Single SOC Test Challenge for Blu-ray DVD

<正>The Blu-ray DVD single chip SOC architecture, challenging high speed and high fidelity mixed signal test requirements and test solutions are introduced. COT reductions to make this a mass production low cost test approach is also described.     

Theoretical analysis of view interpolation with inaccurate depth information

A problem of view interpolation from a pair of rectified stereo images with inaccurate depth information is addressed. Errors in geometric information greatly affect the quality of the resulting images since inaccurate geometry causes miscorrespondences between the input images. A new theory for quantitatively analyzing the effect of depth errors and providing a principled optimization scheme based on the mean-squared error metric is proposed. The theory clarifies that, if the probabilistic distribution of the depth errors is given, an optimized view-interpolation scheme that outperforms conventional linear interpolation can be derived. It also reveals that, under specific conditions, linear interpolation is acceptable as an approximation of the optimized-interpolation scheme. Furthermore, band limitation combined with linear interpolation is also analyzed, leading to an optimal cutoff frequency, which achieves better results than the antialias scheme proposed in previous studies. Experimental results using real scenes are also presented to confirm this theory.     

Construction of an insertion marker collection of Sz. japonicus (IMACS) for genetic mapping and a fosmid library covering its genome

Measuring relative genetic distances is one of the best ways to locate genetic loci. Here we report the construction of a strains set for genetic mapping in Schizosaccharomyces japonicus, which belongs to the genus Schizosaccharomyces together with the well‐studied fission yeast Sz. pombe. We constructed 29 strains that bear a positive‐negative selection marker at different loci. The marker was inserted every 500 kb in the genome of Sz. japonicus. Each marker thus becomes a ‘scale mark’ of a chromosome that behaves like a yardstick. By determining the genetic distances from the inserted markers, the relative location of a genomic mutation can be determined. We also constructed a fosmid library that covers an entire genome of Sz. japonicus. These tools together would facilitate identification and cloning of the gene. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of the relationship between citation frequency of patents and diversity of their backward citations for Japanese patents

Conventional patent citation analyses have focused mainly on the presence of citation relationships, the number of patents cited by the subject patent, and the number of times the subject patent is cited by others (i.e., the numbers of backward and forward citations of the subject patent). However, most of them have not focused on patent classifications. Assuming that a patent based on a variety of technological bases tends to be an important patent that is cited more often, this study examines and clarifies the relationship between the diversity of classifications assigned to backward citations and the number of forward citations for Japanese patents. The results show notable differences in the number of classifications assigned to backward citations between the often cited and less frequently cited groups. It is considered that the diversity of backward citations can be utilized in the evaluation criteria for grouping that roughly identifies the often cited patents or eliminates a large part of less frequently cited patents.     

Induced absorption in X-ray-irradiated CdS- and CdSSe-doped glasses

Optical transmission spectra of X-ray-irradiated CdS- and CdSSe-doped glasses and undoped glass have been measured. Induced absorption has been observed in these glasses. In addition to the radiation-induced absorption increment, decrease in absorption has been observed near absorption edge in CdSSe-doped glasses. Origin of the decrease in absorption was examined.     

Thermal and electrochemical durability of carbonaceous composites used as a bipolar plate of proton exchange membrane fuel cell

Thermal and electrochemical durability of carbonaceous composite plates, which are made from graphite powders and a resin for use as bipolar plates of PEMFC (proton exchange membrane fuel cell), were investigated. The thermal durability was investigated by TG (thermal gravimetry) coupled with DTA (differential thermal analysis) technique under air up to 600 °C. A weight loss was significant over 300 °C, but the hydrophobicity was decreased after heated at 80 °C for 192 h.The electrochemical durability was investigated in 10 μmol dm⁻³ of hydrochloric acid solution under nitrogen or oxygen atmosphere by means of potential holding test from 0.8 to 1.5 V against RHE (reversible hydrogen electrode) at 80 °C. During the potential holding tests, CO₂ production due to the corrosion was quantified by a GC (gas-chromatography) and the production was detectable above 1.3 V irrespective with atmosphere; on the other hand, it was clarified from the contact angle measurements that the hydrophobicity was changed below 1.3 V. The results of this study showed that the carbonaceous composite plates were electrochemically degraded under PEMFC condition and were seriously degraded in URFC (unitized regenerative fuel cell) condition.     

AMON: a wearable multiparameter medical monitoring and alert system

This paper describes an advanced care and alert portable telemedical monitor (AMON), a wearable medical monitoring and alert system targeting high-risk cardiac/respiratory patients. The system includes continuous collection and evaluation of multiple vital signs, intelligent multiparameter medical emergency detection, and a cellular connection to a medical center. By integrating the whole system in an unobtrusive, wrist-worn enclosure and applying aggressive low-power design techniques, continuous long-term monitoring can be performed without interfering with the patients' everyday activities and without restricting their mobility. In the first two and a half years of this EU IST sponsored project, the AMON consortium has designed, implemented, and tested the described wrist-worn device, a communication link, and a comprehensive medical center software package. The performance of the system has been validated by a medical study with a set of 33 subjects. The paper describes the main concepts behind the AMON system and presents details of the individual subsystems and solutions as well as the results of the medical validation.     

Seismic performance of group pile foundation with ground improvement during liquefaction

A pile foundation with ground improvement under the footing is a composite foundation with the objectives of enhancing the seismic performance and rationalizing the substructure by combining the pile foundation with ground improvement. Although the effectiveness of this method has been confirmed in previous studies for application to soft grounds, the applicability of this method to liquefiable grounds has yet to be fully investigated. In this study, therefore, centrifuge model tests and finite element analyses were conducted to clarify the effectiveness of this method and to ascertain the improvement in strength (stiffness) when the method is applied to a liquefiable ground. Firstly, in order to investigate the effect of an improved ground on the behavior of the pile foundation during liquefaction, dynamic centrifuge model tests were conducted for three cases with different strengths of the improved ground. Then, three-dimensional soil–water coupled finite element analyses of the centrifuge model experiments were performed to validate the applicability of the analytical method. After that, parametric studies, in which the strength of the improved ground and the input ground motion were changed, were conducted using the same analytical model. The results confirmed that the horizontal displacement of the pile heads was reduced by the improved ground even in the liquefiable ground, and that the effect of this reduction was more remarkable in cases of high stiffness of the improved ground. Furthermore, it was possible to reduce the bending moments at the pile heads by applying the ground improvement. However, since the bending moment at the boundary between the improved ground and the natural ground became the local maximum, there was an optimum stiffness of the ground improvement at which the maximum bending moment of the piles was reduced. This is because improving the ground around the pile heads has the same effect as extending the footing. It was thus concluded that the behavior of the pile foundation is similar to that of a composite foundation comprised of a caisson and group piles.