Microstructural Investigation on Failure of Internal Drive Shaft

17-4 PH stainless steel is used as internal drive shaft material in liquid engine pumps. One of the drive shafts failed during operation. The shaft pieces were in contact for short duration after failure, which has resulted in abrasion of fractured surfaces. Samples from the location of failure were taken, and investigation of the failure was carried out using optical and scanning electron microscopy. The microstructural analysis of the material and fractographic analysis of the fractured surface show that the failure was caused by excessive torsion.     

High-rate vector quantization for detection

We investigate high-rate quantization for various detection and reconstruction loss criteria. A new distortion measure is introduced which accounts for global loss in best attainable binary hypothesis testing performance. The distortion criterion is related to the area under the receiver-operating-characteristic (ROC) curve. Specifically, motivated by Sanov's theorem, we define a performance curve as the trajectory of the pair of optimal asymptotic Type I and Type II error rates of the most powerful Neyman-Pearson test of the hypotheses. The distortion measure is then defined as the difference between the area-under-the-curve (AUC) of the optimal pre-encoded hypothesis test and the AUC of the optimal post-encoded hypothesis test. As compared to many previously introduced distortion measures for decision making, this distortion measure has the advantage of being independent of any detection thresholds or priors on the hypotheses, which are generally difficult to specify in the code design process. A high-resolution Zador-Gersho type of analysis is applied to characterize the point density and the inertial profile associated with the optimal high-rate vector quantizer. The analysis applies to a restricted class of high-rate quantizers that have bounded cells with vanishing volumes. The optimal point density is used to specify a Lloyd-type algorithm which allocates its finest resolution to regions where the gradient of the pre-encoded likelihood ratio has greatest magnitude.     

Preparation of ion‐exchange membranes by hydrolysis of radiation‐grafted polyethylene‐g‐polyacrylamide membranes

Polyethylene‐g‐polyacrylamide membranes were prepared by graft polymerization of acrylamide onto polyethylene films using a preirradiation method. The ion‐exchange membranes were obtained by the hydrolysis of grafted films so as to transform amide groups into carboxyl groups. The fraction of amide groups transformed into carboxyl groups was limited to ～0.5. The characterization and thermal behavior of membranes with different degrees of grafting were evaluated by FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) measurements. The heat of fusion and the crystallinity of polyethylene decreased considerably in the hydrolyzed membranes depending on the degree of grafting. It was found that the grafting of acrylamide led to the reduction in crystallinity due to disruption of the crystallites (crystal defects) and dilution of the inherent crystallinity (dilution effect). The contribution of the hydrolysis step to the crystallinity decrease was negligible. The thermal stability of the membranes as obtained from TGA showed considerable enhancement after hydrolysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 149–154, 2003     

Power gain in feedback amplifiers, a classic revisited

A tutorial review of a classic paper by Samuel J. Mason (1954) is described. That paper contained the first definition of a unilateral power gain for a linear two-port and the first proof that this grain is invariant with respect to linear lossless reciprocal four-port embeddings, thereby making it useful as a figure of merit intrinsic to the device. In this work, that original paper is brought up to date, a tutorial exposition of its contents is presented in a modern form, and its significance and applications in microwave engineering are discussed. The subsequent advances in the subject area are summarized, so that the original paper can be placed within a broader context and understood with a more general perspective     

Human papillomavirus investigation of patients with cervical intraepithelial neoplasia 3, some of whom progressed to invasive cancer

Unstable expansion of the CTG repeats in the 3' untranslated region encoding a member of the protein kinase family in the q13.3 band on chromosome 19 is a mutation specific for myotonic dystrophy. To examine the correlation between clinical expression and CTG trinucleotide repeat length, we carried out Southern blot analysis in a family with myotonic dystrophy. In this pedigree, the expanded CTG repeats were transmitted maternally. The mother had three female children. The mother had about 200 CTG repeats, and the number of repeats for each child was about 800, 1500 and 1600 in birth order. The mother and the patient with 800 repeats were unaware of muscle weakness or myotonia. Symptoms were present from age 3 years in the patient with 1500 repeats and from birth in the one with 1600 repeats. Although the mother menstruated regularly, the patients with 800 and 1500 repeats both menstruated irregularly, and the one with 1600 repeats has never menstruated. The age of onset and severity of the disease were correlated with the size of the expanded repeats. Endocrinological studies revealed that the basal levels of the gonadotropins, PRL and E2 were within normal range, and a pituitary response to LHRH was observed. These data suggest that the amenorrhea and menstrual irregularities were caused by a suprahypophyseal dysfunction. When expanded CTG repeats are transmitted maternally, abnormal products resulting from the metabolic disturbance in the affected mother may harm the fetus in utero. A heterozygous fetus, who has more CTG repeats, may be unable to metabolize the pathologic products sufficiently and therefore may become more severely affected. This may explain the exclusive maternal transmission of congenital myotonic dystrophy.     

Compatibility and activity of aldesleukin (recombinant interleukin-2) in presence of selected drugs during simulated Y-site administration: evaluation of three methods

The compatibility and biological activity of aldesleukin (a form of recombinant interleukin-2) in the presence of selected i.v. drugs during simulated Y-site administration was studied. Five milliliters of aldesleukin 33,800 IU/mL in 5% dextrose injection was mixed in glass test tubes with 5 mL of each of 19 i.v. drugs prepared at concentrations used in routine clinical practice. The compatibility of the combinations was assessed by visual examination and spectrophotometry at 0, 0.5, 1, and 2 hours after preparation, and bioassays were conducted to determine the activity of aldesleukin in the combinations. Lorazepam was the only drug visually incompatible with aldesleukin. All the secondary drugs were spectrophotometrically compatible with aldesleukin. However, the bioassays showed that the following drugs reduced the activity of aldesleukin: ganciclovir sodium, lorazepam, pentamidine isethionate, prochlorperazine edisylate, and promethazine hydrochloride. Thus, aldesleukin became less biologically active when combined with four drugs for which visual examination suggested compatibility and when combined with five drugs for which spectrophotometry indicated compatibility. Aldesleukin 33,800 IU/mL in 5% dextrose injection lost significant biological activity in the presence of prochlorperazine edisylate, promethazine hydrochloride, lorazepam, ganciclovir sodium, and pentamidine isethionate during simulated Y-site administration. Visual assessment and spectrophotometry may not be valid methods for assessing possible changes in the biological activity of aldesleukin when combined with other agents.     

Test Generation for Crosstalk-Induced Faults: Framework and Computational Results

Due to technology scaling and increasing clock frequency, problems due to noise effects lead to an increase in design/debugging efforts and a decrease in circuit performance. This paper addresses the problem of efficiently and accurately generating two-vector tests for crosstalk induced effects, such as pulses, signal speedup and slowdown, in digital combinational circuits. These noise effects can propagate through a circuit and create a logic error in a latch or at a primary output. We have developed a mixed-signal test generator, called XGEN, that incorporates classical static values as well as dynamic signals such as transitions and pulses, and timing information such as signal arrival times, rise/fall times, and gate delay. In this paper we first discuss the general framework of the test generation algorithm followed by computational results. Comparison of results with SPICE simulations confirms the accuracy of this approach.     

On development of a finite dynamic element and solution of associated eigenproblem by a block Lanczos procedure

The paper first presents the details of the development of a new six-noded plane triangular finite dynamic element. A block Lanczos algorithm is developed next for the accurate and efficient solution of the quadratic matrix eigenvalue problem associated with the finite dynamic element formulation. The resulting computer program fully exploits matrix sparsity inherent in such a discretization and proves to be most efficient for the extraction of the usually required first few roots and vectors, including repeated ones. Most importantly, the present eigenproblem solution effort is shown to be comparable to that of the corresponding finite element analysis, thereby rendering the associated dynamic element method rather attractive owing to superior convergence characteristics of such elements, presented herein.     

A meta-analytic review of the relationship between absence and turnover.

A meta-analysis that combined 33 correlations from 17 studies found a corrected average correlation of .330 between absence and turnover. The type of absence measure did not moderate the covariation between absence and turnover, but industry type and study duration did act as moderators. The results are discussed in the context of the "withdrawal" approach to understanding employee behaviors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A finite range failure model

In the present article the characterstics of a finite range failure time distribution, that includes the rectangular distribution as a particular case, are studied. When shape parameter surpass unity then the distribution is IFR otherwise it always remains IFRA. A graphic shape of the distribution is also formed for certain admissible values of the constants.