Perovskite SrFe1-xTixO3-δ (x < = 0.1) cathode for low temperature solid oxide fuel cell

Stable and compatible cathode materials are a key factor for realizing the low-temperature (LT, ≤600?°C) operation and practical implementations of solid oxide fuel cells (SOFCs). In this study, perovskite oxides SrFe_1-xTi_xO_3-δ (x?< = 0.1), with various ratios of Ti doping, are prepared by a sol-gel method for cathode material for LT-SOFCs. The structure, morphology and thermo-gravimetric characteristics of the resultant SFT powders are investigated. It is found that the Ti is successfully doped into SrFeO_3-δ to form a single phase cubic perovskite structure and crystal structure of SFT shows better stability than SrFeO_3-δ. The dc electrical conductivity and electrochemical properties of SFT are measured and analysed by four-probe and electrochemical impedance spectra (EIS) measurements, respectively. The obtained SFT exhibits a very low polarization resistance (R_p), .01 Ωcm² at 600?C. The SFT powders using as cathode in fuel cell devices, exhibit maximum power density of 551?mW?cm^?2 with open circuit voltage (OCV) of 1.15?V at 600?C. The good performance of the SFT cathode indicates a high rate of oxygen diffusion through the material at cathode. By enabling operation at low temperatures, SFT cathodes may result in a practical implementation of SOFCs.     

Radiation and slip effects on MHD Maxwell nanofluid flow over an inclined surface with chemical reaction

The numerical solutions of the upper-convected Maxwell (UCM) nanofluid flow under the magnetic field effects over an inclined stretching sheet has been worked out. This model has the tendency to elaborate on the characteristics of “relaxation time” for the fluid flow. Special consideration has been given to the impact of nonlinear velocity slip, thermal radiation and heat generation. To study the heat transfer, the modified Fourier and Fick's laws are incorporated in the modeling process. The mass transfer phenomenon is investigated under the effects of chemical reaction, Brownian motion and thermophoresis. With the aid of the similarity transformations, the governing equations in the ordinary differential form are determined and then solved through the MATLAB's package “bvp4c” numerically. This study also brings into the spotlight such crucial physical parameters, which are inevitable for describing the flow and heat transfer behavior. This has been done through graphs and tables with as much precision and exactitude as is possible. The ascending values of the magnetic parameter, the Maxwell parameter and the angle of the inclined stretching sheet cause decay in the dimensionless velocity while an assisting behavior of the thermal and concentration buoyancy parameters is noticed.     

Proton Nuclear Magnetic Resonance-Based Method for the Quantification of Epoxidized Methyl Oleate

Epoxidized methyl esters (EMO) with their high oxirane ring reactivity, acts as a raw material in the synthesis of various industrial chemicals including polymers, stabilizers, plasticizers, glycols, polyols, carbonyl compounds, biolubricants etc. EMO has been generally quantified by the gas chromatography (GC) and high-performance liquid chromatography (HPLC) techniques. Taking into the account of the limitations of these techniques, two qHNMR-based equations have been proposed for the quantification of EMO in the mixture of EMO and methylesters (MO). The validity of the proposed method was determined using standard mixtures of MO and EMO having different molar concentrations. The developed equations have been applied on the samples of EMO prepared from oleic acid in two-step process viz., esterification followed by epoxidation. The qHNMR-based EMO quantification showed acceptable agreement with the results obtained from HPLC analysis.     

An Investigation of Low Velocity Impact Properties of Rotationally Molded Skin–Foam–Skin Sandwich Structure

In this study, the low velocity impact properties of rotationally molded skin–foam–skin sandwich structures were investigated experimentally since there is a need for a greater understanding of the impact behavior of these composites in service to extend the range of their applications. Polyethylene rotationally molded sandwich structures were manufactured at various skin and core layer thickness combinations and tested using an instrumented low velocity drop weight impact testing machine at 20–100 J impact energy levels, at room temperature. This allowed the identification of the impact response, failure mode, and the effects of the skin and core layer thickness on impact resistance. Force–deflection curves, maximum force, contact time, maximum deflection versus impact energy curves were analyzed. Samples were seen to fail due to the indentation dart piercing the upper and lower skins, with crushing and consolidation seen in the core foamed layer. Delamination at the core/skin interface was not observed. It was found that fracture initiates from the lower skin and then continues to grow to the upper skin via the foamed core layer. The impact resistance was noted to increase with increasing skin and core layer thickness; though an increase in skin layer thickness had a greater contribution than an increase in the core layer thickness. POLYM. ENG. SCI., 60: 387–397, 2019. © 2019 Society of Plastics Engineers     

Synthesis of Novel Tetra(µ3-Methoxo) Bridged with [Cu(II)-O-Cd(II)] Double-Open-Cubane Cluster: XRD/HSA-Interactions,Spectral and Oxidizing Properties

A new double-open-cubane core Cd(II)-O-Cu(II) bimetallic ligand mixed cluster of type [Cl₂Cu₄Cd₂(NNO)₆(NN)₂(NO₃)₂].CH₃CN was made available in EtOH/CH₃CN solution. The 1-hydroxymethyl-3,5-dimethylpyrazole (NNOH) and 3,5-dimethylpyrazole (NNH) act as N,O-polydentate anion ligands in coordinating the Cu(II) and Cd(II) centers. The structure of the cluster in the solid state was proved by XRD study and confirmed in the liquid state by UV-vis analysis. The XRD result supported the construction of two octahedral and one square pyramid geometries types around the four Cu(II) centers and only octahedral geometry around Cd(II) two centers. Interestingly, NNOH ligand acts as a tetra-µ³-oxo and tri-µ²-oxo ligand; meanwhile, the N-N in NNH acts as classical bidentate anion/neutral ligands. The interactions in the lattice were detected experimentally by the XRD-packing result and computed via Hirschfeld surface analysis (HSA). The UV-vis., FT-IR and Energy Dispersive X-ray (EDX), supported the desired double-open cubane cluster composition. The oxidation potential of the desired cluster was evaluated using a 3,5-DTB-catechol 3,5-DTB-quinone as a catecholase model reaction.     

Estimating the Aquifer’s Renewable Water to Mitigate the Challenges of Upcoming Megadrought Events

Water Resources Management - In arid and semi-arid regions of the world, the occurrence of prolonged drought events (megadroughts) associated with climate change can seriously affect the balance...     

Ethanol shock enhances the recovery of anthocyanin from lowbush blueberry

Deactivation of polyphenol oxidase (PPO) in natural products is essential for downstream processing of functional molecules used as food or food additives, particularly those served as antioxidants. In the present work, we identified two proteins with PPO activity from lowbush blueberry using ammonium sulphate precipitation and chromatography procedures. Deactivation of these proteins was studied using aqueous solutions of ethanol of different concentrations. The PPO activity was recovered after ethanol removal for the protein samples previously soaked in a low concentration ethanol solution. A complete and unrecoverable deactivation of the proteins was achieved using ethanol with concentration over 70% (v/v), as manifested by the significant changes in circular dichroism (CD) and fluorescence spectroscopy measurements. Based on these findings, we propose a new extraction process for blueberry anthocyanin, in which an ethanol shock, i.e. soaking blueberry fruit in a 70% (v/v) ethanol solution for 1 h, is implemented before subsequent procedures. This new process increases the anthocyanin yield by 55% in comparison to that without the ethanol shock.     

Effect of Molybdenum on Metallurgical and Wear Properties of Fe–Cr–C Hard facing alloy

Protection of Metals and Physical Chemistry of Surfaces - In this research, Surface hardening was performed by two types of Flux Cored Arc Welding (FCAW) filler metals based on Fe–Cr–C...