An Effective Approach on Attaining Enhanced Silicon Solar Cell Performance Through Sputter Deposited Perovskite Thin Films

Silicon - Antireflection coatings (ARCs) have become one of the key techniques for mass production of Si solar cells. They are generally performed by vacuum processes such as thermal evaporation,...     

Dynamic Effect of Soil-Tunnel Interface Under Dynamic Loading

Soil Mechanics and Foundation Engineering - The resilience of the Daikai subway station during the Kobe earthquake is taken as a case study of tunnel endurance at various points under different...     

Experimental investigation of lift enhancement by suction-assisted delayed separation of the boundary layer on NACA 0012 airfoil

In the aerodynamic industry, one of the major problems of interest is the lift enhancement without any increase in the drag. In this paper, an attempt is made to increase the lift coefficient by delayed boundary layer separation using suction at various points, also the study is carried out to identify the optimum location for suction which provides maximum lift augmentation. The experiment is conducted with selected suction pressures of 60, 70, 80, 90?kN/m² at different locations in the range of 40–75% of the chord length of the airfoil. Among the selected pressures, the lowest one at the 70% length provides maximum performance. The critical Reynolds number occurs at around 95% of the length instead of 45% of the length when the same experiment is conducted without suction. The suction also assists in the heat transfer enhancement over the airfoil surface.     

Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties

Metal Science and Heat Treatment - Ti – Zr-based alloys with a high zirconium content prepared by vacuum-arc remelting with nonconsumable tungsten electrode are studied. The optimum number of...     

Effect of Heat Treatment on Dendritic Segregation and High-Temperature Strength of Single Crystals of Ni3Al-Base Rhenium-Alloyed Intermetallic Alloys

Metal Science and Heat Treatment - The nature of stability of dendritic microsegregation of rhenium in single crystals of intermetallic (γ′ + γ) alloys based on γ′-Ni3Al...     

Qualitative Evolution of Asymmetric Raman Line-Shape for NanoStructures

A qualitative evolution of an asymmetric Raman line-shape function from a Lorentzian line-shape is discussed here for application in low dimensional semiconductors. The step-by-step evolution reported here is based on the phonon confinement model which is successfully used in literature to explain the asymmetric Raman line-shape from semiconductor nanostructures. Physical significance of different terms in the theoretical asymmetric Raman line-shape has been explained here. Better understanding of theoretical reasoning behind each term allows one to use the theoretical Raman line-shape without going into the details of theory from first principle. This will enable one to empirically derive a theoretical Raman line-shape function for any material if information about its phonon dispersion relation, size dependence, etc., is known.     

Feasibility of Using Titanium Machine Turnings in Powder Metallurgy Processes

JOM - The use of titanium machine turnings has been identified as a possible ultralow-cost method to produce titanium powder. However, very little data are available on the viability of this...     

Functional Composite Adsorbents Based on Metal-Organic Frameworks in a Carbon Matrix Applied for Methane Storage

Protection of Metals and Physical Chemistry of Surfaces - In the present work, a method for producing new shaped composite materials by introducing a metal-organic framework structure Cu-BTC110...     

Thickness and scratch resistance of adsorbed film formed by triblock symmetrical copolymer solutions

The thickness and scratch resistance of adsorbed films formed on mild steel samples (MS1020), which have been immersed in water copolymer solutions, are reported. The effects of bulk temperature and the copolymer structures, normal, poly(ethylene oxide)_m‐poly(propylene oxide)_n‐poly(ethylene oxide)_m, and reverse, poly(propylene oxide)_n‐poly(ethylene oxide)_m‐poly(propylene oxide)_n, are elucidated. The films' thicknesses are independent of structure but not of temperature. The adsorbed films of above cloud point solutions are thicker than below cloud point. However, nanoscratch experiments carried out to measure the scratch resistance of the films reveal that despite of thicker film formed by above cloud point solutions, it is relatively more prone to being detached than the thinner films of below cloud point solutions. The effect of extreme pressure additive, alkyl phosphate ester (APE), is also investigated suggesting the normal copolymer has comparable scratch resistance with APE when used at below the cloud point. Copyright © 2016 John Wiley & Sons, Ltd.