式系统的最好工具。研究了WebService的相关概念、结构以及主要支撑技术 ,并且通过微软VS Net提供的WebService实现了对电力系统DB2数据库的存取方案。实践验证 ,这种方法完成存取过程是完全可行并且有效的 ,为电力系统数据的分布处理提供有益的参考 ,使电力系统中非常庞大的数据量得到快速高效的处理 ,为电力系统安全、稳定、经济运行提供保障。     

A single solution method for converting 2D assembly drawings to 3D part drawings

Although solid models play a central role in modern CAD systems, 2D CAD systems are still commonly used for designing products without complex curved faces. Therefore, an important task is to convert 2D drawings to solid models, and this is usually carried out manually even in present CAD systems. Many methods have been proposed to automatically convert orthographic part drawings of solid objects to solid models. Unfortunately, products are usually drawn as 2D assembly drawings, and therefore, these methods cannot be applied. A further problem is the difficult and time-consuming task of decomposing 2D assembly drawings into 2D part drawings. In previous work, the authors proposed a method to automatically decompose 2D assembly drawings into 3D part drawings, from which 2D part drawings can be easily generated. However, one problem with the proposed method was that the number of solutions could easily explode if the 2D assembly drawings became complex. Building on this work, here we describe a new method to automatically convert 2D assembly drawings to 3D part drawings, generating a unique solution for designers regardless of the complexity of the original 2D assembly drawings. The only requirement for the approach is that the assembly drawings consist of standard parts such as bars and plates. In 2D assembly drawings, the dimensions, part numbers and parts lists are usually drawn, and the proposed method utilizes these to obtain a unique solution.     

Processing of nanolitre liquid plugs for microfluidic cell-based assays

Plugs, i.e. droplets formed in a microchannel, may revolutionize microfluidic cell-based assays. This study describes a microdevice that handles nanolitre-scale liquid plugs for the preparation of various culture setups and subsequent cellular assays. An important feature of this mode of liquid operation is that the recirculation flow generated inside the plug promotes the rapid mixing of different solutions after plugs are merged, and it keeps cell suspensions homogeneous. Thus, serial dilutions of reagents and cell suspensions with different cell densities and cell types were rapidly performed using nanolitres of solution. Cells seeded through the plug processing grew well in the microdevice, and subsequent plug processing was used to detect the glucose consumption of cells and cellular responses to anticancer agents. The plug-based microdevice may provide a useful platform for cell-based assay systems in various fields, including fundamental cell biology and drug screening applications.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Predator Avoidance by Phytophagous Mites is Affected by the Presence of Herbivores in a Neighboring Patch

When predators invade a leaf patch inhabited by herbivores, the herbivores disperse to a neighboring predator-free leaf patch, thus escaping from the predators. However, the neighboring patch might already be used by con- or heterospecific herbivores. We used laboratory bioassays to examine whether perception of odor from con- or heterospecific competitors on a neighbored lima bean leaf patch influences dispersal behavior of the herbivorous mite Tetranychus urticae when attacked by predatory mites Phytoseiulus persimilis. The dispersal rates of T. urticae that perceived odors from leaf patches infested by conspecifics or cowpea aphids (Aphis craccivora) did not differ from the control (the dispersal rate of T. urticae that perceived odor from uninfested leaf patches). By contrast, the dispersal rate of T. urticae was reduced when they perceived odors from leaf patches that were currently or had previously been infested by larvae of the common cutworm (Spodoptera litura). Previous herbivory by S. litura larvae induced resistance in leaf patches to T. urticae as indicated by the reduced number of eggs laid by T. urticae. Our results are discussed with respect to the feeding behavior of the tested competitors of T. urticae and the impact of the plant and arthropod community on the dispersal behavior of these mites.     

Mechanism of elongation of gold or silver nanoparticles in silica by irradiation with swift heavy ions

It has been reported that elongated Au nanoparticles oriented parallel to one another can be synthesized in SiO₂ by ion irradiation. Our aim was to elucidate the mechanism of this elongation. We prepared Au and Ag nanoparticles with a diameter of 20 nm in an SiO₂ matrix. It was found that Au nanoparticles showed greater elongated with a higher flux of ion beam and with thicker SiO₂ films. In contrast, Ag nanoparticles split into two or more shorter nanorods aligned end to end in the direction parallel to the ion beam. These experimental results are discussed in the framework of a thermal spike model of Au and Ag nanorods embedded in SiO₂. The lattice temperature exceeds the melting temperatures of SiO₂, Au and Ag for 100 ns after one 110 MeV Br¹⁰⁺ ion has passed through the middle of an Au or Ag nanorod.