Contents of eight harmful elements in baby toys and their migration tests

Levels of eight harmful elements, i.e., antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium, were investigated in 45 baby toys and 10 paints, which were mainly made of polyvinyl chloride. All samples contained barium at levels of 0.3-3,700 mg/kg, several samples contained cadmium (0.2-26 mg/kg), chromium (0.5-280 mg/kg) and lead (1.5-1,300 mg/kg), and one sample contained antimony (5.3 mg/kg). They might have been used as colorants of the toy materials and paints. They were then evaluated using the migration test of ISO 8124-3, in which samples were ground up, and then soaked in 0.07 mol/L HCl at 37 degrees C for two hours. Barium, cadmium, chromium and lead migrated from some of the samples, but at levels lower than the migration limits required by ISO 8124-3. Compared with the Japanese official method, the ISO method resulted in higher migration, but there are significant differences in the migration limits, test method, and so on between them. Further investigation is needed in this area.     

Accumulation of paralytic shellfish poison (PSP) and biotransformation of its components in oysters, Crassostrea gigas, fed with the toxic dinoflagellate Alexandrium tamarense

As a part of our studies on the mechanism of uptake of paralytic shellfish poison (PSP) and the kinetics of its accumulation in bivalves, oysters Crassostrea gigas were experimentally contaminated with PSP by being fed with the toxic dinoflagellate Alexandrium tamarense for 2, 4, 6, 8 and 10 days. Temporal variations in the PSP contents and their profiles in oysters during the feeding experiment were monitored by high-performance liquid chromatography (HPLC) and the toxin profile of the oysters was compared with that of A. tamarense. Toxins excreted from the infested oysters into the seawater for 2 and 10 days were recovered and analyzed by HPLC. PSP toxicity rapidly appeared in the tissues of oysters and their toxicity levels reached 0.6 (0.3), 2.2 (1.1), 1.0 (0.5), 3.4 (1.6) and 1.1 (0.5) MU/g (nmol/g) shucked meat at 2, 4, 6, 8 and 10 days, respectively. The accumulation rates of toxin, calculated from the total amount (nmol) of toxins expressed by the total cell number fed during the exposure period and the toxicity of the oysters, were 14.1, 18.7, 5.1, 14.9 and 3.2% for 2, 4, 6, 8 and 10 days. During feeding experiments, the toxin profile of oysters changed substantially, showing marked differences from the proportions found in the toxigenic dinoflagellate used as food. The toxin components in this strain existed almost exclusively as beta-epimers, which accounted for 66.3 mol% of the total. This contrasts with the case of the oysters, where the beta-epimers represented 24.8, 29.8, 25.1, 27.3 and 25.2 mol% of the total at 2, 4, 6, 8 and 10 days, respectively. The amount of gonyautoxin-1 (GTX1) accumulated in oysters increased linearly and slowly for 8 days and the maximum content of GTX1 reached 51.3 mol%. The composition of GTX group compounds recovered from the seawater in which the oysters had been reared was a little different from that within the oyster tissues.     

Precise metabolic flux analysis of coryneform bacteria by gas chromatography-mass spectrometry and verification by nuclear magnetic resonance

Precise metabolic flux analysis (MFA) by gas chromatography-mass spectrometry (GC-MS) and computer calculation was performed, and the consistency of the estimated results was verified by independently performed nuclear magnetic resonance (NMR) analysis. The precise estimation of flux by the integration method of the mass isotopomer signal, defined as the coefficient of variance (CV) of multiple determination, was investigated, and the results estimated using different data sets with the same magnitude of error were confirmed. The CV of multiple determinations was sufficiently small to discuss and compare the fluxes of a metabolic pathway. The estimated fluxes using the GC-MS data were cross-validated with the NMR data that were independently measured and not used for MFA. The developed method was successfully applied to the MFA of the growth phase of two different glutamate-producing coryneform bacteria, Corynebacterium glutamicum and C. efficiens. The difference in the growth rate between these two bacterial species was discussed while considering the results of MFA, including forward and backward (exchange) fluxes.     

LES analysis of flow and turbulent mixing in an unsteady jet

The flow and mixing process of unsteady jets are fundamentally analyzed by large eddy simulations. The effects of nozzle velocity and turbulence intensity on the turbulent eddy structure and mixing process between the nozzle fluid and ambient fluid were investigated. The results show that a toroidal‐shaped vortex, which emerges around the jet tip, primarily accelerates the entraining flow. Also, increasing the turbulence intensity in the nozzle encourages mixing in the jet without changing the jet‐contour. Furthermore, when the rise‐up time of the initial nozzle velocity is elongated, turbulent mixing is suppressed. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(5): 303–313, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20158     

Polymer-electrolyte water electrolysis

The electricity for the electrolyzer is supplied by a variable electricity supply unit that simulates actual outputs of both series and parallel combinations of solar cells exposed to various solar intensities. An amorphous-silicon solar cell is used as a sensor for the unit The operation was continued for more than 600 days without trouble. The case of direct connection of the solar cell and polymer electrolyte (PE) water electrolyzer is simulated: the test results show that more than 95% of the peak electricity power of the solar battery can be utilized for the electrolyzer over various solar radiation conditions.     

Efficient power coupling using taper-ended multimode optical fibres

Highly efficient power coupling of up to 97% between a d.h. laser and a multimode step-index fibre is demonstrated by employing a tapered fibre launcher. Also, it is shown theoretically that a tapered end increases the effective numerical aperture of a fibre. For a Lambertian emitter, the use of a taper launcher permits the maximum coupling efficiency allowed by the Liouville theorem.     

Exploiting Temporal Relations in Mining Hepatitis Data

Various data mining methods have been developed last few years for hepatitis study using a large temporal and relational database given to the research community. In this work we introduce a novel temporal abstraction method to this study by detecting and exploiting temporal patterns and relations between events in viral hepatitis such as “event A slightly happened before event B and B simultaneously ended with event C”. We developed algorithms to first detect significant temporal patterns in temporal sequences and then to identify temporal relations between these temporal patterns. Many findings by data mining methods applied to transactions/graphs of temporal relations shown to be significant by physician evaluation and matching with published in Medline.     

Observation of multiple stroke and multipoint discharges by means of UHF interference

Results of interferometric observations of cloud‐to‐ground flashes in Darwin (Australia) have been analyzed to investigate some features of the lightning phenomenon. Our study focused on comparison between multipoint and multiple negative cloud‐to‐ground flashes. The speed of leaders was estimated with submillisecond resolution for both multipoint and multiple strokes. Leaders preceding the first stroke in multiple‐stroke flashes progress in a stepped fashion, and their behavior exhibits the same features as leaders in multipoint flashes. The estimated average speed of the leaders is on the order of 10⁵ m/s, and the mean step length is found to be 96 m with a mean pause time of 73 μs. The running time of the leader found from results of these observations has a mean value of 89 μs. The duration of UHF radiation bursts generated by leaders propagating along previously formed channels ranges from 0.2 to 55.3 ms with a mean value of 7.5 ms. By contrast, the duration of UHF radiation in leaders preceding multipoint strokes ranges from 21.1 to 90.6 ms with a mean value of 47.5 ms. The time intervals between strokes that strike at the same point as the previous stroke range from 22.5 to 330.6 ms with a mean value of 75.1 ms, while intervals between strokes in multipoint flashes range from 55.6 to 633.7 ms with a mean value of 149.1 ms. All leaders preceding multipoint strokes start in the same region inside the cloud. © 2001 Scripta Technica, Electr Eng Jpn, 134(4): 62–69, 2001     

Development of radiochromic dosimeters based on polymer films with fluoran and divinyl phthalide dyes

Journal of Materials Science: Materials in Electronics - We fabricated polyvinyl chloride (PVC) and poly(methyl methacrylate) (PMMA) films containing NIR Black78, Black100 and Black400 for use as...     

Studies on chitin. IX. Crosslinking of water-soluble chitin and evaluation of the products as adsorbents for cupric ion

Water-soluble chitin was successfully crosslinked to varying extents with glutaraldehyde in homogeneous aqueous solutions to improve the properties as an adsorbent for metal cations, and the effects of crosslinking were discussed. Complete insolubilization was achieved with the fivefold excess aldehyde, but, in terms of adsorptivity of Cu²⁺, the chitin crosslinked at an aldehyde/amino group ratio of 1.0 was found to exhibit remarkable capacity and was much superior to others. The desorption of Cu²⁺ from the adsorption complex was also attained effectively at pH 2.0. These results indicated that the loose crosslinking was quite simple and efficient to produce high capacity adsorbents for practical use. Thermal behavior of the crosslinked chitin was examined by TMA and TGA; a softening phenomenon was observed at 145°C.