Utilization of reaction medium-dependent regiospecificity of Candida antarctica lipase (Novozym 435) for the synthesis of 1,3-dicapryloyl-2-docosahexaenoyl (or eicosapentaenoyl) glycerol

A highly efficient enzymatic method for the synthesis of regioisomerically pure 1,3-dicapryloyl-2-docosahexaenoyl glycerol (CDC) in two steps was established. 2-Monoglyceride (2-MG) formation by ethanolysis of tridocosahexaenoylglycerol (DDD) with immobilized Candida antarctica lipase (Novozym 435) as catalyst was the key step of the synthesis. CDC was finally obtained by reesterification of 2-MG with ethylcaprylate (EtC) catalyzed by Rhizomucor miehei lipase (Lipozyme IM). The regiospecificity of Novozym 435 depended on the type of reaction and the initial composition of the reaction medium. It displayed strict 1,3-regiospecificity for ethanolysis at a high excess of ethanol in the reaction mixture although it displayed no regiospecificity in transesterification and esterification reactions. The highest yield of CDC (85.4%) was obtained by ethanolysis at a 4∶1 weight ratio of ethanol/DDD for 6 h followed by reesterification at a 20∶1 molar ratio of EtC/initial DDD for 1.5 h. The regioisomeric purity of CDC was 100%. Good results were obtained also for the synthesis of 1,3-dicapryloyl-eicosapentaenoylglycerol (CEC) by the same method: 84.2% yield and 99.8% regioisomeric purity at the same reactant ratios as above. The yield of the reesterification step and the regioisomeric purity of the product were influenced by the molar ratio of the reactants for both CDC and CEC syntheses: higher excess of EtC favored higher yields and regioisomeric purity of the products.     

Microstructure and Magnetic Properties of Metastable RFeO3 (R: Rare‐earth element) Formed from Undercooled Melt

Containerless levitation technique, where the undercooling can be treated as one of the major thermodynamic parameters, was used to study the influence of oxygen partial pressure () on the microstructure and physical properties of rare‐earth orthoferrites RFeO₃ (where R = Rare‐earth element) in the ranges from 10⁵ to 10^?1 Pa. The microstructure of the as‐solidified samples changed into orthorhombic RFeO₃ (o‐RFeO₃), metastable hexagonal RFeO₃ (h‐RFeO₃), and Fe²⁺‐containing RFe₂O₄ and a new metastable R₃Fe₂O₇ phases with decreasing . The effect of on the magnetic properties was indicated as that the saturation magnetization gradually increased for R = La to Yb and decreased for R = Lu with decreasing due to the formation of metastable and magnetic phases such as Fe₃O₄ and Fe.     

Heterogeneity in Formation of Lignin. XIII. Formation of p-Hydroxyphenyl Lignin in Various Hardwoods Visualized by Microautoradiography

The heterogeneous nature of hardwood lignin was shown by visualizing the deposition process of p-hydroxyphenyl (H) lignin in the differentiating xylem of magnolia, beech, lilac and poplar. When p-glucocoumaryl alcohol-[arom. ring-2-³H], an efficient precursor of H units in lignin, was administered to the differentiating xylem of these trees, radioactivity was incorporated in the compound middle lamella region of vessel and fiber cell walls. The deposition of H units occurs only in the early stage of cell wall formation when the outer layer of the secondary wall is formed. H lignin deposits mainly within pectic substances and hemicellulose gel to form a highly condensed structural moiety.     

Fracture toughness of silica particulate‐filled epoxy composite

The relationship between the postcuring conditions and fracture toughness on three silica particulate‐filled epoxy composites was investigated. The glass transition temperature, T_g, and the fragility parameter, m, derived from the thermo‐viscoelasticity, were used to characterize the composites, which were postcured under various conditions. The glass transition temperature and fragility both depended on both of the curing conditions and the volume fraction of silica particles. The glass transition temperature increased with the postcuring time and temperature, while the fragility generally decreased as the volume fraction increased. There was no direct correlation between the glass transition temperature and fragility. The fracture toughness depended on both the glass transition temperature and fragility. The composites with a high glass transition temperature and low fragility had high fracture toughness. These results indicate that the glass transition temperature and fragility are useful parameters for estimating the fracture toughness of the silica particulate‐filled epoxy composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2261–2265, 2002     

Fracture toughness of bisphenol A‐type epoxy resin

The relationship between the postcuring conditions and the fracture toughness of a bisphenol A‐type epoxy resin cured with acid anhydride was investigated. The glass transition temperature and fragility parameter, derived from the thermo‐viscoelasticity, were used to characterize the epoxy resin postcured under various conditions. Relationship between these two parameters and the fracture toughness was then investigated, based on the fractography results of a microscopic roughness examination of a fractured surface. The values of the glass transition temperature and fragility greatly depended on the postcuring conditions. The glass transition temperature was approximately 400 K when the crosslinking reaction was saturated. The fragility was independent of the saturation of the reaction and varied between 50 and 180. The results of the fracture test and fractography examination showed that there was no direct correlation between the glass transition temperature, the fracture toughness, and the roughness. On the other hand, there was a correlation between the fragility, fracture toughness, and roughness when the glass transition temperature saturated (at 400 K). As the fragility decreased from 180 to 50, the fracture toughness increased from 0.6 to 1.1 MPa · m^1/2 at the same glass transition temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 10: 2266–2271, 2002     

The Chemistry of PCR Primers: Concept and Application

DNA is a typical organic compound with marked differences from other chemicals and biopolymers because DNA can be amplified by the enzyme polymerase. DNA can be, in principle, amplified from a single copy by the polymerase chain reaction (PCR). In this review, we focus our attention on the chemistry of PCR primers. Because PCR is basic technology in biology research fields, we sometimes use chemically labeled primers without any awareness of the chemistry they leave behind. We would like to emphasize that chemically labeled primers contain a lot of potential for different chemistry ideas and much study is still necessary to advance PCR for single-nucleotide polymorphism (SNP) typing, genetic diagnosis, and other fields. Two categories of primers, affinity-capture primers and signaling primers, are discussed from the viewpoints of their chemical concepts and applications. Affinity-capture primers are used for purification, isolation, and manipulation of PCR products by high specificity and affinity to the cognate molecules by molecule molecule interactions, whereas signaling primers report the hybridization and/or progress of PCR amplification by a signal change, in most cases by a fluorescence change. The content of this review may be useful for a better understanding of the chemistry of PCR primers and, more importantly, for the invention of novel PCR chemistry.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

Dynamic in situ observation of automotive catalysts for emission control using X-ray absorption fine structure

Two main pivotal subjects of research in automotive catalysts were studied by modern X-ray absorption analysis techniques. One is oxygen storage/release behaviour, and the other is sintering inhibition of Pt particles. First, three types of CeO₂–ZrO₂ (Ce:Zr = 1:1 molar ratio) compounds with different oxygen storage/release capacities and different structural properties were prepared, and the valence change of Ce as a function of temperature during oxygen release/storage processes was investigated. The reduction of surface Ce mainly occurred in the range 100–170 °C, and the reduction of bulk Ce progressed at high temperatures of 170 °C and above. The Ce reduction behaviour depended not only on the homogeneity of the Ce and Zr for bulk reduction at high temperatures but also on the particle size of the CeO₂–ZrO₂ samples for surface reduction at low temperatures. Secondly, sintering inhibition of Pt in Pt/Al₂O₃, Pt/MgO and Pt/ceria-based catalysts after 800 °C ageing in air was studied. We found that the Pt–O–M (M = Mg, Ce) bond acted as an anchor and inhibited the sintering of Pt particles on MgO or ceria-based oxide. Especially, it was noteworthy that the Pt–O–Ce⁴⁺ bond on the ceria-based support breaks easily through the reduction of Ce (Ce⁴⁺ → Ce³⁺) during the usual stoichiometric and reducing conditions.     

Deformation-induced grain coalescence in an electrodeposited pure iron sheet studied by in situ neutron diffraction and electron backscatter diffraction

The plastic deformation behavior of an ultrafine-grained electrodeposited pure iron sheet with a strong {1 1 1}〈h k l〉 texture was studied by in situ neutron diffraction during tensile deformation at room temperature and by electron backscatter diffraction (EBSD). The combination of volume-averaged crystallographic orientation changes determined by neutron diffraction and the local orientation relationship determined by EBSD reveals a texture change to {1 1 1}〈1 1 0〉 and corresponding microstructural changes with tension deformation. Related to such grain rotation, grain coalescence on deformation was found using semi in situ EBSD. The results obtained are explained using a characteristic slip model, which also gives a reason for the ultrahigh Lankford value of this material.