Microcellular foaming of polypropylene containing low glass transition rubber particles in an injection molding process

Microcellular foams in polypropylene containing rubber particles were produced in an injection molding process. The foams are generated because of the thermodynamic instability and are controlled by formation process. The effect of processing parameters on microcellular foaming was investigated in the injection molding process. Injection speed and pressure are less important factors but packing pressure plays an important role in controlling the foam density. A critical packing pressure, about 5 × 10⁶ Pa, was found to generate microcellular foams in our polypropylene material system. Rubber particles inside the polypropylene seem to stabilize the microcellular foams.     

Canada’s energy perspectives and policies for sustainable development

A regression analysis is performed to make projections for the Canadian energy production and consumption. These have been increasing and are projected to increase even further in the near future. The primary energy production and consumption are projected to increase by 52% and 34%, respectively, by 2025 over 2004 if business as usual. The amount of fossil energy resources is finite and the extraction, transportation and combustion of fossil fuels cause environmental pollution and climate change. On the other hand, energy plays an important role in the economic and social development of Canada. Canada can develop further from an energy balance point of view, but this alone cannot be sustainable, because of the negative consequences of the major energy use on the environment. Application of energy localization and diversification is a promising solution, but in order to reach that, better energy efficiency and more use of renewable energy are necessary. Instead of non-compulsory policies Canada’s policy approach should have more compulsory policies. Only then Canada can be made to develop further in a sustainable manner.     

Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

Triglyceride selectivity of immobilized <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis> lipase in interesterification

The triglyceride (fatty acid) selectivity of an immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) was investigated in lipase-catalyzed interesterification reactions between two nono-acid TG in n-hexane. Tristearin (tri-C18∶0) was used as a reference in a series of TG with saturated FA from tri-C4∶0 to tri-C20∶0, except for tri-C6∶0, and in a series of unsaturated FA from tri-C18∶1 to tri-C18∶3. The quantification was performed by HPLC, and different methods of selectivity evaluation were used. None of the methods used showed any significant differences between the performances of the lipase on the different TG, indicating that Lipozyme TL IM is nonselective toward FA or TG in the system used. A response surface design was used to investigate the influence of water activities (a _w ) and reaction temperatures on the reactivity of Lipozyme TL IM with a system of tripalmitin (tri-C16∶0) and trilaurin (tri-C12∶0) in n-hexane. An increase in temperature (40 to 60°C) was found to affect the reactivity of the lipase significantly. The reactivity of Lipozyme TL IM was unaffected by the change in a _w from 0.1130 to 0.5289. An increase in a _w only led to an increase in FFA formation.     

Ionene segmented block copolymers containing imidazolium cations: Structure-property relationships as a function of hard segment content

Imidazolium ionene segmented block copolymers were synthesized from 1,1′-(1,4-butanediyl)bis(imidazole) and 1,12-dibromododecane hard segments and 2000 g/mol PTMO dibromide soft segments. The polymeric structures were confirmed using ¹H NMR spectroscopy, and resonances associated with methylene spacers from 1,12-dibromododecane became more apparent as the hard segment content increased. TGA revealed thermal stabilities ≥250 °C for all imidazolium ionene segmented block copolymers. These ionene segmented block copolymers containing imidazolium cations showed evidence of microphase separation when the hard segment was 6-38 wt%. The thermal transitions found by DSC and DMA analysis found that the T_g and T_m of the PTMO segments were comparable to PTMO polymers, namely approximately −80 °C and 22 °C, respectively. In the absence of PTMO soft segments the T_g increased to 27 °C The crystallinity of the PTMO segments was further evidence of microphase separation and was particularly evident at 6, 9 and 20 wt% hard segment, as indicated in X-ray scattering. The periodicity of the microphase separation was well-defined at 20 and 38 wt% hard segment and found to be approximately 10.5 and 13.0 nm, respectively, for these ionenes wherein the PTMO soft segment is 2000 g/mol. Finally, the 38 and 100 wt% hard segment ionenes exhibited scattering from correlations within the hard segment on a length scale of approximately 2-2.3 nm. These new materials present structure on a variety of length scales and thereby provide various routes to controlling mechanical and transport properties.     

Model for microbiologically influenced corrosion potential assessment for the oil and gas industry

Corrosion is one of the major causes of failure in onshore and offshore oil and gas operations. Microbiologically influenced corrosion (MIC) is inherently more complex to predict, detect and measure because, for instance, the presence of biofilm and/or bacterial products is not sufficient to indicate active microbiological corrosion. The major challenge for current MIC models is to correlate factors that influence corrosion (i.e. chemical, physical, biological and molecular variables) with the potential of having MIC. Previous work has proposed the potential for MIC as a simple product of multiple factors, without fully considering the synergy or the interference among the factors. The present work proposes a network-based approach to analyse and predict MIC potential considering the complex interactions among a total of 60 influencing factors and 20 screening parameters. The proposed model has the ability to capture the complex interdependences and the synergic interactions of the factors used to assess MIC potential and uses an object-oriented approach based on a Bayesian Network. The model has been tested and verified using real data from a pipeline leakage incident that was a result of MIC. The proposed model constitutes a significant step in deepening the understanding of when MIC occurs and its predictability.

List of acronyms: APB: acid producing bacteria; Aw: water activity; BN: Bayesian network; MIC: microbiologically influenced corrosion; MMMs: molecular microbiological methods; NRB: nitrate-reducing bacteria; OOBN: object-oriented Bayesian network; PWRI: produced water re-injection; SPs: screening parameters; SRB: sulphate-reducing bacteria; SRPs: sulphate-reducing prokaryotes; TDSs: total dissolved solids     

Enhancing saccharification of Agave tequilana bagasse by oxidative delignification and enzymatic synergism for the production of hydrogen and methane

Agave tequilana bagasse is a suitable lignocellulosic residue for energy production. However, the presence of lignin and the heterogeneous structure of hemicellulose may hinder the availability of polysaccharides. In this work, the pretreatment of A. tequilana bagasse with alkaline hydrogen peroxide (AHP) followed by enzymatic saccharification with hemicellulases and cellulases was assessed for the removal of lignin and extraction of fermentable sugars, respectively. Results of the AHP pretreatment indicated that it is possible to attain up to 97% delignification and recover 88% of cellulose and hemicellulose after only 1.5 h of treatment. Regarding the saccharification process, the total sugar yield and productivity were both increased by 2-fold using an enzymatic mixture (cellulases + hemicellulases) compared to single enzyme hydrolysis (cellulases), evidencing synergism. Further evaluation of the hydrolyzates as substrate for hydrogen and methane production, resulted in yields 1.5 and 3.6-times (215.14 ± 13 L H₂ and 393.4 ± 13 L CH₄ per kg bagasse, respectively) superior to those obtained with hydrolyzates of non-pretreated bagasse processed with a single enzyme. Overall, using AHP pretreatment and subsequent hydrolysis with enzymatic mixtures improves the saccharification of A. tequilana bagasse enhancing the production of hydrogen and methane.     

Synthesis and thermal decomposition of potassium tetraamidoboranealuminate,K[Al(NH2BH3)4]

A new potassium tetraamidoboranealuminate, K[Al(NH₂BH₃)₄], has been synthesized by a mechanochemical reaction between KAlH₄ and NH₃BH₃. The compound, K[Al(NH₂BH₃)₄], crystallizes in a triclinic unit cell with space group symmetry P?1. The crystal structure consists of [K(NH₂BH₃)₆]^5? octahedra which facilitate the bridging between K⁺ in 1D chains, while also bridging K⁺ to Al³⁺ to connect the 1D chains in a 3D network. Thermal analysis reveals that K[Al(NH₂BH₃)₄] decomposes in two exothermic steps at T ～ 94 and 138 °C and releases primarily hydrogen. The total gas release amounts to ～6.0 wt% H₂. The decomposition products are investigated ex situ by powder X-ray diffraction, infrared spectroscopy, and ¹¹B and ²⁷Al NMR and identified as KBH₄ and amorphous phases, possibly BN₃, N₂BH, and/or NBH₂ whereas aluminum is found in four-, five-, and six-fold coordination. Unfortunately, the decomposed sample shows no hydrogen absorption at T = 260 °C and p(H₂) = 110 bar.     

Effective components of TORDIA cognitive–behavioral therapy for adolescent depression: Preliminary findings.

In this report, we conducted a secondary analysis of the Treatment of SSRI-Resistant Depression in Adolescents (TORDIA) study to explore the impact of specific cognitive–behavioral therapy (CBT) treatment components on outcome. In TORDIA, 334 youths (ages 12 to 18 years) with major depressive disorder who had failed to respond to an adequate course of selective serotonin reuptake inhibitor (SSRI) medication were randomized to a medication switch (either to an alternative SSRI or venlafaxine) with or without 12 weeks of adjunctive CBT. Participants who had more than 9 CBT sessions were 2.5 times more likely to have adequate treatment response than those who had 9 or fewer sessions. CBT participants who received problem-solving and social skills treatment components, controlling for number of sessions and other confounding variables, were 2.3 and 2.6 times, respectively, more likely to have a positive response. These preliminary findings underscore the importance of receiving an adequate number of sessions to attain an adequate clinical response. Finally, social skills and problem solving may be active elements in CBT for adolescent depression and should be considered in treatment by those working with seriously depressed youths. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dissemination of the Coping Power program: Importance of intensity of counselor training.

This study examined an important but rarely investigated aspect of the dissemination process: the intensity of training provided to practitioners. Counselors in 57 schools were randomly assigned to 1 of 3 conditions: Coping Power–training plus feedback (CP-TF), Coping Power–basic training (CP-BT), or a comparison condition. CP-TF counselors produced reductions in children’s externalizing behavior problems and improvements in children’s social and academic skills in comparison to results for target children in both the comparison and the CP-BT conditions. Training intensity was critical for successful dissemination, although the implementation mechanism underlying this effect remains unclear, as condition effects were not significant for completion of session objectives but were significant for the quality of counselors’ engagement with children. (PsycINFO Database Record (c) 2010 APA, all rights reserved)