Amplification of tunable, picosecond pulses from a single-mode, short cavity dye laser

The design and performance of an Nd⁺³:YAG pumped, short cavity dye laser-dye amplifier system is reported. This system produces narrow bandwidth, broadly tunable picosecond pulses with energies in the millijoule range.     

Simulation,assessment and technical conclusions from a major accident investigation

This paper is the third in a series which describes and discusses the scientific and technical analysis used to assist the investigation of a major accident involving a Royal Australian Navy helicopter. This particular investigation was a particularly complex one that required transportation of the wreckage from the crash site in Indonesia, at the end of the on-site investigation, to laboratories in Australia for detailed assessment. This paper describes the simulations used to assist the investigation, and the technical conclusions reached about the loss of control of the aircraft. Finally the paper outlines the sequence of events which occurred during the accident, and discusses some key issues involved in the formal investigative processes associated with the Board of Inquiry, and the lessons learned in the process.     

Reduction of Listeria monocytogenes on frankfurters treated with lactic acid solutions of various temperatures

United States regulations require ready-to-eat meat and poultry processors to control Listeria monocytogenes using interventions which may include antimicrobials that reduce post-processing contamination by at least 1 log-cycle; if the treatment achieves ≥2 log reductions, the plant is subject to less frequent microbial testing. Lactic acid (LA) may be useful as a post-lethality intervention and its antimicrobial properties may increase with temperature of application. The aim of this study was to evaluate the effect of LA solution concentration and temperature on L. monocytogenes counts of inoculated frankfurters and to identify parameters (concentration, temperature, and time) that achieve 1 and 2 log-unit immediate reductions. Frankfurters were surface-inoculated with a 10-strain mixture of L. monocytogenes (4.4 ± 0.1 log CFU/cm²) and then immersed in distilled water or LA solutions (0–3%) of 4, 25, 40, or 55 °C for 0–120 s. A regression equation for L. monocytogenes reduction included significant (P < 0.05) effects by the terms of concentration, time, temperature, and the interaction of concentration and temperature; other tested parameters (other interactions, quadratic and cubic terms), within the experimental range examined, did not affect (P ≥ 0.05) the extent of reduction. Results indicated that the effectiveness of LA against L. monocytogenes, in addition to concentration, increased with solution temperature (in the range of 0.6–2.8 log CFU/cm²). The developed equation may allow processors to vary conditions of treatment with LA to achieve a 1 or 2 log-unit reduction of the pathogen and comply with United States regulations.     

Effects of cooking methods and chemical tenderizers on survival of Escherichia coli O157:H7 in ground beef patties

This study evaluated chemical tenderizers and cooking methods to inactivate Escherichia coli O157:H7 in ground beef patties (model system for non-intact beef). Ground beef was inoculated with E. coli O157:H7 and mixed with (i) nothing (control), (ii) calcium chloride (CC) and flavoring agents (FA), (iii) CC, FA, and acetic acid (AA), (iv) sodium chloride (SC), sodium tripolyphosphate (ST), and potassium lactate (PL), and (v) the combination of SC, ST, PL, and AA. Patties were stored in aerobic or vacuum bags at − 20, 4, and 12 °C. Samples were grilled, broiled, or pan-fried to 60 or 65 °C. Total bacterial and E. coli O157:H7 populations remained unchanged during storage. Broiling was more effective in reducing E. coli O157:H7 than grilling and pan-frying, and acidified tenderizers reduced E. coli O157:H7 more than non-acidified tenderizers in broiling. Higher reductions were observed at 65 °C than 60 °C in broiled and grilled samples. These results indicate that acidified tenderizers and broiling may be useful in non-intact beef safety.     

Attachment and biofilm formation by Escherichia coli O157:H7 at different temperatures, on various food-contact surfaces encountered in beef processing

Escherichia coli O157:H7 attached to beef-contact surfaces found in beef fabrication facilities may serve as a source of cross-contamination. This study evaluated E. coli O157:H7 attachment, survival and growth on food-contact surfaces under simulated beef processing conditions. Stainless steel and high-density polyethylene surfaces (2 × 5 cm) were individually suspended into each of three substrates inoculated (6 log CFU/ml or g) with E. coli O157:H7 (rifampicin-resistant, six-strain composite) and then incubated (168 h) statically at 4 or 15 °C. The three tested soiling substrates included sterile tryptic soy broth (TSB), unsterilized beef fat-lean tissue (1:1 [wt/wt]) homogenate (10% [wt/wt] with sterile distilled water) and unsterilized ground beef. Initial adherence/attachment of E. coli O157:H7 (0.9 to 2.9 log CFU/cm²) on stainless steel and high-density polyethylene was not affected by the type of food-contact surface but was greater (p < 0.05) through ground beef. Adherent and suspended E. coli O157:H7 counts increased during storage at 15 °C (168 h) by 2.2 to 5.4 log CFU/cm² and 1.0 to 2.8 log CFU/ml or g, respectively. At 4 °C (168 h), although pathogen levels decreased slightly in the substrates, numbers of adherent cells remained constant on coupons in ground beef (2.4 to 2.5 log CFU/cm²) and increased on coupons in TSB and fat-lean tissue homogenate by 0.9 to 1.0 and 1.7 to 2.0 log CFU/cm², respectively, suggesting further cell attachment. The results of this study indicate that E. coli O157:H7 attachment to beef-contact surfaces was influenced by the type of soiling substrate and temperature. Notably, attachment occurred not only at a temperature representative of beef fabrication areas during non-production hours (15 °C), but also during cold storage (4 °C) temperatures, thus, rendering the design of more effective sanitation programs necessary.     

Optimized dairy grazing systems in the northeast United States and New Zealand. II. System analysis.

Factors that optimize milk production from Northeast United States and New Zealand grazing systems are compared using a linear programming model. The objective function maximized gross margin per hectare of land farmed. The experimental design compared the optimum characteristics of each system over a range of milk prices. The Northeast has a shorter grazing season and lower cropping costs than New Zealand. The optimum pasture area was 49% of the farm for Northeast systems. Gross margins declined rapidly above 55% or below 36% pasture area. The optimum stocking rate was 1.13 cows/ha, or 2.3 cows/ha of pasture. Optimum per cow production was higher for Northeast [7105 kg of fat-corrected milk (FCM)] than New Zealand (5710 kg of FCM) systems. This was related to lower grain relative to milk prices in the Northeast. New Zealand, all-pasture systems gave the lowest cost per unit of milk but also gave the lowest gross margin across all milk price scenarios. The best use of purchased feed in New Zealand systems was to support increased stocking rate rather than per cow production. Optimum grazing management practices were similar for supplemented New Zealand and Northeast systems. All-pasture New Zealand systems are characterized by short lactations and long autumn rotations to transfer pasture in situ for winter feeding. Higher costs per unit of milk produced will be an inevitable consequence of maximizing gross margin at high milk prices in New Zealand systems.