Aseismic evaluation for aging degradation of nuclear power plant components

The commercial operation of light water reactor plants in Japan already has a history of nearly 30 years. Since the beginning of the 1990s, studies have been conducted on aging degradation of nuclear power plants in Japan and abroad and, earlier in 1999, the domestic program of plant life management (PLM) was settled on. The program is based on the results of the PLM Study, which started in 1997. The purpose of the study was to develop the preventive maintenance program with an evaluation of aging degradation for maintaining the functions of plant component equipment. Taking account of the need for proper management of aging degradation, meanwhile, the technical evaluation of aseismic capability of aged plants is also considered to be important. Based on this concept, we evaluated the impact of assumed aging degradation on the aseismic capability of the plant facilities and structures covered by the PLM Study. In the aseismic evaluation, aging degradation modes selected in the PLM Study were divided into two categories—the one is including some degradation modes which impact on the aseismic capability of the facilities and structures should be taken into account, the other is including those whose impact might be ignored. Then the aging degradation modes composing the former one were quantitatively evaluated primarily based on the Technical Guidelines for Aseismic Design of Nuclear Power Plants (JEAG-4601) (NUREG/CR-6241, 1987). The result of the evaluation indicated that no aging degradation mode to be reflected in the maintenance program was extracted from the viewpoint of securing the aseismic capability of the plant components. However, establishment of rational evaluation methods for aging degradation, e.g. aseismic capability evaluation of thinned piping systems, was made a future technical subject.     

A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.     

Polymer structure formed in radiation-induced graft polymerization

Methacrylic acid (MAA) and methyl methacrylate (MMA) were grafted onto nylon 6, cellulose triacetate, cotton, viscose rayon, and polyester fibers, and the stereoregularities of the grafted polymers were determined. The graft polymerization was carried out with preirradiation techniques using γ-rays from a Co 60 source. The grafted copolymers were then separated from the homopolymers by Soxhlet extraction. The grafted (branch) polymers were isolated from the trunk polymers by acid hydrolysis and their stereoregularity was determined with a 100 MHz NMR spectrometer. The stereo-regularity of PMAA or PMMA grafted onto viscose rayon or cotton fiber was different from that of the polymers formed in ordinary radical polymerization.     

Photo-induced radicals in glucose and cellobiose

Photo-induced radicals in glucose and cellobiose, the model compounds of cellulose molecule, were studied by ESR spectrometry. Very poor formation of radicals in glucose as compared to those in cellobiose was observed. However, a spectrum showing a singlet line was easily produced by the use of light involving shorter wavelengths. It was estimated to be due to the radical formed at the reducing C₁ position of glucose molecule. By paper chromatography, the photo-irradiated cellobiose was confirmed to split into glucose through scission of glucosidic bonds in the molecule. The ESR spectrum of the acid-hydrolyzed cellulose similar to that of the unhydrolyzed sample was a seven-line spectrum, but the relative signal intensity was here markedly low. This phenomenon seems to be caused by the reduction of amorphous portion in the samples due to acid hydrolysis. It was concluded that the glucosidic bonds in cellobiose and cellulose molecules are very active toward light and play an important role in the radical formation in photo-irradiated samples.     

In-line type micropulse lidar with an annular beam: experiment

An in-line type compact micropulse lidar (MPL) with an annular beam was developed for low-altitude cloud measurement. An optical circulator and a couple of axicon prisms for an annular beam were installed on the lidar optics. The advantage of using the in-line MPL is its ability to obtain a near-range measurement with a narrow field of view of 0.1 mrad and to obtain a depolarization measurement of the orthogonally polarized echoes caused by ice crystals of a low-altitude cloud. The total insertion loss of the lidar optics was 3 dB. Detectors such as avalance photodiode detectors can be operated in an analog mode near the breakdown voltage because of the high isolation of the optical circulator. The ideal lidar echo variation from the nearest distance was verified by measuring the mountain echoes at various distances. The depolarization measurement of a low-altitude ice cloud was also demonstrated.     

Photocatalytic decomposition of 2-propanol in air by mechanical mixtures of TiO2 crystalline particles and silicalite adsorbent: The complete conversion of organic molecules strongly adsorbed within zeolitic channels

Fundamental photocatalytic behaviors were investigated for mechanical mixtures of TiO₂ crystalline particles (P25) and MFI type zeolite (silicalite) in the decomposition reaction of 2-propanol vapor in air for the first time. Mechanical mixing enables reliable comparisons to be made between photocatalysts because the contents of TiO₂ and the adsorbent can be widely varied (51 times in this study) while keeping the particle size and crystallinity of TiO₂ unchanged. That is, the use of mechanical mixture highlights the behavior of molecules adsorbed in the microporous crystals, keeping the TiO₂ unchanged. In the case of the mixed photocatalysts, the initial 2-propanol concentration in the gas phase was significantly reduced because of adsorption into the zeolite. After photo-irradiation started, 2-propanol was decomposed to CO₂ with no (or trace amount of) acetone detected in the gas phase. The analysis of final amount of CO₂ formed by the decomposition demonstrated that just by the mechanical mixing of TiO₂ and zeolite, the TiO₂ photocatalyst decomposed completely the reactant and intermediate molecules strongly adsorbed into the zeolite. On the other hand, in reference experiments in which TiO₂ and zeolite were not mixed and were separately placed in a photoreactor, the organic compounds strongly adsorbed in the zeolite could not be decomposed to CO₂ by the photocatalyst. It is notable that the CO₂ formation rates for the mixed photocatalysts were mostly constant for those comprising 40 wt% or larger amounts of zeolite, while being slower than for pure TiO₂. The rate-determining step was discussed based on these data. The present study showed that the mixed photocatalyst could remove organic vapors by adsorption in the dark and decompose completely to CO₂ at moderate reaction rates under photo-irradiation with minimized evolution of intermediate molecules into the gas phase.     

Metamorphic AlInAs/GaInAs HEMTs on GaAs Substrates by MOCVD

Metamorphic AlInAs/GaInAs high-electron mobility transistors with very good device performance have been grown by metal-organic chemical vapor deposition (MOCVD), with the introduction of an effective multistage buffering scheme. Measured room-temperature Hall mobilities of the 2-DEG were over 8000 cm²/V ldr s with sheet carrier densities larger than 4 times 10¹² cm^-2. Transistors with 1-mum gate length exhibited transconductance up to 626 mS/mm. The unity current gain cutoff frequency f_T and the maximum oscillation frequency f_max were 39.1 and 71 GHz, respectively. These results are very encouraging toward the manufacturing of metamorphic devices on GaAs substrates by MOCVD.     

CoCl(2) inhibits neural differentiation of retinoic acid-treated embryoid bodies

The effects of CoCl(2) on retinoic acid (RA)-treated embryoid bodies (EBs) were investigated. Four-day EBs were treated with 5x10(-6) M of RA for 4 d, then subjected to attached culturing for 7 d in the presence of CoCl(2) at 0, 20, and 100 microM. Differentiation into MAP2- and GFAP-immunopositive cells was inhibited by CoCl(2) in a dose-dependent manner. Next, RA-treated EBs were dissociated into single cells and cultured for 7 d at an initial cell density of 1x10(3)/cm(2). The number of cells increased in a CoCl(2)-dose dependent fashion. In cultures with 100 microM of CoCl(2), more than 90% of the cells were immunopositive for nestin and nestin-immunopositive cells formed clusters, while there were few cells immunopositive for MAP2 or GFAP. These results suggest that CoCl(2) inhibits neural differentiation of RA-treated EB cells and promotes the proliferation of nestin-immunopositive cells, i.e., embryonic stem (ES)-derived neural stem-like cells.     

Microstructural,Mechanical, and Tribological Properties of Rice Husk–Based Carbon: Effect of Carbonizing Temperature

In this study, we investigated the microstructural, mechanical, and tribological properties of rice husk (RH)-based carbon carbonized at various carbonizing temperatures under dry conditions. All samples exhibited amorphous carbon structures and the X-ray diffraction spectra of the samples carbonized at 1300 and 1400?°C indicated the presence of a polymorphic crystals of silica. The hardness increased with temperature due to the densification of the structure and the presence of the hard crystalline silica. At low normal loads, the mean friction coefficient of the material decreased as the carbonizing temperature was increased from 600 to 800?°C and slightly decreased as the carbonizing temperature was further increased from 800 to 1400?°C. At the highest load, all samples, except for that carbonized at 600?°C, exhibited extremely low friction coefficients (around 0.05). The wear rates of the all samples were smaller than 10^?5 mm³/N·m, indicating that RH carbon exhibits sufficient wear resistance. A Raman spectroscopic analysis of the worn surface of a steel ball revealed that the transfer layer at 600?°C had a less graphitic structure compared to the other carbonizing temperature. Based on these findings, we recommend an optimal carbonizing temperature for applications of sliding materials exposed to dry sliding contact.     

Chemical and DNA authentication of taste variants of Gynostemma pentaphyllum herbal tea

Gynostemma pentaphyllum Makino (Gp) was once used as a sweetener in Japan and is now widely consumed as an herbal tea worldwide for lowering cholesterol levels. Two taste variants, bitter and sweet, of Gp exist in the commercial market, but they cannot be differentiated morphologically nor by existing chemical analytical methods. This has been creating a problem in quality control of Gp products. In the present study, using HPLC-DAD and HPLC–ESI-MS analysis, we found that the Gp saponins, not flavonoids, from the sweet and bitter variants have distinctly different profiles. In addition, the two variants share only 69.01% homology in the ribosomal ITS-1 region, suggesting a phylogenic gap between these two variants. The combinations of chemical profiling and phylogenic analysis clearly confirm, for the first time, the distinction between these two taste variants. This information has direct application in the authentication and quality assessment of the various Gynostemma tea products.