Mn+Sb2O3 Thermite/Intermetallic Delay Compositions

The binary Mn+Sb₂O₃ pyrotechnic composition was investigated for mining detonator time delay applications. EKVI thermodynamic modelling predicted two maxima in the adiabatic reaction temperature. The local maximum, at a manganese fuel content of ca. 36 wt‐%, corresponds to a pure thermite‐type redox reaction: 3 Mn+Sb₂O₃→3 MnO+2Sb. The overall maximum in the adiabatic reaction temperature (ca. 1640 K), at the fuel‐rich composition of 49 wt‐% Mn, is consistent with the reaction 5 Mn+Sb₂O₃→3 MnO+2 MnSb, i.e. a combination of the standard thermite with an additional exothermic intermetallic reaction. XRD analysis of combustion residues confirmed the formation of MnSb and Mn₂Sb for fuel‐rich compositions. Burn rates were measured using delay elements assembled into commercial detonators. The d₅₀ particle sizes were 23.4 and 0.92 μm for the Mn fuel and Sb₂O₃ oxidant powders, respectively. The delay elements comprised rolled lead tubes with a length of 44 mm and an outer diameter of 6.4 mm. The rolling action compacted the pyrotechnic compositions to 74 ± 2 % theoretical maximum density. The burning rate increased linearly from 4.2 to 9.4 mm s⁻¹ over the composition range 25–50 wt‐% Mn.     

Effect of primary amine hydrocarbon chain length for the selective catalytic reduction of NOx from diesel engine exhaust

The effect of increasing primary amine hydrocarbon chain length on the SCR of NO_x from diesel engine exhaust was investigated and compared to ammonia. Methylamine (CH₃NH₂), ethylamine (CH₃CH₂NH₂), propylamine (CH₃CH₂CH₂NH₂) and butylamine (CH₃CH₂CH₂CH₂NH₂) were tested using a 12 cell mini core NH₃ - SCR catalyst cut from a 400 cpsi block. There is a steady decrease in NO_x conversion as the length of the hydrocarbon chain increases (from 50% for methylamine to 26% for butylamine). For the same number of carbons in the amine, primary amines are more active reductants than methyl substituted secondary or tertiary amines. For example, ethylamine (NO_x conversion of 45%) is more active than dimethylamine (NO_x conversion of 34%).Since the amines are reactive in the gas phase in the temperature range of diesel engine exhaust, gas phase conversions were estimated by replacing the mini core SCR catalyst with an equivalent length of quartz beads. There was no smooth transition in gas phase NO and NO_x conversions with increasing hydrocarbon chain length. The results suggest a different mechanism for gas phase reactions depending on the nature of the amine.     

A solar-powered,high-efficiency hydrogen fueling system using high-pressure electrolysis of water: Design and initial results

Hydrogen for fuel-cell electric vehicles (FCEVs) was produced using clean, renewable solar energy to electrolyze water. This report describes the design, construction, and initial performance testing of a solar hydrogen fueler at the GM Proving Ground in Milford, MI. The system used high-efficiency photovoltaic (PV) modules, a high-pressure (6500 psi, 44.8 MPa) electrolyzer, and an optimized direct connection between the PV and electrolyzer systems. This resulted in world-class solar to hydrogen efficiencies as high as 9.3% (based on H₂ lower heating value, LHV). The system could potentially supply approximately 0.5 kg of hydrogen per day from solar power for the average solar insolation in Detroit; more hydrogen would be produced in locations with more abundant sunshine. This is sufficient hydrogen to operate an FCEV for an average daily urban commute. Thus, the solar hydrogen fueler testing served as a “proof of concept” for clean, renewable hydrogen with potential applications including convenient, clean, quiet, small-scale home fueling of FCEVs (that can contribute to the growth of a future FCEV fleet) and fueling in remote locations where grid electricity is not available.     

Traffic of dynamin within individual Drosophila synaptic boutons relative to compartment-specific markers

Presynaptic terminals contain several specialized compartments, which have been described by electron microscopy. We show in an identified Drosophila neuromuscular synapse that several of these compartments-synaptic vesicle clusters, presynaptic plasma membrane, presynaptic cytosol, and axonal cytoskeleton-labeled by specific reagents may be resolved from one another by laser scanning confocal microscopy. Using a panel of compartment-specific markers and Drosophila shibire(ts1) mutants to trap an intermediate stage in synaptic vesicle recycling, we have examined the localization and redistribution of dynamin within single synaptic varicosities at the larval neuromuscular junction. Our results suggest that dynamin is not a freely diffusible molecule in resting nerve terminals; rather, it appears localized to synaptic sites by association with yet uncharacterized presynaptic components. In shi(ts1) nerve terminals depleted of synaptic vesicles, dynamin is quantitatively redistributed to the plasma membrane. It is not, however, distributed uniformly over presynaptic plasmalemma; instead, fluorescence images show "hot spots" of dynamin on the plasma membrane of vesicle-depleted nerve terminals. We suggest that these dynamin-rich domains may mark the active zones for synaptic vesicle endocytosis first described at the frog neuromuscular junction.     

Neuroleptic malignant syndrome and mivacurium: a safe alternative to succinylcholine?

Neuroleptic malignant syndrome (NMS) and malignant hyperthermia (MH) may have a common pathogenic mechanism; therefore, it has been suggested that known triggering agents for MH (such as succinylcholine) should be avoided in patients with NMS. Electroconvulsive therapy (ECT) continues to play a major therapeutic role in contemporary psychiatry, and succinylcholine has been the muscle relaxant of choice in attenuating violent muscle contractions induced by ECT. Mivacurium is a non-depolarizing muscle relaxant with a relatively rapid onset and a short duration of action, and to date it has been proved safe in MH-susceptible patients. In this case report, following succinylcholine use during ECT, a patient with NMS developed an increase in temperature and serum creatine kinase (CK) level, possibly due to an MH reaction. Since the patient's mental status necessitated further ECT, mivacurium was administered during subsequent treatment and resulted in effective attenuation of muscle contractions without elevation of patient temperature or CK levels. In addition, there was no marked prolongation of the anaesthetic. Mivacurium is a suitable agent for patients with NMS undergoing ECT, as it has not been associated with precipitation of an MH response.     

Duodenal Dysbiosis and Relation to the Efficacy of Proton Pump Inhibitors in Functional Dyspepsia

Proton pump inhibitors (PPI) may improve symptoms in functional dyspepsia (FD) through duodenal eosinophil-reducing effects. However, the contribution of the microbiome to FD symptoms and its interaction with PPI remains elusive. Aseptic duodenal brushings and biopsies were performed before and after PPI intake (4 weeks Pantoprazole 40 mg daily, FD-starters and controls) or withdrawal (2 months, FD-stoppers) for 16S-rRNA sequencing. Between- and within-group changes in genera or diversity and associations with symptoms or duodenal factors were analyzed. In total, 30 controls, 28 FD-starters and 19 FD-stoppers were followed. Mucus-associated Porphyromonas was lower in FD-starters vs. controls and correlated with symptoms in FD and duodenal eosinophils in both groups, while Streptococcus correlated with eosinophils in controls. Although clinical and eosinophil-reducing effects of PPI therapy were unrelated to microbiota changes in FD-starters, increased Streptococcus was associated with duodenal PPI effects in controls and remained higher despite withdrawal of long-term PPI therapy in FD-stoppers. Thus, duodenal microbiome analysis demonstrated differential mucus-associated genera, with a potential role of Porphyromonas in FD pathophysiology. While beneficial effects of short-term PPI therapy were not associated with microbial changes in FD-starters, increased Streptococcus and its association with PPIeffects in controls suggest a role for duodenal dysbiosis after long-term PPI therapy.     

Applying direct digital control

One particular aspect of a wide range of HVAC research at the US Center for Building Technology concerned interfacing DDC with the pneumatic system for one of the existing air handling units at the CBT building itself. Using solenoid air valves induced both positive and negative air leaks in the pneumatic system; this did not occur with motorised pressure regulators, though these produced a time delay whenever the regulator's direction of rotation was reversed. Details are given of an adaptive PI algorithm with a self‐tuning regulator approach, developed at CBT and implemented on the air handler in question. From the experience, it is strongly recommended that such an algorithm should be implemented on a positional basis.     

ToF‐SIMS investigation of epoxy resin curing reaction at different resin to hardener ratios

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) and principal components analysis (PCA) were used to analyze diglycidyl ether of bisphenol A (DGEBA) and diglycidyl ether of bisphenol F (DGEBF) epoxy resin blend cured with isophorone diamine (IPD) hardener at different resin to hardener ratios. The aim was to establish correlations between the hardener concentration and the nature and progress of the crosslinking reaction. Insights into the cured resin structure revealed using ToF‐SIMS are discussed. Three sets of significant secondary ions have been identified by PCA. Secondary ions such as C₁₄H₇O⁺, CHO⁺, CH₃O⁺, and C₂₁H₂₄O₄⁺ showed variance related to the completion of the curing reaction. Relative intensities of C_xH_yN_z⁺ ions in the cured resin samples are indicative of the un‐reacted and partially reacted hardener molecules, and are found to be proportional to the resin to hardener mixing ratio. The relative ion intensities of the aliphatic hydrocarbon ions are shown to relate to the cured resin crosslinking density. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(glycolic acid) fiber-reinforced bioabsorbable composites with improved interfacial properties

Bioabsorbable composites, designed for use as rigid tissue scaffolds, were fabricated by reinforcing free radically cured poly(D,L-lactide) fumarate matrices with absorbable poly(glycolic acid) fibers. To investigate the benefits of an improved fiber/matrix interphase, fiber pretreatments were employed including surface-etching by exposure to mild acidic conditions and incorporation of 3-methacryloxypropyltrimethoxysilane as a coupling agent. SEM of composite fracture surfaces showed that fiber pretreatment yielded improved wetting and encapsulation of the fibers by the matrix resin. The composites fabricated with poly(glycolic acid) fibers which were acid-etched and pretreated with the coupling agent showed an average 41% increase in tensile strength; a representative sample displayed an increase from 73.9 MPa to 105.5 MPa, compared to the composite made from untreated fibers.