Computational Methods for Parachute Fluid–Structure Interactions

The computational challenges posed by fluid–structure interaction (FSI) modeling of parachutes include the lightness of the parachute canopy compared to the air masses involved in the parachute dynamics, in the case of “ringsail” parachutes the geometric complexities created by the construction of the canopy from “rings” and “sails” with hundreds of ring “gaps” and sail “slits”, and in the case of parachute clusters the contact between the parachutes. The Team for Advanced Flow Simulation and Modeling () has successfully addressed these computational challenges with the Stabilized Space–Time FSI (SSTFSI) technique, which was developed and improved over the years by the and serves as the core numerical technology, and a number of special techniques developed in conjunction with the SSTFSI technique. The quasi-direct and direct coupling techniques developed by the , which are applicable to cases with incompatible fluid and structure meshes at the interface, yield more robust algorithms for FSI computations where the structure is light and therefore more sensitive to the variations in the fluid dynamics forces. The special technique used in dealing with the geometric complexities of the rings and sails is the Homogenized Modeling of Geometric Porosity, which was developed and improved in recent years by the . The Surface-Edge-Node Contact Tracking (SENCT) technique was introduced by the as a contact algorithm where the objective is to prevent the structural surfaces from coming closer than a minimum distance in an FSI computation. The recently-introduced conservative version of the SENCT technique is more robust and is now an essential technology in the parachute cluster computations carried out by the . We provide an overview of the core and special techniques developed by the , present single-parachute FSI computations carried out for design-parameter studies, and report FSI computation and dynamical analysis of two-parachute clusters.     

Gas chromatographic separation of wax esters based on the degree of unsaturation

The wax esters of sperm whale head oil have been characterized by gas-liquid chromatography on an APOLAR 10C column according to their carbon number and number of double bonds. The novel technique permits the direct quantitative analysis of saturated and unsaturated wax esters.     

Formation of jennite from fumed silica

Hydrothermal reactions of fumed silica with lime at 80°C were studied at starting Ca/Si of 0.8–2.0 and water/solid ratio of 20 by weight under periods of reaction time from 10 to 100 days.In the early ages of reaction, CSH having weak and diffuse basal reflections between 10–15Å was formed. On prolonging the reaction, CSH from the starting Ca/Si of 1.2–1.5 crystallised to jennite, and that from the starting Ca/Si of 0.9 to 14Å tobermorite.Lattice parameters were determined on the well crystalline jennite obtained by the reaction for 100 days at the starting Ca/Si of 1.4; i.e. a_o 10.59, b_o 7.21, c_o 10.82Å, α 99.60°, β 97.78°, γ 109.85°. Its crystals were lath-like elongated parallel to b with (001) cleavage.It was confirmed that the synthetic jennite was converted to meta-jennite by losing a part of its water on heating in air at 90°C. At higher temperatures it became poorly crystalline, and then crystallised to β-CaSiO₃ and β-Ca₂SiO₄ at 800°C.     

高速气流冲击式粉体表面改性装置——HYBRIDIZATION系统及应用

利用高速气流冲击法进行粉体/粉体系表面改性技术,是迄今为止各种粉体材料开发中最为引人注目的技术之一。HYBRIDIZATION(下称HYB)系统是利用高速气流冲击法对微粉体进行干式/机械化处理,是使材料复合化的最实用的装置,可对各类有机物、无机物、金属等进行广泛组合,通用性很强,适用于许多行业领域。从本文所述的系统构成、型式,有关的典型球形化处理的运转特性,利用复合化高温粉体测定被处理粉体表面温度,利用颜料改变色调等的处理特点及该系统的适用性等(一部分是从已发表的学术论文及专利上摘录的),可以说明HYB系统的概况。     

PTCR Characteristics in Barium Titanate Ceramics with Curie Points Between 60° and 360°C

PTCR characteristics in porous semiconducting barium titanate ceramics with Curie points from 60° to 360°C were investigated. The magnitude of the PTCR effect in these cerumics decreases self-onsistently with increasing Curie point within this temperature range. A PTCR efSect of more than 4 orders of magnitude was ahserved, for a Ba_0.44Pb_0.6TiO₃ ceramic with a Curie point of 360°C .     

Gas absorption in laminar falling films of pseudoplastic liquids

Gas absorption into laminar falling films of power-law liquids was studied theoretically and experimentally. The convective-diffusion equation was solved by the method of separation of variables and the analytical solution for the average Sherwood number was obtained as a function of the Graetz number and the power-law index of the liquid. Experiments were carried out on the absorption of pure carbon dioxide, hydrogen and helium into aqueous kaolin slurries by using a long wetted-wall column and the average absorption rates were measured as a function of the mass flow rate of the liquid. The experimental results were in good agreement with the theoretical predictions.     

Functional monomers and polymers, 64. Synthesis of poly-β-alanine from β-alanine, β-alanyl-β-alanine,and β-alanyl-β-alanyl-β-alanine 4-dodecanoyl-2-nitrophenyl esters

Active 4-dodecanoyl-2-nitrophenyl esters of β-alanine, β-alanyl-β-alanine, and β-alanyl-β-alanyl-β-alanine were prepared, and tried to polymerize in various solvents. Nonpolar solvents were found to be convenient for the polycondensation reaction. The yield of the polycondensation was high for the monopeptide ester, and less for the dipeptide and tripeptide esters. The effect of temperature on the polycondensation reaction was also studied.     

Interactional Order and Constructed Ways of Seeing with Touchless Imaging Systems in Surgery

While surgical practices are increasingly reliant on a range of digital imaging technologies, the ability for clinicians to interact and manipulate these digital representations in the operating theatre using traditional touch based interaction devices is constrained by the need to maintain sterility. To overcome these concerns with sterility, a number of researchers are have been developing ways of enabling interaction in the operating theatre using touchless interaction techniques such as gesture and voice to allow clinicians control of the systems. While there have been important technical strides in the area, there has been little in the way of understanding the use of these touchless systems in practice. With this in mind we present a touchless system developed for use during vascular surgery. We deployed the system in the endovascular suite of a large hospital for use in the context of real procedures. We present findings from a study of the system in use focusing on how, with touchless interaction, the visual resources were embedded and made meaningful in the collaborative practices of surgery. In particular we discuss the importance of direct and dynamic control of the images by the clinicians in the context of talk and in the context of other artefact use as well as the work performed by members of the clinical team to make themselves sensable by the system. We discuss the broader implications of these findings for how we think about the design, evaluation and use of these systems.     

Preparation of poly(p-phenylene terephthalamide)/poly(vinyl chloride) molecular composite and its thermal and mechanical properties

Poly(p-phenylene terephthalamide) (PPTA) was blended with poly(vinyl chloride) (PVC) by solution-blending method. PPTA was metalated for dissolving in dimethyl sulfoxide. Dimethyl sulfoxide was used as a common solvent. In PPTA/PVC composite, PPTA accelerated the thermal degradation of PVC. PPTA molecules are aggregated as microfibrillar form in PVC matrix. Such microfibrils are dispersed homogeneously in PVC matrix, according to polarizing microscopic observation. The average diameter of the microfibrils becomes smaller in the composite with lower content of PPTA. In the surface region of PPTA microfibrils the intermolecular hydrogen bonds between C? Cl of PVC and N? H of PPTA are formed. Young's modulus and the yield stress at room temperature were higher in the composites than those in PVC. The modulus of the composites was higher, especially at the high temperatures above their glass transition temperatures, than that in PVC. The temperature dependence of modulus can be calculated by using the mechanical model equivalent to the quasi-3-dimensional microfibrillar model which will be approximately applied to the composite structure. It becomes apparent that the modulus of the PPTA microfibrils evaluated by using the mechanical model is higher in the higher molecular weight PPTA.     

An X-ray photoelectron spectroscopic study of electrocatalytic activity of platinum group metals for chlorine evolution

A correlation of the catalytic activity for anodic chlorine evolution of platinum group metals to the nature of the surface film formed during chlorine evolution in a sodium chloride solution was studied by X-ray photoelectron spectroscopy. The change in the surface film with increasing potential was found on platinum, including an increase in the cationic valence. This seemed responsible for the decrease in the activity for chlorine evolution on platinum in the high potential region. Increasing potential did not result in the appreciable increase in the cationic valence in the surface film on the other platinum group metals. Replacement of hydroxyl ions in the surface film by chloride ions became easier in the order of rhodium, iridium and palladium, and the activity for anodic chlorine evolution increased in this order due possibly to an increase in the amount of chloride ions in the film which seemed to be one of the reactants in the rate determining electrochemical desorption of adsorbed chlorine atom. Chlorine molecules adsorbed on the surface film were also found. It was assumed that the activity for anodic chlorine evolution might be low when the metal surface was covered by a large amount of molecular chlorine which was the reaction product.