Fabrication of a poly-Si thin-film transistor with storage capacitor

The fabrication process of a low-temperature poly-Si thin-film transistor (TFT) with a storage capacitor was studied. The atmospheric-pressure chemical-vapour deposited SiO₂ protected the buried indium tin oxide (ITO) from reduction by a pure H₂ plasma treatment that was essential for the effective improvement of the poly-Si TFT characteristics. Thus, a storage capacitor with an ITO (picture electrode)-SiO₂-ITO (buried common electrode) structure was successfully fabricated. The poly-Si TFT with a channel width/length W/L ratio of 5 drove a 3 pF storage capacitor in 2 μs, and it showed superior driverability for LCD use. The TFT also had good hold characteristics under illumination for the realization of grey-scale representation.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

Detection of hepatitis C virus RNA from the heart of patients with hypertrophic cardiomyopathy

We investigated hepatitis C virus (HCV) infection in 35 patients with hypertrophic cardiomyopathy and 40 patients with ischemic heart disease who were consecutively admitted to our hospital. Frequency of positive anti-HCV antibody was significantly higher in patients with hypertrophic cardiomyopathy (6 of 35 patients, 17.1%) than that in patients with ischemic heart disease (1 of 40 patients, 2.5%, p = 0.036). In three of these six patients with hypertrophic cardiomyopathy, HCV RNA was detected in myocardial tissue. In two of these three patients, HCV RNA was detected from biopsy and autopsy specimens of the ventricles, but not in the serum, suggesting that HCV may replicate in myocardial tissue and may be relevant to ventricular hypertrophy. Thus, HCV infection may play a role in the development of hypertrophic cardiomyopathy.     

Numerical analyses of high‐beta spherical tokamaks with varied elongation

The effect of plasma elongation on the second‐stable spherical tokamak (ST) was numerically studied using the experimentally measured pressure and current profiles of ultrahigh‐beta STs. The maximum beta of ST over 50% was obtained in the TS‐3 ST/CT experiment by applying an external toroidal field to an FRC. It was found that the marginal beta for the ballooning instability increased with the plasma elongation κ of ST. The elongated STs with κ > 2 have the magnetic shear (S)–pressure gradient (α) profiles located in the second‐stable regime for the ballooning mode and the stability margin increased with κ. The close relation between the absolute minimum‐B profile and the second stability was documented. The effect of elongation on maximum beta was observed to saturate when κ exceed 3, indicating that the optimized elongation for high‐beta STs is located around 2 < κ < 3. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 1–6, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20132     

Drain structure optimization for highly reliable deep submicrometern-channel MOSFET

A guideline for n^- fully gate overlapped (FOLD) structure design optimization has been studied. From the viewpoint of reliability, the greatest reduction in substrate current directly leads to the most reliable n^- design for the FOLD structure. The current path modulation phenomenon due to the trapped charge at the n ^- extension region dominates the hot-carrier induced characteristics change for conventional lightly doped drain (LDD) structure with side-wall spacer. This phenomenon is minimized in the FOLD structure due to its higher controllability of the gate electrode than the LDD structure at the n^- extension region. Furthermore, it was also confirmed that the 0.3 μm optimized FOLD structure can achieve high circuit performance at 3.3 V operation, maintaining hot-carrier resistance     

Synthesis and applications of fluoroalkyl end-capped cooligomers having fullerene and mixed fullerenes in the main chain

Fluoroalkanoyl peroxides reacted with FULLERENES [fullerene (C₆₀) and commercially available fullerenes (Nanom Mix^TR and Nanom Black^TR)] and radical polymerizable comonomers such as acrylic acid, N,N-dimethylacrylamide, N-(1,1-dimethyl-3-oxobutyl)acrylamide, and acryloylmorpholine to afford fluoroalkyl end-capped cooligomers having FULLERENES in the main chain under very mild conditions. Fluoroalkyl end-capped Nanom Mix and Nanom Black cooligomers thus obtained were found to exhibit a similar solubility to that of the corresponding fluoroalkyl end-capped cooligomers having fullerene in the main chain. These fluorinated FULLERENES cooligomers were found to form the nanometer size-controlled self-assembled cooligomeric aggregates in aqueous solutions. These fluoroalkyl end-capped FULLERENES cooligomers were more effective for solubilizing fullerene, Nanom Mix and Nanom Black into water, compared to those of the corresponding fluoroalkyl end-capped homooligomers having no FULLERENES in the main chain. Fluoroalkyl end-capped fullerene- and Nanom Mix-acrylic acid cooligomers were found to exhibit fluorescence spectra related to fullerene and Nanom Mix in cooligomers, respectively, in aqueous solutions. Additionally, these fluorinated fullerene- and Nanom Mix-acrylic acid cooligomers were able to increase chemiluminescence intensity related to luminol, effectively, compared to the corresponding fluorinated acrylic acid homooligomers.