Aperiodic array consisting of subarrays for use in small mobile Earth stations

A simple yet practical method of designing an aperiodic array consisting of subarrays is shown. By properly controlling the excitation phase of each subarray, the designed aperiodic array has the capability to track a geostationary satellite within some limited angles. Starting with an initial position of the subarrays, their optimum positions in terms of the side lobe performance can be obtained by a newly developed algorithm which uses the steepest descent method together with an appropriately defined cost function. An example of an aperiodic array consisting of 16 subarrays in the 14 GHz band is shown. It can track a geostationary satellite at the maximum of 2/spl deg/ off its mechanical boresight (the direction perpendicular to the surface of the array). Although it is nearly square with the maximum dimension of only 47/spl lambda/ (wavelength), its calculated side lobe patterns satisfy most of the requirements specified in the International Telecommunication Union (ITU) recommendations, which must be met by all earth stations with antennas of larger than 50/spl lambda/ in diameter.     

Monte Carlo simulation of diffusive-to-ballistic transition in phonon transport

Heat conduction properties in Si nanostructures are analyzed using a Monte Carlo method developed for solving the phonon Boltzmann transport equation. The thermal resistances are evaluated for the systems with various sizes, and the transition from the diffusive to the ballistic heat conduction are investigated. We compare the two different phonon dispersion models (the realistic dispersion relation based on the adiabatic bond charge model and the analytically approximated model), and it is shown that the correct implementation of the phonon dispersion relation is essential to accurately simulate the quasi-ballistic heat conduction properties, which becomes obvious in the structures smaller than the phonon mean free path.     

Experimental study of several types of ground heat exchanger using a steel pile foundation

An experimental study of several types of ground heat exchangers (GHEs) installed in a steel pile foundation, including double-tube, U-tube, and multi-tube GHEs, was carried out at Saga University. Water flows through the heat exchangers and exchanges heat to or from the ground. The performance of GHEs was investigated under actual operation in the cooling mode with flow rates of 2, 4, and 8 l/min. Temperatures of the ground and GHE tube wall were measured to find the temperature distributions according to the depth of the ground and depth of the GHE tube wall. The temperatures of the inlet and outlet of circulated water were also measured to calculate the heat exchange rate. The double-tube had the highest heat exchange rate, followed by the multi-tube and U-tube GHEs. For example, the average heat exchange rate of GHEs over 24 h of continuous operation with a flow rate of 4 l/min was 49.6 W/m for the double-tube, 34.8 W/m for the multi-tube, and 30.4 W/m for the U-tube. An increasing flow rate increased the heat exchange rate of the GHEs. The heat exchange rates increased significantly for flow rate increases from 2 to 4 l/min, but only slightly changed from 4 to 8 l/min.     

Vitamin K2 selectively induces apoptosis of blastic cells in myelodysplastic syndrome: flow cytometric detection of apoptotic cells using APO2.7 monoclonal antibody

We have previously reported that vitamin K2 (VK2) but not VK1 has a potent apoptosis-inducing effect on freshly isolated leukemia cells from patients with various types of leukemia. By multi-color flow cytometric analysis using monoclonal antibody (mAb), APO2.7, which detects mitochondrial 7A6 antigen specifically expressed by cells undergoing apoptosis, we further investigated the apoptosis-inducing effect of VK2 on minor populations of leukemic blast cells in bone marrow from patients with myelodysplastic syndrome (MDS) and overt myeloid leukemia (post-MDS AML). Limiting dilution of CD95 (anti-Fas) mAb-treated apoptotic Jurkat cells with nonapoptotic CTB-1 cells revealed that APO2.7-positive Jurkat cells were consistently detectable by flow cytometry when present at levels of at least 5% in the CTB-1 suspension. In patient samples the gating area for leukemic clone was determined using cell surface antigen-specific mAbs conjugated with either fluorescein isothionate (FITC) or phycoerythrin (PE) and subsequently the cells stained with phycoerythrin cyanine (PE-Cy5)-conjugated APO2.7 mAb were assessed within the gating area of the leukemic clone for monitoring apoptosis. Treatment of the bone marrow mononuclear cells with 3-10 microM of VK2 (menaquinone-3, -4 and -5) in vitro potently induced apoptosis of the leukemic blast cells as compared with the untreated control cells in all 15 MDS patients tested. This effect was more prominent on blastic cells than that on mature myeloid cells such as CD34-/CD33+ gated cells. In addition, VK2 performed much less effectively on CD3-positive lymphoid cells. In contrast to VK2, VK1 did not show apoptosis-inducing activity. These data suggest that VK2 may be used for treatment of patients with MDS in blastic transformation.     

Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Boron removal by titanium addition in solidification refining of silicon with Si-Al melt

In order to effectively remove B from Si for its use in solar cells, a process involving B removal by solidification refining of Si using a Si-Al melt with Ti addition was investigated. For clarifying the effect of Ti addition on B removal from the Si-Al melt, TiB₂ solubilities in Si-64.6 at. pct Al melt at 1173 K and Si-60.0 at. pct Al melt at 1273 K were determined by measuring the equilibrium concentrations of B and Ti in the presence of TiB₂ precipitates. The small solubilities of TiB₂ in the Si-Al melt indicate the effective removal of B from the Si-Al melt by Ti addition. Further, solidification experiments of Si-Al alloys containing B by Ti addition were performed, and the effect of Ti addition on the solidification refining of Si with the Si-Al melt was successfully confirmed.     

Fabrication of a polymer-coated silver hollow optical fiber with high performance

The techniques for fabricating a hollow optical fiber with an inner silver layer and a cyclic olefin polymer (COP) layer have been improved to reduce the surface roughness of these two layers. The loss spectrum was thereby drastically reduced over a wide wavelength range, from visible to near infrared. Optimization of the COP layer thickness resulted in low loss simultaneously at several key laser wavelengths. Infrared hollow fiber with low loss was developed for Er:YAG and Nd:YAG lasers. It can also deliver green and red pilot beams with low loss. Use of this fiber in therapeutic and pilot lasers should prove useful for research and development in laser medicine.     

折叠之舞

这所住宅位于日本古老的首都--京都中心传统住宅街区内,由建筑师Kentaro Takeguchi+Asako Yamamoto/ALPHAVILLE共同设计建造。由于地区性建筑规范和邻里关系的制约,住宅外部延续了日本传统木制别墅的特征,尽量低调谦和地融入外部传统街区环境之中。当夜暮降临,透过住宅临街的木质格栅散透出柔和的暖光,晕染着这个