CuI and H2O2 Inactivate and FeII Inhibits [Fe]‐Hydrogenase at Very Low Concentrations

[Fe]‐Hydrogenase (Hmd) catalyzes reversible hydride transfer from H₂. It harbors an iron‐guanylylpyridinol as a cofactor with an Fe^II that is ligated to one thiolate, two COs, one acyl‐C, one pyridinol‐N, and solvent. Here, we report that Cu^I and H₂O₂ inactivate Hmd (half‐maximal rates at 1 μM Cu^I and 20 μM H₂O₂) and that Fe^II inhibits the enzyme with very high affinity (K_i=40 nM ). Infrared and EPR studies together with competitive inhibition studies with isocyanide indicated that Cu^I exerts its inhibitory effect most probably by binding to the active site iron‐thiolate ligand. Using the same methods, it was found that H₂O₂ binds to the active‐site iron at the solvent‐binding site and oxidizes Fe^II to Fe^III. Also it was shown that Fe^II reversibly binds away from the active site iron, with binding being competitive to the organic hydride acceptor; this inhibition is specific for Fe^II and is reminiscent of that for the [FeFe]‐hydrogenase second iron, which specifically interacts with H₂.     

Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Humido-sensitive conducting polymer films and applications to linear actuators

Free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) with various PSS contents were newly prepared by casting water dispersion of the PEDOT/PSS colloidal particles in the presence of an extra PSS. Electrical conductivity, morphology, water vapor sorption, and electro-active polymer actuating behavior of the resulting films were investigated by means of four-point method, atomic force microscope (AFM), sorption isotherm, and electromechanical analyses. The maximum contraction of the film by application of an electric field increased with increasing both PSS content and relative humidity (RH), where the value attained 7% at 70% RH for the film with 93% of PSS. Since the isothermal sorption curve of the film was less dependent on the PSS content, the significant increase of the film contraction was explained by two mechanisms: (i) the extra PSS prevented from hydrogen bonding between adjacent PEDOT/PSS particles that suppressed dimensional changes of the film; and (ii) the higher the RH, the larger the degree of water vapor sorption, which led to the large film contraction by desorption of water vapor via Joule heating. On the basis of this phenomenon linear actuators utilizing PEDOT/PSS films were successfully developed and applied to leverage actuator and Braille cell.     

Agglomeration Characteristics of Aluminum Particles in AP/AN Composite Propellants

Most solid rockets are powered by ammonium perchlorate (AP) composite propellant including aluminum particles. As aluminized composite propellant burns, aluminum particles agglomerate as large as above 100 μm diameter on the burning surface, which in turn affects propellant combustion characteristics. The development of composite propellants has a long history. Many studies of aluminum particle combustion have been conducted. Optical observations indicate that aluminum particles form agglomerates on the burning surface of aluminized composite propellant. They ignite on leaving the burning surface. Because the temperature gradient in the reaction zone near a burning surface influences the burning rate of a composite propellant, details of aluminum particle agglomeration, agglomerate ignition, and their effects on the temperature gradient must be investigated. In our previous studies, we measured the aluminum particle agglomerate diameter by optical observation and collecting particles. We observed particles on the burning surface, the reaction zone, and the luminous flame zone of an ammonium perchlorate (AP)/ammonium nitrate (AN) composite propellant. We confirmed that agglomeration occurred in the reaction zone and that the agglomerate diameter decreased with increasing the burning rate. In this study, observing aluminum particles in the reaction zone near the burning surface, we investigated the relation between the agglomerates and the burning rate. A decreased burning rate and increased added amount of aluminum particles caused a larger agglomerate diameter. Defining the extent of the distributed aluminum particles before they agglomerate as an agglomerate range, we found that the agglomerate range was constant irrespective of the added amount of aluminum particles. Furthermore, the agglomerate diameter was ascertained from the density of the added amount of aluminum particles in the agglomerate range. We concluded from the heat balance around the burning surface that the product of the agglomerate range and the burning rate was nearly constant irrespective of the added amount of aluminum particles. Moreover, the reduced burning rate increased the agglomerate range.     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.     

The alkylation of biphenyl over three-dimensional large pore zeolites: The influence of zeolite structure and alkylating agent on the selectivity for 4,4′-dialkylbiphenyl

Catalytic properties of three-dimensional zeolites, Y (FAU), Beta (BEA), and CIT-1 (CON) zeolites were examined in the alkylation, isopropylation, sec-butylation, and tert-butylation, of biphenyl (BP), and compared to those of H-mordenite (MOR). The selectivities for 4,4′-dialkylbiphenyl (4,4′-DABP) varied with the types of zeolite and of alkylating agent. FAU, BEA, and CON gave only low selectivities for 4,4′-diisopropylbiphenyl (4,4′-DIPB) in the isopropylation, and predominant isomers were bulky and thermodynamically unstable 2,x′-DIPB (2,2′-, 2,3′-, and 2,4′-) at lower temperatures, and bulky and thermodynamically stable 3,4′- and 3,3′-DIPB at higher temperatures: this is quite different from catalytic features over MOR, which gave 4,4′-DIPB with high selectivities at moderate temperatures. These results suggest that FAU, BEA, and CON have no shape-selective nature in the isopropylation, and that the reaction is principally controlled kinetically at lower temperatures, and thermodynamically at higher temperatures. The sec-butylation gave similar results to the isopropylation. Although the selectivities for 4,4′-di-sec-butylbiphenyl (4,4′-DSBB) were higher than those in the isopropylation, predominant isomers were 2,x′-DSBB (2,2′-, 2,3′-, and 2,4′-) at lower temperatures, and 3,4′- and 3,3′-DSBB at higher temperatures. The tert-butylation gave 4,4′-di-tert-butylbiphenyl (4,4′-DTBB) in moderate to high selectivities over all zeolites at moderate temperatures: the selectivity for 4,4′-DTBB was higher than 80% over BEA and CON; however, it still remained at 50% over FAU. FAU channels with super cages are too large for selective formation of 4,4′-DTBB.

From these results, it is concluded that the selectivity for 4,4′-DABP in the alkylation over MOR, FAU, BEA, and CON is determined by the exclusion of bulky isomers at their transition states, and that the exclusion is caused by the steric restriction at the transition states of bulky isomers by the zeolite channels.     

Adsorption of cationic monomeric and gemini surfactants on montmorillonite and adsolubilization of vitamin E

Adsorption of a cationic gemini surfactant (1,2-bis(dodecyldimethylammonio) ethane dibromide, 12-2-12) and the corresponding monomeric surfactant (dodecyltrimethylammonium bromide, DTAB) on montmorillonite has been characterized with a combination of adsorption isotherm, interlayer spacing and FT-IR spectroscopic data. Adsolubilization of vitamin E into the adsorbed surfactant layers has also been studied. The adsorption isotherm data reveal that the adsorption of the two surfactants is driven by the two factors: one is the cation exchange that occurs on the interlayer basal planes and the other is the hydrophobic interaction between hydrocarbon chains of the surfactants. Although the adsorbed amount measured in the saturation region (in mol g(-1)) is almost identical for the two surfactants, the conformation of the intercalated surfactant molecules differs significantly from each other. The adsorption of DTAB results in a lateral bilayer arrangement in the limited interlayer space, whereas 12-2-12 gives a normal bilayer arrangement in the expanded interlayer space. Adsolubilization of vitamin E takes place into the adsorbed surfactant layers, and interestingly, all the vitamin E molecules added in the montmorillonite suspensions are hybridized at lower surfactant concentrations due to the great specific surface area of the clay material. Since the maximum adsolubilization amount is usually obtained just below the critical micelle concentration, the gemini surfactant is deemed to be more efficient than the corresponding monomeric one to achieve the great adsolubilization amount.     

The micro-nanoformability of Pt-based metallic glass and the nanoforming of three-dimensional structures

Pt_48.75Pd_9.75Cu_19.5P₂₂ amorphous alloy exhibits obvious glass transition behavior at a temperature of T_g=502 K, which is below the crystallization temperature T_x=588 K, and develops a supercooled liquid state in a wide temperature range of ΔT_x (=T_x−T_g)=86 K. The present paper investigates the macroscopic and microscopic deformation behavior of the material and the possibility of micro-nano forming as a fabrication method and material for nano-devices. On a macroscopic scale, the material exhibits a Newtonian viscous flow in a supercooled liquid state. An index of the microformability is also evaluated by the geometrical transferability of a die shape to the material. For this study, we fabricated V-grooved micro dies of (100) Si by a silicon process. The V-groove dies are from 100 nm to 1 μm wide. The material exhibits superior formability on micrometer and nanometer scales and may possibly be applied to micro-nanomaterials for micro-nano devices.     

Fin efficiency of serrated fins. Part 4. Correction factor for inline arrangement

A correction factor to the theoretical fin efficiency of serrated fins, reported in Part 1 and Part 2 of this report, was derived for an inline arrangement experimentally. The experiment was performed using an open‐type wind tunnel with six kinds of test finned‐tubes made of copper, carbon steel and stainless steel, which were arranged in one to five rows. Heat transfer measurement was done by the local thermal simulation method. The derived correction factor for the 1st row was the same as for staggered arrangement reported in Part 3, for the 2nd and deeper rows, however, a further correction was needed, which may be caused by the difference in the nonuniformity in heat transfer coefficient over the fin surface. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(4): 258–269, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20008     

Chiral alkylated poly(m-phenylene)s: Optical activity and thermal stability of helical structures

Chiral poly[4,6-bis(alkylthio)-1,3-phenylene-alt-2-methyl-1,3-phenylene] was synthesized from 1,3-dibromo-2,6-bis(3-dodecyl-2-methylthio)benzene and 2-methyl-1,3-phenylenebis(pinacol borate) as a precursor of chiral poly(thiaheterohelicene). Circular dichroism (CD) spectra that arise from the poly(1,3-phenylene) backbone inverted according to the chirality of the side chains, which indicated that a helical conformation of the polymer was induced by the interaction between the side chains. The CD intensity of the polymer increased in non-polar solvents such as hexane. The decrease in the molar CD intensity and the broadening of a fluorescence band at higher concentrations suggested that the aggregation of the polymer suppressed the formation of the helical structure. The conformational changes were monitored by the CD and the ¹H NMR spectra at different temperatures. In a good solvent such as dichloromethane, the CD intensity increased, and the ¹H NMR signal of benzene protons shifted to lower fields at low temperatures. In hexane, the CD spectra and the ¹H NMR signals were less dependent on temperatures, as a result of the strong interaction between the chiral alkyl chains in the polymer to freeze the helical conformation.