A novel part-based approach to mean-shift algorithm for visual tracking

Visual tracking is one of the most important problems considered in computer vision. To improve the performance of the visual tracking, a part-based approach will be a good solution. In this paper, a novel method of visual tracking algorithm named part-based mean-shift (PBMS) algorithm is presented. In the proposed PBMS, unlike the standard mean-shift (MS), the target object is divided into multiple parts and the target is tracked by tracking each individual part and combining the results. For the part-based visual tracking, the objective function in the MS is modified such that the target object is represented as a combination of the parts and iterative optimization solution is presented. Further, the proposed PBMS provides a systematic and analytic way to determine the scale of the bounding box for the target from the perspective of the objective function optimization. Simulation is conducted with several benchmark problems and the result shows that the proposed PBMS outperforms the standard MS.

     

In Vitro hydrodynamic evaluation of prosthetic polymer heart valves in steady flow

Hydrodynamic comparison of two polymer valves with two mechanical valves is presented. The valves were perfused in a steady flow system, and comparisons between the valves were made on the transvalvular pressure distribution and drop, opening area, and leakage volume. Particular emphasis was placed on a slit-type bileaflet polymer valve which was newly designed and fabricated in our research group. The results showed that the functional characteristics of a slit-type bileaflet polymer valve compared favorably with that of mechanical valves. This valve may be a viable and inexpensive alternative, especially for short-term use in TAH or VAD systems.     

Heat-Killed Enterococcus faecalis EF-2001 Induces Human Dermal Papilla Cell Proliferation and Hair Regrowth in C57BL/6 Mice

Minoxidil is the most widely used treatment for hair growth, but has been associated with several side effects. In this study, we investigated the effects of heat-killed Enterococcus faecalis EF-2001 on hair loss prevention and regrowth using human dermal papilla cells and male C57BL/6 mice. To examine the effects of EF-2001, we used minoxidil as the positive control. In the in vitro experiments, EF-2001 treatment (75–500 μg/mL) led to the proliferation of human dermal papilla cells in a concentration-dependent manner. In the in vivo experiment, the topical application of 200 µL EF-2001 on the dorsal surface of C57BL/6 male mice led to hair growth. Changes in hair regrowth were examined by visual comparison and hematoxylin and eosin staining of skin sections. We also determined the expression levels of marker genes (Wnt) and growth factors (fibroblast growth factor, insulin growth factor 1, and vascular endothelial growth factor) in the skin tissues of the back of each mouse using a quantitative polymerase chain reaction. EF-2001 accelerated the progression of hair regrowth in mice and promoted hair-follicle conversion from telogen to anagen, likely by increasing the expression levels of growth factors and marker genes.     

High-performance 94-GHz single balanced mixer using 70-nm MHEMTs and surface micromachined technology

We reported 94-GHz, low conversion loss, and high isolation single balanced active gate mixer based on 70-nm gate length InGaAs/InAlAs metamorphic high-electron mobility transistors (MHEMTs). This mixer showed that the conversion loss and isolation characteristics were 2.5/spl sim/3.5 dB and under -29 dB in the range of 92.95/spl sim/94.5 GHz, respectively. The low conversion loss of the mixer is mainly attributed to the high-performance of the MHEMTs exhibiting a maximum drain current density of 607 mA/mm, an extrinsic transconductance of 1015 mS/mm, a current gain cutoff frequency (f/sub t/) of 330 GHz, and a maximum oscillation frequency (f/sub max/) of 425 GHz. High isolation characteristics are due to hybrid ring coupler which adopted dielectric-supported air-gapped microstrip line structure using surface micromachined technology. To our knowledge, these results are the best performance demonstrated from 94 GHz single balanced mixer utilizing GaAs-based HEMTs in terms of conversion loss as well as isolation characteristics.     

Structure‐Properties Relationship in Iron Oxide‐Reduced Graphene Oxide Nanostructures for Li‐Ion Batteries

Non‐aqueous sol‐gel routes involving the reaction of metal oxide precursors in organic solvents (e.g., benzyl alcohol) at moderate temperature and pressure, offer advantages such as high purity, high reproducibility and the ability to control the crystal growth without the need of using additional ligands. In this paper, a study carried out on a series of iron oxide/reduced graphene oxide composites is presented to elucidate a structure‐properties relationship leading to an improved electrochemical performance of such composites. Moreover, it is demonstrated that the easy production of the composites in a variety of temperature and composition ranges, allows a fine control over the final particles size, density and distribution. The materials obtained are remarkable in terms of the particle's size homogeneity and dispersion onto the reduced graphene oxide surface. Moreover, the synthesis method used to obtain the graphene oxide clearly affects the performances of the final composites through the control of the restacking of the reduced graphene oxide sheets. It is shown that a homogeneous and less defective reduced graphene oxide enables good electrochemical performances even at high current densities (over 500 mAh/g delivered at current densities as high as 1600 mA/g). The electrochemical properties of improved samples reach the best compromise between specific capacity, rate capability and cycle stability reported so far.     

Strain effects in CdTe (111) epitaxial layers grown on GaAs (100) substrates by molecular beam epitaxy

Spectroscopic ellipsometry and photoreflectance measurements on CdTe/GaAs strained heterostructures grown by moleculclr beam epitaxy were carried out to investigate the effect of the strain and the dependence of the lattice parameter on the CdTe epitaxial layer thicknesses. Compressive strains exist in CdTe layers thinner than 2 μm. As the strain increases, the value of the critical-point energy shift increases linearly. These results indicate that the strains in the CdTe layers grown on GaAs substrates are strongly dependent on the CdTe layer thickness. Author to whom all correspondence should be addressed.     

Formal Proofs for the Security of Signcryption

Signcryption is an asymmetric cryptographic method that provides simultaneously both message confidentiality and unforgeability at a low computational and communication overhead. In this paper we propose realistic security models for signcryption, which give the attacker power to choose both messages/signcryptexts as well as recipient/sender public keys when accessing the signcryption/unsigncryption oracles of attacked entities. We then show that Zheng's original signcryption scheme is secure in our confidentiality model relative to the Gap Diffie-Hellman problem and is secure in our unforgeability model relative to a Gap version of the discrete logarithm problem. All these results are shown in the random oracle model.     

Measurements of coupling and reflection characteristics of butt-joints in passive waveguide integrated laser diodes

Amplified spontaneous emission (ASE) spectra of passive waveguide integrated lasers have been studied to estimate the coupling efficiency and the reflectivity at the butt-joints between active and passive waveguides. A new method has been proposed for the analysis of ASE to extract the coupling efficiency and reflectivity at the butt-joints. This method was applied experimentally to estimate the coupling and reflection of the passive waveguide integrated lasers with different amounts of vertical misalignments of active and passive waveguides.     

Multi-antenna scheme for high capacity transmission in the digital audio broadcasting

In this paper, we apply multi-antenna scheme to DAB system for high-rate transmission. In the MIMO-DAB system with a number of transmitting and receiving antennas increases the transmission rate efficiently with low multiplication operations. For channel estimation in the MIMO-DAB system, we propose a new PRS structure and evaluate the channel estimation performance. The proposed PRS structure can estimate multi-channel information based on the semi-blind processing. The performance of proposed PRS is compared with that of conventional training sequence employing Tarokh's transmission matrix. And also we investigate the performance limitation due to the imperfect channel estimation in a MIMO-DAB receiver. It has been shown that the MIMO-DAB system with multi-antennas can achieve the high-rate transmission for multimedia broadcasting and the performance of MIMO-DAB system is impaired by imperfect channel information.     

A Surface Tailoring Method of Ultrathin Polymer Gate Dielectrics for Organic Transistors: Improved Device Performance and the Thermal Stability Thereof

Tailoring the surface of the dielectric layer is of critical importance to form a good interface with the following channel layer for organic thin film transistors (OTFTs). Here, a simple surface treatment method is applied onto an ultrathin (<15 nm) organosilicon‐based dielectric layer via the initiated chemical vapor deposition (iCVD) to make it compatible with organic semiconductors without degrading its insulating property. A molecular‐thin oxide capping layer is formed on a 15 nm thick poly(1,3,5‐trimetyl‐1,3,5‐trivinyl cyclotrisiloxane) (pV3D3) by a brief oxygen plasma treatment. The capping layer greatly enhances the thermal stability of the dielectrics, without degrading the original mechanical flexibility and insulating performance of the dielectrics. Moreover, the surface silanol functionalities formed by the plasma treatment can also be utilized for the surface modification with silane compounds. The surface‐modified dielectrics are applied to fabricate low‐voltage operating (<5 V) pentacene‐based OTFTs. The highest field‐effect mobility of the device with the surface‐treated 15 nm thick pV3D3 is 0.59 cm² V^?1 s^?1, which is improved up to two times compared to the TFT with the pristine pV3D3. It is believed that the simple surface treatment method can widely extend the applicability of the highly robust, ultrathin, and flexible pV3D3 gate dielectrics to design the surface of the dielectrics to match well various kinds of organic semiconductors.