Factors influencing the migration of bisphenol A from cans

The objective of this study was to determine whether there is a relationship between bisphenol A (BPA) migration from metal cans and container contents (glucose, sodium chloride, and vegetable oil), heating time, and/or temperature. Cans containing 5 to 20% glucose solution, 1 to 10% sodium chloride solution, and vegetable oils (corn, olive, and soybean oil) were heated at 121 degrees C for 30 min. Water samples were heated at 105 degrees C for 30 min and at 121 degrees C for 15, 30, and 60 min, respectively. In the test involving water samples, it was found that temperature's effect on BPA migration from cans can be more extensive than that of heating time. When cans were heated at 121 degrees C, the presence of 1 to 10% sodium chloride or vegetable oils greatly increased the migration of BPA from the cans. Moreover, the presence of 5 to 20% glucose in cans heated to 121 degrees C resulted in increased BPA migration relative to that for water controls.     

A methodology for energy-efficient renovation of existing residential buildings in China and case study

Energy-efficient renovation had been accepted widely as the best solution for aging residential buildings. In order to guide such real projects in China and maximize the benefits in energy, environmental and economic fields from these activities, this article developed a methodology to assist decision-makers to design energy-efficient renovation plan in the early stage of design phase, and used a case study to demonstrate how to apply it. Following it, a suitable energy-efficient renovation plan, integrating all effective and available energy-saving measures, could be put forward for the subject building, and its effects on reduction of energy consumption, CO₂ emission and cost be evaluated accurately. The results showed that from the viewpoint of reducing energy consumption and CO₂ emission, energy-efficient renovation was worth being implemented to upgrade the existing residential buildings in China, but from the economic view, governments should provide certain subsidy for such real projects and increase electricity price.     

Near‐Infrared Fluorescent Silica/Porphyrin Hybrid Nanorings for In Vivo Cancer Imaging

Ring‐shaped silica nanoparticles are synthesized with a high tetrakis(4‐carboxyphenyl)porphyrin (TCPP) content or silica/TCPP hybrid nanorings (HNRs) using a one‐pot sol‐gel reaction with a TCPP‐binding silica precursor for fluorescence imaging of tumor. The shape of the HNRs is a reflection of abundant ring‐shaped TCPP aggregates in the silica matrix. The HNRs are of a size that makes them susceptible to the enhanced permeability and retention effect. For comparison, the TCPP‐doped silica nanoparticles are synthesized using a conventional method. The nanoparticles are spherical in shape because little TCPP is contained in the silica matrix and are designated as TCPP‐containing silica nanospheres (NSs). The absorption bands of the HNRs shift by about 20 nm toward longer wavelengths compared with the TCPP bands. This redshift leads the excitation wavelength of the HNRs into the near‐infrared (NIR) region. Therefore, the HNRs are excited by NIR light to emit strong fluorescence, although the NSs emit no fluorescence. The PEGylated HNRs (PEG‐HNRs) are uncharged and possess a significantly longer blood circulation time than PEG‐NSs. The PEG‐HNRs accumulate in tumor through multiple factors including their size, uncharged surface, unique shape, and long circulation time in blood, resulting in the acquisition of clear images of tumor.     

Quantitative detection of previously characterized syntrophic bacteria in anaerobic wastewater treatment systems by sequence-specific rRNA cleavage method

Quantitative monitoring method of two important trophic groups of bacteria in methanogenic communities was established and applied to six different anaerobic processes. The method we employed was based upon our previous sequence-specific rRNA cleavage method that allows quantification of rRNA of target groups so that the populations reflecting in situ activity could be determined. We constructed a set of scissor probes targeting the Chloroflexi group known as ‘semi-syntrophic’ heterotrophic bacteria and fatty acid-oxidizing syntrophs to determine their relative abundance in the processes. By using the method, we found that several reactors harbored a large amount of organisms belonging to the phylum Chloroflexi accounting for up to 20% of the total prokaryotic populations. Propionate-oxidizing syntrophs, Syntrophobacter, Smithella and Pelotomaculum were also found to be significant comprising up to 3.9% of the total populations, but their distribution is highly dependent on the process examined. This is the first clear, non-PCR based quantitative evidence that those organisms play active roles under in situ methanogenic conditions.     

Adsorption and desorption properties of expanded poly(tetrafluoroethylene) films grafted with DMAEMA and their regeneration

An investigation was undertaken on the adsorption and desorption properties of the expanded poly (tetrafluoroethylene) (ePTFE) films grafted with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) to anionic dye anions with one to three sulfonic groups in response to temperature changes. The amount of adsorbed metanil yellow (MY) anions increased with the grafted amount and most of the dimethylamino groups appended to the grafted PDMAEMA chains worked as an adsorption site to MY anions for the DMAEMA‐grafted ePTFE (ePTFE‐g‐PDMAEMA) films with the grafted amounts of higher than 1.1 mmol/g. When the dye‐anion‐adsorbed ePTFE‐g‐PDMAEMA films were alternately immersed in water at two different temperatures, dye anions were desorbed from the ePTFE‐g‐PDMAEMA films at higher temperatures without any chemical agents. The amount of desorbed dye anions increased with an increase in the temperature of water from 40 to 80°C. Desorption of dye anions is caused by either deprotonation of dimethylamino groups appended to the grafted PDMAEMA chains or thermosensitive contraction of the grafted PDMAEMA chains. These results indicate that the ePTFE‐g‐PDMAEMA films can be applied as a regenerative ion‐exchange membrane for adsorption and desorption processes of anionic compounds in response to the temperature change. The thermally regenerative ion‐exchange properties of the ePTFE‐g‐PDMAEMA films was superior to that of the PE‐g‐PDMAEMA films reported in our previous article in the fact that the total degree of desorption was higher for the ePTFE‐g‐PDMAEMA films. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Partial Peptide of α-Synuclein Modified with Small-Molecule Inhibitors Specifically Inhibits Amyloid Fibrillation of α-Synuclein

We have previously reported that pyrroloquinoline quinone (PQQ) prevents the amyloid formation of α-synuclein, amyloid β_1–42 (Aβ_1–42), and mouse prion protein. Moreover, PQQ-modified α-synuclein and a proteolytic fragment of the PQQ-modified α-synuclein are able to inhibit the amyloid formation of α-synuclein. Here, we identified the peptide sequences that play an important role as PQQ-modified specific peptide inhibitors of α-synuclein. We demonstrate that the PQQ-modified α-Syn_36–46 peptide, which is a partial sequence of α-synuclein, prevented α-synuclein amyloid fibril formation but did not inhibit Aβ_1–42 fibril formation. In addition, the α-synuclein partial peptide modified with other small-molecule inhibitors, Baicalein and epigallocatechin gallate (EGCG), prevented α-synuclein fibril formation. Currently reported quinone amyloid inhibitors do not have selectivity toward protein molecules. Therefore, our achievements provide a novel strategy for the development of targeted specific amyloid formation inhibitors: the combination of quinone compounds with specific peptide sequence from target proteins involved in amyloid formation.     

Surfactant effects on hydrate formation in an unstirred gas/liquid system: An experimental study using methane and sodium alkyl sulfates

This paper reports an experimental study on the effects of surfactant additives on the formation of a clathrate hydrate in a quiescent methane/liquid-water system, which was initially composed of a 300-cm³ aqueous phase and an ∼640-cm³ methane-gas phase, then successively provided with methane such that the system pressure was held constant. The surfactants used in the present study were three sodium alkyl sulfates appreciably different in the alkyl chain length—they were sodium dodecyl sulfate (abbreviated as SDS), sodium tetradecyl sulfate (abbreviated as STS) and sodium hexadecyl sulfate (abbreviated as SHS). For each surfactant added to water up to, at most, 1.82-3.75 times the solubility, we performed visual observations of hydrate formation simultaneously with the measurements of methane uptake due to the hydrate formation. The qualitative hydrate-formation behavior thus observed was almost the same irrespective of the species as well as the initial concentration of the surfactant used; i.e., thick, highly porous hydrate layers were formed and grew on the horizontal gas/liquid interface and also on the test-chamber wall above the level of the gas/liquid interface. In each experimental operation, hydrate formation continued for a limited time (from ∼6 to ) and then practically ceased, leaving only a small proportion (typically 15% or less) of the aqueous solution unconverted into hydrate crystals. The variations in the time-averaged rate of hydrate formation (as measured by the rate of methane uptake) and the final water-to-hydrate conversion ratio with the initial concentration of each surfactant were investigated. Moreover, we examined the promotion of hydrate formation with the aid of a water-cooled cold plate, a steel-made flat-plate-type heat sink, vertically dipped into the aqueous phase across the gas/liquid interface.     

Characteristics of atmospheric pressure plasma jet generated by compact and inexpensive high voltage modulator

An atmospheric pressure plasma jet has been successfully generated using a compact high voltage modulator driven by 12 V alkaline batteries. A jet nozzle was composed of a quartz tube with two cylindrical electrodes. The grounded electrode was rolled on the tube and the powered one was inserted in the tube for discharging at lower voltage. V-Q Lissajous analysis of the plasma jet indicated that energy and power consumed for the plasma generation were linear along the distance between the electrodes. Length of the plasma plume from the tip of the tube was 11 mm for the gap length of 5 mm and the input voltage DC of 12 V. At the input voltage, the energy and power consumed for the plasma generation were 4.1 μJ and 0.12 W, respectively. Optical emission spectroscopy analysis of the plasma showed that the plasma contained hydroxyl radicals and exited nitrogen molecules which are chemically active species. The plasma jet can be applied to plasma cleaning for material surface though was generated with the alkaline batteries.