Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Effects of dietary lipids on daunomycin-induced nephropathy in mice: comparison between cod liver oil and soybean oil

Although it is well known that dietary lipids affect the course of glomerulonephritis in rats and humans, the precise mechanisms involved have not been fully elucidated. The aim of this study was to investigate the effects of different types of dietary lipids (fish oil and vegetable oil) on daunomycin (DM)-induced nephropathy in mice fed on soybean oil (SO) or cod liver oil (CLO). Urinary protein excretion, serum albumin, creatinine, total cholesterol, and TG were measured, and glomerular histological changes were evaluated. Antioxidant enzymes were also measured, along with the levels of lipid peroxide, GSH, thromboxane (Tx) B_2′ and 6-keto prostaglandin F_1α in renal cortical tissue. Dietary CLO significantly reduced urinary albumin excretion and ameliorated the histological changes induced by DM. The increase of tissue lipid peroxide levels seen in SO-fed mice was suppressed in CLO-fed mice, whereas CLO-fed mice showed higher GSH levels than SO-fed mice throughout the experiment. In addition, renal tissue GSH peroxidase activity was significantly higher at 72 h after DM injection in CLO-DM mice than in SO-DM mice. Both renal cortical TxB₂ and 6-keto PGF_1α levels were significantly lower in CLO-DM mice than in SO-DM mice. These results suggest that inhibition of oxidative damage by dietary CLO played an important role in the prevention of DM nephropathy in this mouse model. The effect of CLO was closely associated with the inhibition of Tx synthesis.     

Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers

Equimolar blend of poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) was melt spun into fibers and the relations among the processing conditions, crystalline structures, thermal properties, and mechanical properties were investigated. Drawing and annealing were performed in order to obtain fiber mainly consisting of the stereocomplex crystal phase. Fibers drawn at various temperatures exhibited either amorphous, highly oriented homo crystal, or the mixture of homo and stereocomplex with a fairly low orientation depending on the drawing temperature. Annealing of the drawn fibers at an elevated temperature higher than the melting temperature of homo crystal increased the stereocomplex content significantly. The fractions of the homo and the stereocomplex crystals strongly depended on the higher-order structure of the drawn fibers and the annealing temperature.     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

Expectation-maximization algorithms for inference in Dirichlet processes mixture

Mixture models are ubiquitous in applied science. In many real-world applications, the number of mixture components needs to be estimated from the data. A popular approach consists of using information criteria to perform model selection. Another approach which has become very popular over the past few years consists of using Dirichlet processes mixture (DPM) models. Both approaches are computationally intensive. The use of information criteria requires computing the maximum likelihood parameter estimates for each candidate model whereas DPM are usually trained using Markov chain Monte Carlo (MCMC) or variational Bayes (VB) methods. We propose here original batch and recursive expectation-maximization algorithms to estimate the parameters of DPM. The performance of our algorithms is demonstrated on several applications including image segmentation and image classification tasks. Our algorithms are computationally much more efficient than MCMC and VB and outperform VB on an example.     

Single-crystal growth and anisotropic electrical properties of (La1?xCax)2CaCu2O6

Large single crystals of (La_1–x Ca _x )₂CaCu₂O₆ were synthesized by the travelling solvent floating zone (TSFZ) technique. The dimension of the grown boules was typically 4 mm×30 mm long with thec-axis perpendicular to the growth direction. After oxygen loading at 1080°C in 400 atm of O₂, they became superconductive with a sharp transition at around 50 K. The resistivity was metallic both along thec-axis and within theab-plane, with an anisotropy ratio of ²( _c/ _ab ) 50 which is almost independent of temperature. Details of the crystal growth, heat treatment procedures, and the results of electrical and magnetic property measurements are presented.