Association of cerebral palsy with epilepsy

Fifty patients of various types of cerebral palsy were studied to find out an association between cerebral palsy, EEG abnormalities and development quotient. Seventy-six per cent patients had spastic cerebral palsy. Hypotonic cerebral palsy was the next common type (14%). Athetosis and ataxic forms were found to be rare (2% each). Epilepsy was associated with 56% patients. Clinical types of seizures observed were: Generalised tonic-clonic (43%), myoclonic (17.9%), generalised tonic (10.7%), partial simple (10.7%) and partial complex (17.9%). The incidence of seizures was highest in hypotonic type in which 85.7% had epilepsy. Mean developmental quotient of cerebral palsy patients was 34.9% with maximum retardation in hypotonic cerebral palsy (25.14%). Sixty per cent of patients had abnormal EEG, out of these hypotonic patients had maximum (70%) chances of EEG abnormality followed by spastic patients (55%). Developmental retardation was more severe statistically in the patients with abnormal EEG than normal EEG.     

Enhanced near-infrared to green upconversion from Er3+-doped oxyfluoride glass and glass ceramics containing BaGdF5 nanocrystals

In this work, effect of glass composition as well as ceramization on visible and near-infrared (NIR) luminescence properties along with their decay dynamics of Er³⁺ ions has been compared considering two different oxyfluoride glasses yielding BaF₂ and BaGdF₅ nanocrystals. Both the glass systems have exhibited an intense normal and upconversion green emission under ultraviolet (378 nm) and NIR (978 nm) excitations, respectively. A remarkable enhancement of these emission intensities is observed for gadolinium-(Gd) containing glasses. Interestingly, NIR fluorescence intensity from Er³⁺ ions at 1540 nm has showed marginal decrease in gadolinium-containing glass which is attributed to occurrence of strong excited-state absorption (ESA) due to higher fluorine content ensuing an augmentation of upconversion green emission with a concomitant decrease in NIR emission. The quadratic dependence of upconversion green emission intensity on its pump power for all the samples revealed biphotonic absorption process from ground-state ⁴I_15/2 to the excited-state ⁴I_11/2 followed by ESA of second photon to the ⁴F_7/2 level. The intense green upconversion emission as well as enhanced NIR fluorescence lifetimes indicate the suitability of these glass/glass ceramics for upconversion lasers and amplification in the third telecom window.     

Finite element simulations of notch tip fields in magnesium single crystals

Recent experiments using three point bend specimens of Mg single crystals have revealed that tensile twins of \(\{10\bar{1}2\}\) -type form profusely near a notch tip and enhance the fracture toughness through large plastic dissipation. In this work, 3D finite element simulations of these experiments are carried out using a crystal plasticity framework which includes slip and twinning to gain insights on the mechanics of fracture. The predicted load–displacement curves, slip and tensile twinning activities from finite element analysis corroborate well with the experimental observations. The numerical results are used to explore the 3D nature of the crack tip stress, plastic slip and twin volume fraction distributions near the notch root. The occurrence of tensile twinning is rationalized from the variation of normal stress ahead of the notch tip. Further, deflection of the crack path at twin–twin intersections observed in the experiments is examined from an energy standpoint by modeling discrete twins close to the notch root.     

Exergy analysis of the active solar distillation systems integrated with solar ponds

Active solar distillation system integrated with solar pond is the green energy system for desalination without negative environmental impact. This clean technology has potential to contribute a lot to water security, sustainable development, and world stability. In this article, results of the energy as well as exergy analysis performed on this novel system integrated with solar pond are presented. This theoretical analysis is carried out in the climatic conditions of New Delhi (India) during a typical summer day. The model and procedures can be helpful in the design, and performance investigation of the actual system anywhere in the world. The daily productivity, energy, and exergy efficiency of the passive solar still are found to be 5 L/m², 38.63 %, and 2.71 %, respectively, corresponding to a sum total of 24.436 MJ/m² day solar energy input in passive mode. With the integration of solar pond in the active solar still, the daily productivity, energy, and exergy efficiency rises to about 9.5 L/m², 46 %, and 14.81 % respectively, for thermal energy input from 100 to 500 W/m² during off-sunshine hours. The further improvement in the performance of the same system is observed if the thermal energy is supplied continuously (24 h) to the solar still in addition to incident solar radiation. The proposed system will meet the demand of freshwater in both rural and urban areas and help in reducing the load of CO₂ emission on the environment, saving high grade energy consumed for desalination through conventional devices and technologies.     

An accurate model for dynamic crosstalk analysis of CMOS gate driven on-chip interconnects using FDTD method

An accurate and time efficient model of CMOS gate driven coupled-multiple interconnects is presented in this paper for crosstalk induced propagation delay and peak voltage measurements. The proposed model is developed using the finite difference time domain (FDTD) technique for coupled RLC interconnects, whereas the alpha power law model is used to represent the transistors in a CMOS driver. As verified by the HSPICE simulation results, the transient response of the proposed model demonstrates high accuracy. Over the random number of test cases, crosstalk induced peak voltage and propagation delay show average errors of 1.1% and 4.3%, respectively, with respect to HSPICE results.     

Passive solar heating of a non-airconditioned building with movable insulation over the roof pond

This paper presents a simple mathematical model for solar space heating in a non-airconditioned building with movable insulation over the roof pond. The building room considered is of rectangular shape (6 m × 5 m × 4 m) based on the ground. The effects of heat conduction to the ground, heat transfers to furnishings and heat losses due to air ventilation/infiltration have been taken into account in the general heat transfer analysis. The day-to-night change of insulation over the roof pond has been represented by a rectangular step function variation of the heat transfer coefficient at the pond's surface. An increase of 3 to 4°C in the room air temperature is achieved by means of movable insulation over the roof pond on a mild winter's day (17th February, 1982) in New Delhi.     

Simulation model for sizing of stand-alone solar PV system with interconnected array

Solar PV arrays made of interconnected modules are comparatively less susceptible to shadow problem and power degradation resulting from the aging of solar cells. This paper presents a simulation model for the sizing of stand-alone solar PV systems with interconnected arrays. It considers the electricity generation in the array and its storage in the battery bank serving the fluctuating load demand. The loss of power supply probability (LPSP) is used to connote the risk of not satisfying the load demand. The non-tracking (e.g., fixed and tilted) and single-axis tracking aperture arrays having cross-connected modules of single crystalline silicon solar cells in a (6×6) modular configuration are considered. The simulation results are illustrated with the help of a numerical example wherein the load demand is assumed to follow uniform probabilistic distribution. For a given load, the numbers of solar PV modules and batteries corresponding to zero values of LPSP on diurnal basis during the year round cycle of operation are presented. The results corresponding to the surplus and deficit of energy as a function of LPSP are also presented and discussed to assess the engineering design trade offs in the system components.Furthermore, a simple cost analysis has also been carried out, which indicates that for Delhi the stand-alone solar PV systems with fixed and tilted aperture arrays are better option than those with single-axis tracking aperture (with north–south oriented tracking axis) arrays.     

Multi-objective thermodynamic optimization of solar parabolic dish stirling heat engine with regenerative losses using NSGA-II and decision making

The proposed work investigates optimal values of various decision variables that simultaneously optimize power output, net-work output and second law efficiency of solar driven Stirling heat engine with regenerative heat losses, conducting thermal bridging losses using evolutionary algorithm based on NSGA-II in Matlab simulink environment. Effects of design parameters as absorber temperature, concentrating ratio, radiative and convective heat transfers are included in the analysis. Pareto frontier is obtained for triple and dual objectives and the best optimal value is selected through four different decision making techniques viz. Fuzzy, Shannon entropy, LINMAP and TOPSIS. Triple objective evolutionary approach applied to the proposed model gives power output, net-work output and second law efficiency as (38.87 kW, 1.24 kJ, 0.3156) which are 18.19, 16.78 and 31.51% lower in comparison with reversible system. With the objective of error investigation, the average and maximum error of the obtained results are figured at last.