Effects of reducing and oxidizing atmospheres on the PTCR characteristics of porous n-BaTiO3 ceramics by adding polyethylene glycol

Donor doped BaTiO₃ (n-BaTiO₃) ceramics were fabricated by adding polyethylene glycol (PEG) at 20 wt %. The effects of reducing and oxidizing atmospheres on the PTCR characteristics of the porous n-BaTiO₃ ceramics were investigated. The PTCR characteristics of the porous n-BaTiO₃ ceramics is strongly affected by chemisorbed oxygen at the grain boundaries and are recovered as the atmosphere is changed from the reducing gas to oxidizing gas. The low room-temperature resistivity of the porous n-BaTiO₃ ceramics in reducing atmospheres may be caused by the decrease in potential barrier height, which originates from an increase in the number of electrons owing to the desorption of chemisorbed oxygen atoms at the grain boundaries. In addition, the high room-temperature resistivity of the porous n-BaTiO₃ ceramics in oxidizing atmospheres may be caused by the increase in potential barrier height, which results from the adsorption of chemisorbed oxygen atoms at the grain boundaries.     

Solving matrix diophantine equations by inverting a square nonsingular system of equations

A method for solving the Diophantine equation using a nonsingular matrix equation system is proposed in this note. A scheme of setting up a system with the same number of variables as equations is described. An analytical approach to ensure the invertibility of the system formed is given. Examples presented show the simplicity of the method.     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

Interference characterization in the unlicensed band

We consider performance of a wireless communication receiver in the presence of a field of continuous wave (CW) interferers that are randomly distributed according to a Poisson process in space and frequency domain in the unlicensed band. From our theoretical model, we derive an accurate analytical expression for average bit error rate (BER). Judging from our results for a strong desired signal, when the user density grows up to ten times its value for a given signal to noise ratio (SNR), BER performance falls by 9.09% and 8.51 % for BPSK and DPSK respectively.     

A biomorphic digital image sensor

An arbitrated address-event imager has been designed and fabricated in a 0.6-/spl mu/m CMOS process. The imager is composed of 80 /spl times/ 60 pixels of 32 /spl times/ 30 /spl mu/m. The value of the light intensity collected by each photosensitive element is inversely proportional to the pixel's interspike time interval. The readout of each spike is initiated by the individual pixel; therefore, the available output bandwidth is allocated according to pixel output demand. This encoding of light intensities favors brighter pixels, equalizes the number of integrated photons across light intensity, and minimizes power consumption. Tests conducted on the imager showed a large output dynamic range of 180 dB (under bright local illumination) for an individual pixel. The array, on the other hand, produced a dynamic range of 120 dB (under uniform bright illumination and when no lower bound was placed on the update rate per pixel). The dynamic range is 48.9 dB value at 30-pixel updates/s. Power consumption is 3.4 mW in uniform indoor light and a mean event rate of 200 kHz, which updates each pixel 41.6 times per second. The imager is capable of updating each pixel 8.3K times per second (under bright local illumination).     

Bias-temperature instabilities of polysilicon gate HfO/sub 2/ MOSFETs

Bias-temperature instabilities (BTI) of HfO/sub 2/ metal oxide semiconductor field effect transistors (MOSFETs) have been systematically studied for the first time. NMOS positive BTI (PBTI) exhibited a more significant V/sub t/ instability than that of PMOS negative BTI (NBTI), and limited the lifetime of HfO/sub 2/ MOSFETs. Although high-temperature forming gas annealing (HT-FGA) improved the interface quality by passivating the interfacial states with hydrogen, BTI behaviors were not strongly affected by the technique. Charge pumping measurements were extensively used to investigate the nature of the BTI degradation, and it was found that V/sub t/ degradation of NMOS PBTI was primarily caused by charge trapping in bulk HfO/sub 2/ rather than interfacial degradation. Deuterium (D/sub 2/) annealing was found to be an excellent technique to improve BTI immunity as well as to enhance the mobility of HfO/sub 2/ MOSFETs.     

A novel discrete control strategy for independent stabilization of parallel three-phase boost converters by combining space-vector modulation with variable-structure control

We propose a discrete nonlinear controller, developed in a synchronous frame, for a parallel three-phase boost converter consisting of two modules. The basic idea, however, can be extended to a system with N modules. Each of the closed-loop power-converter modules operates asynchronously without any communication with the other modules. The controller stabilizes the currents on the dq-axes and limits the flow of the pure-zero sequence current. It combines the space-vector modulation scheme with a variable-structure control, thereby keeping the switching frequency constant and achieving satisfactory dynamic performance.     

Influence of eccentricity on the frequency limitations of circular-pad via-holes

We study the influence of the technologically caused eccentricity of a circular-pad via-hole. We derive an eigenvalue equation using a rigorous method based on a linear transformation of the via-hole polar coordinates. The eigenvalue equation is used to compute the modal resonant frequencies and the modal fields of the eccentric via. It is shown that the via-hole misalignment shifts the modal frequencies and influences its frequency band. The proposed model is verified with published experimental data, and is also compared with results generated with the full-wave simulator Agilent Momentum-2002.