Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Defluoridation of groundwater using brick powder as an adsorbent

Defluoridation of groundwater using brick powder as an adsorbent was studied in batch process. Different parameters of adsorption, viz. effect of pH, effect of dose and contact time were selected and optimized for the study. Feasible optimum conditions were applied to two groundwater samples of high fluoride concentration to study the suitability of adsorbent in field conditions. Comparison of adsorption by brick powder was made with adsorption by commercially available activated charcoal. In the optimum condition of pH and dose of adsorbents, the percentage defluoridation from synthetic sample, increased from 29.8 to 54.4% for brick powder and from 47.6 to 80.4% for commercially available activated charcoal with increasing the contact time starting from 15 to 120 min. Fluoride removal was found to be 48.73 and 56.4% from groundwater samples having 3.14 and 1.21 mg l(-1) fluoride, respectively, under the optimized conditions. Presence of other ions in samples did not significantly affect the deflouridation efficiency of brick powder. The optimum pH range for brick powder was found to be 6.0-8.0 and adsorption equilibrium was found to be 60 min. These conditions make it very suitable for use in drinking water treatment. Deflouridation capacity of brick powder can be explained on the basis of the chemical interaction of fluoride with the metal oxides under suitable pH conditions. The adsorption process was found to follow first order rate mechanism as well as Freundlich isotherm.     

Crosstalk analysis for a CMOS gate driven inductively and capacitively coupled interconnects

This paper deals with crosstalk analysis of a CMOS driven capacitively and inductively coupled interconnect. The Alpha Power Law model of MOS transistor is used to represent a CMOS driver. This is combined with a transmission line-based coupled RLC model of interconnect to develop a composite model for analytical purpose. On this basis a transient analysis of crosstalk noise is carried out. Comparison of the analytical results with SPICE extracted results shows that the error involved is nominal.     

Studies on dielectric relaxation and defect generation for reliability assessments in ultrathin high-k gate dielectrics on Ge

In this work, we present the results of dielectric relaxation and defect generation kinetics towards reliability assessments for Zr-based high-k gate dielectrics on p-Ge (1 0 0). Zirconium tetratert butoxide (ZTB) was used as an organometallic source for the deposition of ultra thin (∼14 nm) ZrO₂ films on p-Ge (1 0 0) substrates. It is observed that the presence of an ultra thin lossy GeO_x interfacial layer between the deposited high-k film and the substrate, results in frequency dependent capacitance-voltage (C-V) characteristics and a high interface state density (∼10¹² cm⁻² eV⁻¹). Use of nitrogen engineering to convert the lossy GeO_x interfacial layer to its oxynitride is found to improve the electrical properties. Magnetic resonance studies have been performed to study the chemical nature of electrically active defects responsible for trapping and reliability concerns in high-k/Ge systems. The effect of transient response and dielectric relaxation in nitridation processes has been investigated under high voltage pulse stressing. The stress-induced trap charge density and its spatial distribution are reported. Charge trapping/detrapping of stacked layers under dynamic current stresses was studied under different fluences (−10 mA cm⁻² to −50 mA cm⁻²). Charge trapping characteristics of MIS structures (Al/ZrO₂/GeO_x/Ge and Al/ZrO₂/GeO_xN_y/Ge) have been investigated by applying pulsed unipolar (peak value - 10 V) stress having 50% duty-cycle square voltage wave (1 Hz-10 kHz) to the gate electrode.     

Assembly of Fully Substituted 2H-Indazoles Catalyzed by Cu2O Rhombic Dodecahedra and Evaluation of Anticancer Activity

Simultaneous C−N, and N−N bond-forming methods for one-pot transformations are highly challenging in synthetic organic chemistry. In this study, the Cu₂O rhombic dodecahedra-catalyzed synthesis of 2H-indazoles is demonstrated with good to excellent yields from readily available chemicals. This one-pot procedure involves Cu₂O nanoparticle-catalyzed consecutive C−N, and N−N bond formation followed by cyclization to yield 2H-indazoles with broad substrate scope and high functional group tolerance. Various cell-based bioassay studies demonstrated that 2H-indazoles inhibit the growth of cancer cells, typically through induction of apoptosis in a dose-dependent manner. Moreover, 2H-indazoles tested in the MDA-MB-468 cell line were capable of inhibiting cancer cell migration and invasion. Thus, it is shown that 2H-indazoles have potent in vitro anticancer activity that warrant further investigation of this compound class.     

Heat transfer analysis of receiver for large aperture parabolic trough solar collector

Parabolic trough solar collector (PTSC) is one of the most proven technologies for large‐scale solar thermal power generation. Currently, the cost of power generation from PTSC is expensive as compared with conventional power generation. The capital/power generation cost can be reduced by increasing aperture sizes of the collector. However, increase in aperture of the collector leads to higher heat flux on the absorber surface and results in higher thermal gradient. Hence, the analysis of heat distribution from the absorber to heat transfer fluid (HTF) and within the absorber is essential to identify the possibilities of failure of the receiver. In this article, extensive heat transfer analysis (HTA) of the receiver is performed for various aperture diameter of a PTSC using commercially available computational fluid dynamics (CFD) software ANSYS Fluent 19.0. The numerical simulations of the receiver are performed to analyze the temperature distribution around the circumference of the absorber tube as well as along the length of tube, the rate of heat transfer from the absorber tube to the HTF, and heat losses from the receiver for various geometric and operating conditions such as collector aperture diameter, mass flow rate, heat loss coefficient (HLC), HTF, and its inlet temperature. It is observed that temperature gradient around the circumference of the absorber and heat losses from the receiver increases with collector aperture. The temperature gradient around the circumference of the absorber tube wall at 2 m length from the inlet are observed as 11, 37, 48, 74, and 129 K, respectively, for 2.5‐, 5‐, 5.77‐, 7.5‐, and 10‐m aperture diameter of PTSC at mass flow rate of 1.25 kg/s and inlet temperature of 300 K for therminol oil as HTF. To minimize the thermal gradient around the absorber circumference, HTFs with better heat transfer characteristics are explored such as molten salt, liquid sodium, and NaK78. Liquid sodium offers a significant reduction in temperature gradient as compared of other HTFs for all the aperture sizes of the collector. It is found that the temperature gradient around the circumference of the absorber tube wall at a length of 2 m is reduced to 4, 8, 10, 13, and 18 K, respectively, for the above‐mentioned mass flow rate with liquid sodium as HTF. The analyses are also performed for different HTF inlet temperature in order to study the behavior of the receiver. Based on the HTA, it is desired to have larger aperture parabolic trough collector to generate higher temperature from the solar field and reduce the capital cost. To achieve higher temperature and better performance of the receiver, HTF with good thermophysical properties may be preferable to minimize the heat losses and thermal gradient around the circumference of the absorber tube.     

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm(3) only. A compact size single capacitor (4 μF) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 × 10(4) neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our (3)He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 ± 0.27) MeV. The measured neutron pulse width is (24 ± 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.     

Rapid detection of hazardous H2O2 by biogenic copper nanoparticles synthesized using Eichhornia crassipes extract

Microsystem Technologies - Here we present a simple, clean and eco-friendly synthesis procedure of copper nanoparticles from copper sulphate solution using flower extract of Eichhornia crassipes...     

Emerging Soft Conductors for Bioelectronic Interfaces

Bidirectional interfacing between electrodes and biological systems has enabled diagnostics and therapeutics in modern medicine; however, the inherent dissimilarity between the soft, ion‐rich, dynamic biological tissues and the rigid, dry, static electronic systems hinders the establishment of effective and reliable bioelectronic interfaces. In the past decade, the scope of flexible/stretchable electronics has been broadened into bioelectronics owing to the need of implementation of various biocompatible soft conductors. Herein, the basic requirements for the construction of both epidermal and implantable bioelectronic interfaces utilizing soft materials are discussed, the most recent progress in the development of soft conductors, which are customized to interface with skin and other tissues, are summarized. An outlook into the remaining obstacles is provided and possible strategies to facilitate technological advances in bioelectronics are also outlined.