Production of eicosapentaenoic acid by a bacterium isolated from mackerel intestines

Optimization of culture conditions for the growth rate, 5,8,11,14,17-cis-Eicosapentaenoic acid (EPA) content and EPA productivity of a bacterium isolated from Pacific mackerel intestines was investigated by use of a culture medium containing 1.00 wt% peptone and 0.50 wt% yeast extract in an artificial sea water (ASW). Cultivation temperature affected the growth rate and cellular EPA content of the bacterium. The cellular EPA content at 8°C was as great as 16.8 mg/g of dry cells, which was more than two times greater than that at 25°C (7.3 mg/g of dry cells), although the growth rate showed a maximum at 25°C. Both the yield of bacterial cells and the cellular EPA content at 25°C reached maximum values when the pH of the culture medium was nearly 7.0 and when the concentration of ASW was 100% (v/v). Under optimum culture conditions [25°C pH 7.0 and 100% (v/v) ASW], the amount of EPA accumulated in the cellular lipids reached 45.6 mg/L of culture broth after 8 hr.     

Difference in environmental degradability between poly(ethylene succinate) and poly(3-hydroxybutyrate)

A chemosynthetic aliphatic polyester, poly(ethylene succinate) (PESu), was degraded by a poly(3-hydroxybutyrate) (P(3HB)) depolymerase in vitro. While P(3HB) exhibited good biodegradability in all environments, PESu hardly underwent biodegradation in a marine environment. To understand the difference in environmental degradability between PESu and P(3HB), we investigated the distribution of P(3HB)- and PESu-degrading microbes in various environments. PESu-degrading microbes were never detected in marine environments. PESu-degrading bacteria isolated from various environments in this study belonged to the phyla Firmicutes and Proteobacteria. Most PESu-degrading bacterial isolates could not degrade P(3HB), suggesting that PESu was not degraded by P(3HB) depolymerase in actual environments. In addition, all bacterial isolates that were screened for P(3HB) degrading activity from various environments in this study did not degrade PESu, suggesting that PESu does not induce P(3HB) depolymerase in their bacteria and P(3HB)-degrading bacteria are not involved in biodegradation of PESu in actual environments. Taken together, these results could be related with the low biodegradability of PESu in marine environments.     

Hydrogen adsorption on boron doped graphene: an ab initio study

(i)?The electronic and structural properties of boron doped graphene sheets, and (ii)?the chemisorption processes of hydrogen adatoms on the boron doped graphene sheets have been examined by ab initio total energy calculations. In (i)?we find that the structural deformations are very localized around the boron substitutional sites, and in accordance with previous studies (Endo et al 2001 J.?Appl.?Phys. 90 5670) there is an increase of the electronic density of states near the Fermi level. Our simulated scanning tunneling microscope (STM) images, for occupied states, indicate the formation of bright (triangular) spots lying on the substitutional boron (center) and nearest-neighbor carbon (edge) sites. Those STM images are attributed to the increase of the density of states within an energy interval of 0.5?eV below the Fermi level. For a boron concentration of ～2.4%, we find that two boron atoms lying on the opposite sites of the same hexagonal ring (B1-B2 configuration) represents the energetically most stable configuration, which is in contrast with previous theoretical findings. Having determined the energetically most stable configuration for substitutional boron atoms on graphene sheets, we next considered the hydrogen adsorption process as a function of the boron concentration, (ii). Our calculated binding energies indicate that the C-H bonds are strengthened near boron substitutional sites. Indeed, the binding energy of hydrogen adatoms forming a dimer-like structure on the boron doped B1-B2 graphene sheet is higher than the binding energy of an isolated H(2) molecule. Since the formation of the H dimer-like structure may represent the initial stage of the hydrogen clustering process on graphene sheets, we can infer that the formation of H clusters is quite likely not only on clean graphene sheets, which is in consonance with previous studies (Hornek?r et al 2006 Phys.?Rev.?Lett. 97 186102), but also on B1-B2 boron doped graphene sheets. However, for a low concentration of boron atoms, the formation of H dimer structures is not expected to occur near a single substitutional boron site. That is, the formation (or not) of H clusters on graphene sheets can be tuned by the concentration of substitutional boron atoms.     

Motion of Crystal Particles by the Electromagnetic Vibrations in Mg-Cu-Y Bulk Metallic Glasses

The method for producing Mg-Cu-Y and Fe-Co-B-Si-Nb bulk metallic glasses using electromagnetic vibrations is effective in forming the metallic glass phase. Disappearance or decrement of clusters by the electromagnetic vibrations applied to the liquid state is considered to cause suppression of crystal nucleation, because the electromagnetic vibrations vibrate the clusters vigorously in the melt. The purpose of this study was to investigate motion of the crystal particles by the electromagnetic vibrations in Mg-Cu-Y bulk metallic glasses. The electromagnetic vibration force vibrated the crystal particles or the clusters that become crystal nuclei in the melt, because the electric current for the electromagnetic vibrations concentrates in those. Thus, the electromagnetic vibrations were found to select vibration particles from the melt. Moreover, it was considered that composites for which second phases or other compounds are dispersed into the metallic glass phase or a nanostructure phase can be produced by the electromagnetic vibration process. This article is based on a presentation given in the symposium entitled “Bulk Metallic Glasses IV,” which occurred February 25–March 1, 2007 during the TMS Annual Meeting in Orlando, Florida under the auspices of the TMS/ASM Mechanical Behavior of Materials Committee.     

Experimental study of gas–liquid two-phase flow through packed bed under natural circulation conditions

Dry-out phenomena in packed beds or porous media may cause a significant digression of cooling/reaction performance in heat transfer/chemical reactor systems. One of the phenomena responsible for the dry-out in packed beds is known as the counter-current flow limitation (CCFL). In order to investigate the CCFL phenomena induced by gas–liquid two-phase flow in packed beds inside a pool, a natural circulation packed bed test facility was designed and constructed. A total of 27 experimental conditions covering various packing media sizes (sphere diameters: 3.0, 6.4 and 9.5 mm), packed bed heights (15, 35 and 50 cm) and water level heights (1.0, 1.5 and 2.0 m) were tested to examine the CCFL criteria with adiabatic air–water two-phase flow under natural circulation conditions. Both CCFL and flow reversal phenomena were observed, and the experimental data including instantaneous and time-averaged void fraction, differential pressure and superficial gas–liquid velocities were collected. The CCFL criteria were determined when periodical oscillations of void fraction and differential pressure appear. In addition, the Wallis correlation for CCFL was utilized for data analysis, and the Wallis coefficient, C, was determined experimentally from the packed bed CCFL tests. Compared to the existing data-sets in literature, the higher C values obtained in the present experiment suggest a possibly higher dry-out heat flux for natural circulation debris systems, which may be due to the water supply from both top and bottom surfaces of the packed beds. Considering the effects of bed height and hydraulic diameter of the packing media, a newly developed model for the Wallis coefficient, C, under natural circulation CCFL is presented. The present model can predict the experimental data with an averaged absolute error of ±7.9%.     

Augmenting Edge-Connectivity between Vertex Subsets

Given a directed or undirected graph G=(V,E), a collection ${\mathcal{R}}=\{(S_{i},T_{i}) \mid i=1,2,\ldots,|{\mathcal{R}}|, S_{i},T_{i} \subseteq V, S_{i} \cap T_{i} =\emptyset\}$ of two disjoint subsets of V, and a requirement function $r: {\mathcal{R}} \to\mathbb{R}_{+}$ , we consider the problem (called area-to-area edge-connectivity augmentation problem) of augmenting G by a smallest number of new edges so that the resulting graph $\hat{G}$ satisfies $d_{\hat{G}}(X)\geq r(S,T)$ for all X?V, $(S,T) \in{\mathcal{R}}$ with S?X?V?T, where d _G (X) denotes the degree of a vertex set X in G. This problem can be regarded as a natural generalization of the global, local, and node-to-area edge-connectivity augmentation problems. In this paper, we show that there exists a constant c such that the problem is inapproximable within a ratio of $c\log{|{\mathcal{R}}|}$ , unless P=NP, even restricted to the directed global node-to-area edge-connectivity augmentation or undirected local node-to-area edge-connectivity augmentation. We also provide an ${\mathrm{O}}(\log{|{\mathcal{R}}|})$ -approximation algorithm for the area-to-area edge-connectivity augmentation problem, which is a natural extension of Kortsarz and Nutov’s algorithm (Kortsarz and Nutov, J. Comput. Syst. Sci., 74:662–670, 2008). This together with the negative result implies that the problem is ${\varTheta}(\log{|{\mathcal{R}}|})$ -approximable, unless P=NP, which solves open problems for node-to-area edge-connectivity augmentation in Ishii et al. (Algorithmica, 56:413–436, 2010), Ishii and Hagiwara (Discrete Appl. Math., 154:2307–2329, 2006), Miwa and Ito (J. Oper. Res. Soc. Jpn., 47:224–243, 2004). Furthermore, we characterize the node-to-area and area-to-area edge-connectivity augmentation problems as the augmentation problems with modulotone and k-modulotone functions.     

Content-Dependent Question Generation Using LOD for History Learning in Open Learning Space

The objective of this research is to use current linked open data (LOD) to generate questions automatically to support history learning. This paper tries to clarify the potential of LOD as a learning resource. By linking LOD to natural language documents, we created an open learning space where learners have access to machine understandable natural language information about many topics. The learning environment supports learners with content-dependent questions. In this paper, we describe the question generation method that creates natural language questions using LOD. The integrated data is combined to a history domain ontology and a history dependent question ontology to generate content-dependent questions. To prove whether the generated questions have a potential to support learning, a human expert conducted an evaluation comparing our automatically generated questions with questions generated manually. The results of the evaluation showed that the generated questions could cover more than 80% of the questions supporting knowledge acquisition generated by humans. In addition, we confirmed the automatically generated questions have a potential to reinforce learners’ deep historical understanding.