Recycling of multilayer packaging using a reversible cross-linking adhesive

Plastic-based multilayer packaging has an important function on the packaging market, but is currently not recyclable as the polymer layers used are usually thermodynamically immiscible. This work therefore follows the approach to prepare separable multilayer packaging using a packaging adhesive modified with thermally unstable adducts, and proposes a corresponding recycling process. For this purpose, typical multilayer structures (polyethylene (PE)// polyethylene terephtalate (PET), PET//aluminum, and PE//aluminum) were prepared by curing furan-/maleimide-functionalized polyurethane (PU)-prepolymers with a three-functional cross-linking agent. Adhesions of up to over 3N per 15 mm test specimen were measured or substrate failures of PET films were observed. However, heating in dimethylsulfoxide, the retro-Diels–Alder reaction takes place and the cross-linked adhesive turns thermoplastic and dissolves in the solvent. Thus, the laminate separates and the pure PE, PET, and aluminum foils can be recovered without any PU residue.     

Phase separation of a hafnium alkoxide-modified polysilazane upon polymer-to-ceramic transformation—A case study

The polymer-to-ceramic transformation of a hafnium alkoxide-modified polysilazane was investigated via thermogravimetric analysis coupled with in situ mass spectrometry (TG/MS), nuclear magnetic resonance (MAS NMR) and transmission electron microscopy (TEM). The results indicate that the structural evolution of the polysilazane upon ceramization is strongly affected by the modification with hafnium alkoxide. Thus, the content of carbon in the ceramic backbone was relatively low, whereas a large amount of SiN₄ sites and a segregated carbon phase was present in the sample. Furthermore, this study revealed the formation of a SiHfCNO amorphous single phase ceramic via pyrolysis of the polymer at 700 °C, whereas at higher pyrolysis temperatures precipitation of hafnia was observed, leading to an amorphous hafnia/silicon carbonitride ceramic nanocomposite. The precipitation of hafnia was shown to not rely on decomposition processes, but to be a result of rearrangement reactions occurring within the ceramic material.     

STD‐NMR‐Based Protein Engineering of the Unique Arylpropionate‐Racemase AMDase G74C

Structure‐guided protein engineering achieved a variant of the unique racemase AMDase G74C, with 40‐fold increased activity in the racemisation of several arylaliphatic carboxylic acids. Substrate binding during catalysis was investigated by saturation‐transfer‐difference NMR (STD‐NMR) spectroscopy. All atoms of the substrate showed interactions with the enzyme. STD‐NMR measurements revealed distinct nuclear Overhauser effects in experiments with and without molecular conversion. The spectroscopic analysis led to the identification of several amino acid residues whose substitutions increased the activity of G74C. Single amino acid exchanges increased the activity moderately; structure‐guided saturation mutagenesis yielded a quadruple mutant with a 40 times higher reaction rate. This study presents STD‐NMR as versatile tool for the analysis of enzyme–substrate interactions in catalytically competent systems and for the guidance of protein engineering.     

Aryl Bis‐Sulfonamide Inhibitors of IspF from Arabidopsis thaliana and Plasmodium falciparum

2‐Methylerythritol 2,4‐cyclodiphosphate synthase (IspF) is an essential enzyme for the biosynthesis of isoprenoid precursors in plants and many human pathogens. The protein is an attractive target for the development of anti‐infectives and herbicides. Using a photometric assay, a screen of 40 000 compounds on IspF from Arabidopsis thaliana afforded symmetrical aryl bis‐sulfonamides that inhibit IspF from A. thaliana (AtIspF) and Plasmodium falciparum (PfIspF) with IC₅₀ values in the micromolar range. The ortho‐bis‐sulfonamide structural motif is essential for inhibitory activity. The best derivatives obtained by parallel synthesis showed IC₅₀ values of 1.4 μm against PfIspF and 240 nm against AtIspF. Substantial herbicidal activity was observed at a dose of 2 kg ha^?1. Molecular modeling studies served as the basis for an in silico search targeted at the discovery of novel, non‐symmetrical sulfonamide IspF inhibitors. The designed compounds were found to exhibit inhibitory activities in the double‐digit micromolar IC₅₀ range.     

Reinforcement of a Magnesium‐Ammonium‐Phosphate Cement with Calcium Phosphate Whiskers

Self‐setting resorbable phosphate cements are characterized by an excellent biocompatibility and bioactivity. However, poor mechanical properties restrict their application. Most studies which characterize phosphate cements mechanically focus on strength measurements. Examinations of mechanical reliability and facture toughness were hardly performed. In this study, calcium phosphate whisker‐reinforced magnesium‐ammonium‐phosphate (struvite) cements were examined at the whisker–matrix interface and the measured strength, reliability and toughness values were correlated to these observations. Moreover, the toughening mechanisms were evaluated. It was shown that whisker incorporation is not beneficial for material strength. It led to a strength decrease from 29.8 to 21.8 MPa by the incorporation of 15 vol% calcium‐deficient hydroxyapatite (CDHA) whiskers compared to the pure struvite cement. Weibull statistics and microstructural observations revealed that this is caused by the whisker–matrix interface, which acts as a flaw. In contrast with that, the reliability increases upon whisker incorporation. Furthermore, the critical stress intensity factor K_IC as well as the work‐of‐fracture γ_wof increase from 0.52 to 0.60 MPam^1/2 and from 9.5 to 12.9 J/m² by the addition of 15 vol% CDHA whiskers compared to the original struvite cement. It was shown that whisker pull‐out and crack deflection are the main mechanisms responsible for this increase.     

Strong and super tough: Layered ceramic‐polymer composites with bio‐inspired morphology

Bio‐inspired layered ceramic‐polymer composites with high strength and toughness were prepared from sintered aluminum oxide ceramic sheets and cationically curing epoxy resins toughened with poly(ε‐caprolactone) (PCL). The architecture of the composite is inspired by nacre but is arranged on a larger scale. Ceramic sheets with a nominal thickness of 250 μm were assembled into composite plates by adhesive layers with a nominal thickness of 20 μm. Before the manufacturing of the composites, the stress‐strain properties of the polymer component were tailored by the variation in the PCL content between 0 and 39 wt%. For composites with 4 and 15 ceramic layers, the bending strengths achieved 327 MPa and 376 MPa, which are higher than that of pure ceramic sheets. Moreover, composites with 15 ceramic layers show a 16 times higher toughness compared to that of the pure ceramic sheets. The results indicate that the toughness of the layered composites increases significantly with the number of layers. Inspired by the geometrical ratio of the natural sheet composite nacre, we have achieved a similar strength but a 2 times higher toughness than nacre by only adding up to 6 vol% of the polymer.     

Large‐Scale Preparation of Polymer Nanocarriers by High‐Pressure Microfluidization

Polymer nanocarriers are used as transport modules in the design of the next generation of drug delivery technology. However, the applicability of nanocarrier‐based technology depends strongly on our ability to precisely control and reproduce their synthesis on a large scale because their properties and performances are strongly dependent on their size and shape. Fundamental studies and practical applications of polymer nanocarriers are hampered by the difficulty of using the current methods to produce monodispersed nanocarriers in large quantities and with high reproducibility. Here, a versatile and scalable approach is reported for the large‐scale synthesis of polymer nanocarriers from water‐in‐oil miniemulsions. This method uses microfluidization to perform a controlled emulsification and is proven to be effective to prepare nanocarriers of different biopolymers (polysaccharides, lignin, proteins) up to 43 g min^?1 with reproducible size and distribution.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Cloning and heterologous expression of three type II PKS gene clusters from Streptomyces bottropensis

Mensacarcin is a potent cytotoxic agent isolated from Streptomyces bottropensis. It possesses a high content of oxygen atoms and two epoxide groups, and shows cytostatic and cytotoxic activity comparable to that of doxorubicin, a widely used drug for antitumor therapy. Another natural compound, rishirilide A, was also isolated from the fermentation broth of S. bottropensis. Screening a cosmid library of S. bottropensis with minimal PKS-gene-specific primers revealed the presence of three different type II polyketide synthase (PKS) gene clusters in this strain: the msn cluster (mensacarcin biosynthesis), the rsl cluster (rishirilide biosynthesis), and the mec cluster (putative spore pigment biosynthesis). Interestingly, luciferase-like oxygenases, which are very rare in Streptomyces species, are enriched in both the msn cluster and the rsl cluster. Three cosmids, cos2 (containing the major part of the msn cluster), cos3 (harboring the mec cluster), and cos4 (spanning probably the whole rsl cluster) were introduced into the general heterologous host Streptomyces albus by intergeneric conjugation. Expression of cos2 and cos4 in S. albus led to the production of didesmethylmensacarcin (DDMM, a precursor of mensacarcin) and the production of rishirilide A and B (a precursor of rishirilide A), respectively. However, no product was detected from the expression of cos3. In addition, based on the results of isotope-feeding experiments in S. bottropensis, a putative biosynthesis pathway for mensacarcin is proposed.