Cimaterol and clenbuterol residue analysis by HPLC-HPTLC in liver.

A method has been developed for the analysis of cimaterol and clenbuterol residues in liver, with detection limits of 0.25 micrograms/kg and 0.5 micrograms/kg, respectively. The recovery varied from 55% to 60%. After extraction, a clean-up procedure with Baker-spe C-18 columns was performed. The two chemical compounds of interest were eluted with methanol. Cimaterol and clenbuterol were quantitatively determined by high-performance liquid chromatography (HPLC) using an RP-Select B (5 microns) column and a post-column reaction procedure. The positive results were confirmed by high-performance thin-layer chromatography (HPTLC) as this technique reaches the same level of sensitivity as the HPLC method.     

Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge

Surface recombination velocities as low as 10 cm/s have been obtained by treated atomic layer deposition (ALD) of Al₂O₃ layers on p-type CZ silicon wafers. Low surface recombination is achieved by means of field induced surface passivation due to a high density of negative charges stored at the interface. In comparison to a diffused back surface field, an external field source allows for higher band bending, that is, a better performance. While this process yields state of the art results, it is not suited for large-scale production. Preliminary results on an industrially viable, alternative process based on a pseudo-binary system containing Al₂O₃ are presented, too. With this process, surface recombination velocities of 500–1000 cm/s have been attained on mc-Si wafers.     

Comments on “Multiphase systolic algorithms for spectraldecomposition” [and reply]

Comments that the paper by Liu and Yao (see ibid., vol.40, no.1, p.190, 1992) presented an efficient algorithm for spectral decomposition, but the parallel algorithm and architecture for the Hessenberg reduction has a problem. The matrix obtained from the unitary similarity transformation is not necessarily a Hessenberg matrix. The authors reply that the Hessenberg reduction described is not in the Hessenberg form. Only the first column is in its proper form. There are many ways to overcome such a problem. One simple way is to use the multiphase rectangular systolic array     

Comparison of demineralized allogeneic bone matrix grafting (the Urist procedure) and the Ilizarov procedure in large diaphyseal defects in sheep

The bone inductive capability of the Urist and Ilizarov procedures was compared in the repair of large diaphyseal defects in sheep. In 30 animals, a 4 cm segmental defect was created in the middle portion of the right femur and was stabilized with an external fixator. The sheep were divided into four groups according to the type of reconstruction of the defect. In group 1, a demineralized allogeneic bone matrix (DABM) cylinder was used; in group 2, DABM chips; and in group 3, gradual transport of a piece of bone detached from the proximal femoral fragment was used to fill the defect. Group 4 served as a control (the defect was left empty). New bone formation was assessed by serial radiographs until the time of death at 2 or 4 months. Postmortem specimens were analyzed with respect to bone mineral content, uptake of isotopes (45Ca and 3H-proline), and histology. The first signs of new bone formation were radiographically evident at 4 weeks. In the two groups in which reconstruction involved DABM (Urist procedures), new bone failed to form in eight of the 13 animals. Full bridging of the defect was observed at 8 weeks in one animal with a DABM cylinder and two with DABM chips. No decisive difference in bone yield could be demonstrated between the two Urist procedures. In the group treated with the Ilizarov procedure, new bone formation consistently occurred at a high rate; full bridging of the defect was observed in seven of the eight animals. Bone mineral scanning and histologic analysis essentially confirmed the radiographic results. Uptake of isotopes was selectively analyzed in two sheep from each experimental group in which new bone formation was exhibited in the defect; new bone formation was increased compared with that in the contralateral femur but was equal among the three experimental groups. Our study shows that gradual transport of a detached piece of autogeneic bone (Ilizarov procedure) is more effective than implantation of DABM (Urist procedure) in eliciting new bone formation in large diaphyseal defects in sheep. The variable bone induction by DABM may be explained by differences in host immune responses to the implants.     

Magnetic resonance findings in skeletal muscle tears

Magnetic resonance (MR) images of skeletal muscle tears can clearly delineate the severity of muscle injury. Although MR imaging is seldom necessary in patients with acute muscle trauma, it can be helpful in deciding on clinical management. The two major MR findings in acute muscle tears are deformity of the muscle and the presence of abnormal signal reflecting hemorrhage and edema. In acute tears, methemoglobin within the extravascular blood causes high-signal areas on both T1- and T2-weighted images. With partial tears, the blood may dissect in a distinctive linear pattern along the muscle bundles and fibers. As healing begins, the muscle signal diminishes, first on the T1-weighted images and then on the T2-weighted images. When there is residual abnormal signal on images obtained more than several months after the injury, it is presumed to represent hemorrhage from recurrent tears. In patients with a questionable history of a remote injury, the clinical presentation may be that of persistent pain or a soft tissue mass. In these cases MR imaging may identify the cause of the pain and can exclude a neoplasm by proving that the mass is a hypertrophied or retracted muscle. Thus, MR imaging has a limited, but occasionally important role in selected patients with skeletal muscle tears.     

Electronic gate detection for cell or particle counting and sizing in liquids: front-end characteristics, flow-dependent gate impedance, and its remediation

The detection sensitivity and the sizing resolution of electronic gating are inherently limited by fluctuating gate impedance and flow-induced noise. Instabilities of this type, as shown, are due to varying flow patterns of the carrier liquid beyond the gate. Their effects, although largely hidden in dc-operated gating, cause broadening and shift of cell/particle-size distributions under measurement. RF-operated gating, more specifically the demodulation operation, is much more hindered. For an investigation of these effects, a physical model is proposed along with a procedure for the identification of the system parameters. A detector of dedicated concept is used for evaluating the model, and, more specifically, for investigating the impact of configurational and hydrodynamic parameters. Experiments prove that the origin of flow-dependent gate impedance is to be located inside a zone of only a few-micrometer extent at the gate outlet. This is confirmed by the calculated electric field patterns. On such grounds, electrode configurations are proposed that minimize the current density in the zone of hydrodynamic instability and, hence, the flow-induced noise. The same configurations also minimize the impedance of the gate as signal source, facilitating broadband operation, and multifrequency cell impedance measurements.     

Simulation of runoff and phosphorus transport in a Carpathian catchment,Slovakia

A comprehensive, GIS‐based modelling approach is developed to estimate runoff and phosphorus transport within a watershed at a daily time step. The approach relies on the use of GIS data for deriving major critical model parameters that exhibit distinct spatial variability over the catchment. Surface runoff is calculated by a modified rational method, which depends upon rainfall intensity, soil moisture status, slope, land‐use and soil characteristics. Phosphorus loading is estimated as a function of the runoff volume and the event mean concentration for different land use categories. A diffusive approximation method is used to trace runoff and phosphorus transport to the basin outlet. The modelling approach is tested in the Margecany catchment, Hornad River basin, Slovakia, to simulate runoff, phosphorus loading, and its transport on a daily time scale using data observed between 1995 and 2000. Satisfactory results of the hydrographs and phosphorus concentration at the basin outlet are obtained, though more efforts regarding the phosphorus cycling and its biochemical reactions need to be clarified by further research. Copyright © 2006 John Wiley & Sons, Ltd.