Performance Analysis of Multi-Channel CR Enabled IoT Network with Better Energy Harvesting

Wireless Sensor Networks (WSNs) can be termed as an auto-configured and infrastructure-less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure and motion etc. WSNs may comprise thousands of Internet of Things (IoT) devices to sense and collect data from its surrounding, process the data and take an automated and mechanized decision. On the other side the proliferation of these devices will soon cause radio spectrum shortage. So, to facilitate these networks, we integrate Cognitive Radio (CR) functionality in these networks. CR can sense the unutilized spectrum of licensed users and then use these empty bands when required. In order to keep the IoT nodes functional all time, continuous energy is required. For this reason the energy harvested techniques are preferred in IoT networks. Mainly it is preferred to harvest Radio Frequency (RF) energy in the network. In this paper a region based multi-channel architecture is proposed. In which the coverage area of primary node is divided as Energy Harvesting Region and Communication Region. The Secondary User (SU) that are the licensed user is IoT enabled with Cognitive Radio (CR) techniques so we call it CR-enabled IoT node/device and is encouraged to harvest energy by utilizing radio frequency energy. To harvest energy efficiently and to reduce the energy consumption during sensing, the concept of overlapping region is given that supports to sense multiple channels simultaneously and help the SU to find best channel for transmitting data or to harvest energy from the ideal channel. From the experimental analysis, it is proved that SU can harvest more energy in overlapping region and this architecture proves to consume less energy during data transmission as compared to single channel. We also show that channel load can be highly reduced and channel utilization is proved to be more proficient. Thus, this proves the proposed architecture cost-effective and energy-efficient.     

A Compact Dual-Port Multi-Band Rectifier Circuit for RF Energy Harvesting

This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth. It uses a combination of п–matching network (MN) at Port-1, with a parallel connection of three cell branch MN at Port-2. The proposed impedance matching network (IMN) is adopted to reduce circuit complexity, to improve circuit performance, and power conversion efficiency (PCE) of the rectifier at low input power. The fabricated rectifier prototype operates at 0.92, 1.82, 2.1, 2.46 and 2.65 GHz covering GSM/900, GSM/1800, UMTS2100, and Wi-Fi/2.45–LTE2600. The size of the compact rectifier on the PCB board is 0.13λ_g × 0.1λ_g. The fabricated rectifier achieved an RF-to DC (radio frequency direct current) PCE of 31.8%, 24%, 22.7%, and 15%, and 14.1% for −20 dBm at the five respective measured operating frequencies. The circuit attains a peak RF-to-DC PCE of 82.3% for an input power of 3 dBm at 0.92 GHz. The proposed rectifier realizes an ambient output dc voltage of 454 mV for multi-tone input signals from the two ports. The rectifier drives a bq25504-674 power management module (PMM) to achieve 1.21 V from the two-port connection. The rectifier has the ability to exploit both frequency domain through the multi-band operation with good impedance bandwidth and a spatial domain using dual-port configuration. Hence, it is a potential candidate for various applications in radio frequency energy harvesting (RFEH) system.     

Valuing Metal–Organic Frameworks for Postcombustion Carbon Capture: A Benchmark Study for Evaluating Physical Adsorbents

The development of practical solutions for the energy‐efficient capture of carbon dioxide is of prime importance and continues to attract intensive research interest. Conceivably, the implementation of adsorption‐based processes using different cycling modes, e.g., pressure‐swing adsorption or temperature‐swing adsorption, offers great prospects to address this challenge. Practically, the successful deployment of practical adsorption‐based technologies depends on the development of made‐to‐order adsorbents expressing mutually two compulsory requisites: i) high selectivity/affinity for CO₂ and ii) excellent chemical stability in the presence of impurities. This study presents a new comprehensive experimental protocol apposite for assessing the prospects of a given physical adsorbent for carbon capture under flue gas stream conditions. The protocol permits: i) the baseline performance of commercial adsorbents such as zeolite 13X, activated carbon versus liquid amine scrubbing to be ascertained, and ii) a standardized evaluation of the best reported metal–organic framework (MOF) materials for carbon dioxide capture from flue gas to be undertaken. This extensive study corroborates the exceptional CO₂ capture performance of the recently isolated second‐generation fluorinated MOF material, NbOFFIVE ‐1‐Ni, concomitant with an impressive chemical stability and a low energy for regeneration. Essentially, the NbOFFIVE ‐1‐Ni adsorbent presents the best compromise by satisfying all the required metrics for efficient CO₂ scrubbing.     

Static output tracking control for non-linear polynomial time-delay systems via block-pulse functions

In this paper, a new method is introduced to design static output tracking controllers for a class of non-linear polynomial time-delay systems. The proposed technique is based on the projection of the controlled system and the associated linear reference model that it should follow over a basis of block-pulse functions. The useful properties of these orthogonal functions such as operational matrices jointly used with the Kronecker tensor product may transform the non-linear delay differential equations into linear algebraic equations depending only on parameters of the feedback regulator. The least-squares method is then used for determination of the unknown parameters. Sufficient conditions for the practical stability of the closed-loop system are derived, and a domain of attraction is estimated. The implementation of the proposed method is illustrated on a double inverted pendulums benchmark as well as a two-degree-of- freedom mass-spring-damper system. The simulation results show the effectiveness of the developed technique.     

Effects of indented interframe cross talk in charge-coupled device detection of discrete displays

By considering CCD detection as a spatiotemporal sampling process and considering electronically addressed liquid-crystal display's (LCD's) and cathode ray tube (CRT) display's as discrete displays, we investigate the frame-grabbing process for CCD detection of discrete displays by using CRT-CCD and LCD-CCD models. Because of the nature of the timing for pixel addressing in the CRT, line addressing in the LCD, and frame transfer in the CCD, it is found that CCD frames suffer from indented interframe cross talk of the displayed input frames. This indented cross talk occurs regardless of whether a synchronizing signal is utilized. Cross talk typically takes place between two or three input frames. Indented interframe cross talk does not affect CCD detection for frame refreshing. However, cross talk increases as the interframe difference between successive displayed input frames increases.     

Lead exposure from the use of Lawsonia inermis (henna) in temporary paint-on-tattooing and hair dying

This study reports the evaluation of a number of spectroscopic techniques used in identifying and quantifying the presence of lead in twelve commercial and traditional henna samples. The lead levels found in henna were low with concentrations ranging from 2.29 ppm to 65.98 ppm. Henna is used as a traditional cosmetic and remedy in the Middle East, Far East, and North Africa. The very low concentrations of lead measured in these henna samples were reassuring; however, the cumulative effects of prolonged lead exposure may be of concern. Thus, the use of henna especially among children may constitute a public health risk.     

Synthesis and Activity of Heterogeneous Pd/Al2O3 and Pd/ZnO Catalysts Prepared from Colloidal Palladium Nanoparticles

Heterogeneous catalysts composed of Pd nanoparticles on zinc oxide (ZnO) and aluminum oxide (Al₂O₃, alumina) were synthesized and tested for catalytic activity. Palladium nanoparticles were synthesized via solution-precipitation methods and deposited on aluminum oxide and zinc oxide supports. The particles were synthesized by decomposing a palladium precursor (Pd(Mes)₂) in a solution of trioctylphosphine [TOP route] or palladium acetate (Pd(OAc)₂) in a solution of octylamine [amine route] at 300 °C. The particles were washed and suspended in hexane, whereupon they were deposited on an oxide powder. Supported nanoparticle powders were subjected to CO oxidation tests to determine catalytic activity. Particle sizes ranged from 2.4 ± 0.4 nm average diameter when prepared using trioctylphosphine to 4 ± 1 nm using the amine route. No significant size change was observed after removal of the surfactant and catalytic testing by CO oxidation. The highest conversion of CO to CO₂ occurred with a calcined sample, indicating that the removal of surfactant increases activity.