Deformation characteristics of ultra-thin liquid film considering temperature and film thickness dependence of surface tension

Thermocapillary deformations of an ultra-thin liquid film caused by temperature distribution were three-dimensionally analyzed using the unsteady and linearized long wave equation considering the temperature and film thickness dependence of surface tension. The temperature and film thickness dependence equation for the surface tension of a liquid was firstly established. The temperature dependence of the surface tension was obtained experimentally using a surface tensiometer and the film thickness dependence was obtained theoretically from the corrected van der Waals pressure equation for a symmetric multilayer system. Time evolutions of depression and groove of the ultra-thin liquid film caused by local heating were obtained quantitatively.     

Trends in highly scalable crossbar-based packet switch architecture

A combined input and crosspoint queued (CICQ) switch is receiving significant attention to be the next generation high speed packet switch for its scalability; however, a multi-cabinet implementation of a combined input and crosspoint queued (CICQ) switch unavoidably introduces a large round-trip time (RTT) latency between the line cards and switch fabric, resulting a large crosspoint (CP) buffer requirement. In this paper, virtual crosspoint queues (VCQs) that significantly reduces the CP buffer requirement of the CICQ switch is investigated. The VCQs unit resides inside the switch fabric, is dynamically shared among virtual output queues (VOQ) from the same source port, and is operated at the line rate, making the implementation practical. A threshold-based exhaustive round-robin (T-ERR) arbitration is employed to reduce buffer hogging at VCQ. The T-ERR at VCQ and CP arbiters serves packets residing in a longer queue more frequently than packet residing in a shorter queue. Consequently, the T-ERR, drastically increases the throughput of the CICQ switch with small CP buffers. A multi-cabinet implementation of CICQ switch do not support multicasting traffic well since a combination of small CP buffer in the switch fabric and a large RTT latency between the line cards and switch fabric results in non-work conservation of the intra-switch link. Deployment of multicast FIFO buffer between the input buffer and CP buffer shows a promise. With its ability to achieve high throughput independent of RTT and switch port size, the integration of the VCQ architecture and T-ERR scheduler to the CICQ switch is ideal for supporting ever-increasing Internet traffic that requires higher data rate, larger switch size, and efficient multicasting.     

A simple method for testing the electromigration resistance of solders

Recently, the size of solder bump interconnects have been significantly reduced with the advent of high-density packaging, and thus the evaluation of electromigration in solder bumps has become necessary. The present paper proposes a simple method to test the electromigration resistance of Pb-free solders. One of the key points of the present method is the fabrication of a simple solder sample that can produce sufficient current density to cause electromigration. Moreover, the actual local temperature of a small area subjected to electromigration in the sample was measured by a direct method. A right-angled diamond-shaped hole was introduced in a thin film of solder using a focused-ion-beam system. A direct current was supplied to the film far from the hole, perpendicular to the diagonal of the hole. In this way, the current density was concentrated near to the corner of the hole, and the value of this was obtained through a theoretical analysis. It was noted that the steady temperature in the film along a line extending from the diagonal, remained constant, although the current density decreased gradually far from the corner. Therefore, the temperature at a position near the corner, where electromigration takes place, can easily be found by measuring the temperature far from the corner. The temperature was measured directly under current flow conditions by utilizing the chemical reagents with known melting points. Finally, by measuring the ratio of hillock volume to the time for the current supply as a measure of the atomic flux divergence due to electromigration, the corresponding resistances of some Pb-free solders to electromigration were evaluated.     

Multi-contact vertical ladder climbing with an HRP-2 humanoid

We describe the research and the integration methods we developed to make the HRP-2 humanoid robot climb vertical industrial-norm ladders. We use our multi-contact planner and multi-objective closed-loop control formulated as a QP (quadratic program). First, a set of contacts to climb the ladder is planned off-line (automatically or by the user). These contacts are provided as an input for a finite state machine. The latter builds supplementary tasks that account for geometric uncertainties and specific grasps procedures to be added to the QP controller. The latter provides instant desired states in terms of joint accelerations and contact forces to be tracked by the embedded low-level motor controllers. Our trials revealed that hardware changes are necessary, and parts of software must be made more robust. Yet, we confirmed that HRP-2 has the kinematic and power capabilities to climb real industrial ladders, such as those found in nuclear power plants and large scale manufacturing factories (e.g. aircraft, shipyard) and construction sites.     

Molecular dynamics simulations of diffusion of submonolayer polar liquid lubricant films on solid surfaces

A fundamental understanding of the diffusion phenomena of submonolayer polar liquid films is important for achieving reliable lubrication between moving mechanical parts separated by a nanometer-sized gap. To acquire this understanding, we conducted molecular dynamics (MD) simulations of diffusion phenomena of submonolayer polar perfluoropolyether (PFPE) Zdol films on solid surfaces. To improve the accuracy of these simulations, we developed an all-atom model that includes hydrogen-bond potential and refined atomic charges for Zdol molecules and tested it through MD simulations of spreading of step-shaped submonolayer PFPE films. Our MD simulations reproduced the experimentally observed effects of polar end groups on the diffusion speed and molecular conformation of Zdol. We then conducted MD simulations of self-diffusion of submonolayer Zdol films; these simulations demonstrated that as the thickness of the submonolayer Zdol films decreases, molecular conformation becomes flatter and the self-diffusion coefficient decreases. These changes in molecular conformation partially explain our experimental finding that the spreading of step-shaped submonolayer polar PFPE films slows down with decreasing initial thickness.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.     

Tabu search for scheduling on identical parallel machines to minimize mean tardiness

This paper presents a tabu search approach for scheduling jobs on identical parallel machines with the objective of minimizing the mean tardiness. Initially, we consider a basic tabu search that uses short term memory only. Local search is performed on a neighborhood defined by two types of moves. Insert moves consist of transferring each job from one machine to another and swap moves are those obtained by exchanging each pair of jobs between two machines. Next, we analyze the incorporation of two diversification strategies with the aim of exploring unvisited regions of the solution space. The first strategy uses long term memory to store the frequency of the moves executed throughout the search and the second makes use of influential moves. Computational tests are performed on problems with up to 10 machines and 150 jobs. The heuristic performance is evaluated through a lower bound given by Lagrangean relaxation. A comparison is also made with respect to the best constructive heuristic reported in the literature.     

Design of a memory‐based prefilter supplementing a robust PID control system

For systems with uncertainties, lots of PID parameter tuning methods have been proposed from the view point of the robust stability theory. However, the control performance becomes conservative using robust PID controllers. In this paper, a new two‐degree‐of‐freedom (2DOF) controller, which can improve the tracking properties, is proposed for nonlinear systems. According to the proposed method, the prefilter is designed as the PD compensator whose control parameters are tuned by the idea of a memory‐based modeling (MBM) method. Since the MBM method is a type of local modeling methods for nonlinear systems, PD parameters can be tuned adequately in an online manner corresponding to nonlinear properties. Finally, the effectiveness of the newly proposed control scheme is numerically evaluated on a simulation example. Copyright © 2008 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society