Effect of NiO-to-Ni Transformation on Conductivity and Structure of Yttria-Stabilized ZrO2

The conductivity and structure of 8-mol%-yttria-stabilized zirconia with additions of nickel oxide has been investigated, both in the as-prepared state and after reduction of NiO in hydrogen. During reduction at 1000°C, the conductivity decreases by 40%–50% and most of the NiO dissolved in the zirconia is exsolved in the form of nickel particles. This is accompanied by the formation of tetragonal zirconia precipitates of size 10–40 nm and by an increase in the lattice parameter. On reoxidation in air at 1000°C, the change in lattice parameter is partly reversed, but the conductivity shows no further changes.     

Chloride binding isotherm from migration and diffusion tests

Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride binding isotherm. Compared to other methods, chloride binding isotherms obtained directly from nonsteady-state diffusion tests seem closer to the reality. We studied the chloride binding isotherm from both nonsteady-state electrical-accelerated migration and diffusion tests at different temperatures. Twelve concrete mixes with different supplementary cementing materials and water-to-binder ratios of 0.35, 0.48 and 0.6 were cast for study. The specimens after diffusion (or migration) tests were sliced layer by layer, and acid-soluble and free chloride contents of each layer were measured. A chloride binding isotherm was obtained from one specimen. Experimental results indicated that electrical voltage had a slight effect on the chloride binding isotherm of concrete. Temperature had a positive effect on chloride binding. The higher the water-to-binder ratio was, the higher the chloride binding was.     

A new enzymatically produced 1-lactulose: A pilot study to test the bifidogenic effects

In a novel pilot plant scale process, lactulose was synthesized enzymatically, operating a maximum batch volume of 170 L. The test product was subjected to a randomized, double-blind, placebo-controlled pilot feeding study. Participants consumed a milk serum drink for 14 days, equalling a daily intake of about 3 g d⁻¹ galactosyl-fructoses. Additionally, the effect of industrially produced lactulose and a placebo drink without lactulose was determined. So far, clinical studies on the prebiotic action of lactulose only focussed on the effects of industrially generated lactulose. The intake of enzymatically synthesized lactulose significantly increased (p = 0.001) faecal bifidobacterial counts, while there was no difference with industrially produced lactulose. Analysis of the compounds showed that the drink with enzymatically synthesized lactulose contained an additional disaccharide, β-1,1-galactosyl-fructose. Presumably, this sugar has a bifidogenic effect and may represent a novel prebiotic.     

Full Film, Boundary Lubrication and Tribochemistry in Steel Circular Contacts Lubricated with Glycerol

In this article, the lubricating properties of pure glycerol are investigated under both mild and severe EHL regimes. Amazingly low friction coefficients (about 0.01) are reported by experiments in thick film regimes compared to traditional base oils. EHL calculations of film thickness and friction (including thermal effects) predict friction coefficients that are twice those actually found for glycerol. Chemical analysis of glycerol before and after the friction tests were performed by NMR and Karl Fischer methods, and they reveal that water is produced by tribochemical reaction as well as other species like aldehydes. This finding is in agreement with a corrosion pattern observed inside the wear scars of the steel samples. This study provides an explanation to the anomalously low friction observed in the thick film regime. In fact, water produced in the lubricant decreases traction forces due to the drastic decrease of the viscosity of glycerol with water addition.     

Passive protections against breakdowns between accelerating grids in SPIDER experiment

In the SPIDER experiment a ITER-like full size plasma source will be realized with the target to extract a Dˉ beam of 70 A and then to accelerate it to 100 keV energy. The reduction of the effects due to the frequent breakdowns between the accelerating grids is needed, because of grids damage due to energy deposition by arcing and strong electromagnetic noise (EMI) emission. The solution proposed is a comprehensive design of the circuit. Two passive components are installed: a Damping Resistor and an Output Filter in series to the Power Supplies. Then a doubled screened structure will be adopted for the 30 m long – 100 kV Transmission Line TL, which connects the Ion Source and Acceleration Power Supplies to their loads: the Inner Screen will be connected to the reference ground (the vessel) by a resistive link, the Outer Screen acting as a low-impedance ground. Finally, a Distributed Core Snubber DCS (magnetic snubber) will be installed onto the TL, aimed to increase the damping of the oscillations due to the stray inductances and capacitances. The DCS is composed of 10 magnetic alloy cores and is equipped by a biasing circuit to enhance the flux swing in unsaturated condition during the breakdown. A detailed model of the circuit is developed to evaluate the passive components parameters for protection against breakdown, in which all the magnetic and capacitive couplings between components are modeled as well as the magnetic core snubber saturation.     

Silver (Ag) as anode and cathode current collectors in high temperature planar solid oxide fuel cells

Planar electrolyte supported solid oxide fuel cells were operated at 900 °C with humidified H₂ for 200 h using silver mesh and paste for cathode current collection. Continuous potentiostatic tests at 0.7 V appeared to induce migration of Ag towards electrode-electrolyte interphase, while continuous OCV tests caused no mass transport. Similar SOFCs fueled by coal syngas at 850 °C using Ag for both anode and cathode current collection indicated little, if any, Ag migration; providing the possibility of employing Ag for 100 h laboratory scale tests using coal-derived syngas. Use of high temperature steam, carbon dioxide and carbon monoxide did not result in the formation of silver carbonates.     

A novel magneto‐impedance sensor model based on the zeros of Bessel functions

Nowadays, the design of magneto‐impedance (MI) sensors requires the development of lumped circuit models that can be simulated through equivalent impedance circuits relied on Bessel functions. A new impedance model based on Senani's equivalent using the zeros of Bessel functions is developed in this paper. The model allows to describe the impedance as a transfer function that can be easily synthesized by means of current conveyor circuits and passive elements. The mathematical representation was verified under simulation of transfer functions involving different number of poles and zeros. Moreover, the model has been verified using SPICE simulations and measurement results from a fabricated prototype demonstrating its scope and validity. Finally, a study of finite tracking errors of CCIIs used in the implementation of magneto‐impedance sensor has been realized. Copyright © 2014 John Wiley & Sons, Ltd.     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.