Low temperature preparation and characterization of nanospherical anatase TiO2 and its photocatalytic activity on Congo red degradation under sunlight

Nanospherical titanium oxide with anatase structure was obtained at low temperature and normal pressure using a simple method of preparation. The dilute titanium (III) chloride solution was stirred at room temperature for several hours, and then ammonium hydroxide with hydrogen peroxide was added. A yellow gel TiO₂·xH₂O was obtained with nanodot shape and amorphous structure. Heated at 300 °C, it crystallized to pure anatase structure with nanospherical shape. The anatase particles prepared show good adsorption and photodegradation of Congo red solution under the sunlight. Materials were characterized by powder X-ray diffraction, thermal analysis, transmission electron microscope and UV spectroscopy.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...     

Microfluidic modeling and simulation of flow in membrane microreactors

We study the development of a mathematical model that describes isothermal microfluidic steady flow in a membrane microreactor, i.e., a silicon microreactor that houses a permeable membrane in one wall. The model employs the Navier-Stokes equation with appropriate boundary conditions for fluid permeation through the membrane and velocity slip at the walls to account for high Knudsen number. The model equations are solved analytically using finite Fourier transforms. The model solution is used to evaluate the effect of fluid permeation through the membrane and the Knudsen number on the velocity profile and pressure drop. For the simplified cases of no permeation and/or no slip, the derived solution is in excellent agreement with published experimental and theoretical results available in the literature. The utility of the model is illustrated by applying the results to a membrane microseparator used to separate hydrogen from the other effluents in a microreformer.     

Influence of temperature and permeate recovery on energy consumption of a reverse osmosis system

A model permits analysis of the influence of temperature on permeate recovery and energy consumption. The proposed model is based on the following assumptions: (1) membrane morphology is temperature-independent; (2) membrane rejection and other transport characteristics of membranes are position-independent; (3) specific water permeability of membranes was based on exponential dependence of viscosity vs. temperature; (4) temperature-dependence depembrane rejection is assumed to be linear. This allows for analyzing the influence of channel geometry, feed concentration, flow rate and temperature on permeate recovery and energy consumption. Calculated data are included. The solutionpresented can be segmented andbuilt into systems for comprehensive techno-economic evaluation of the RO-based process where temperature-dependence of process characteristics has to be considered.     

Development of Potent Adenosine Monophosphate Activated Protein Kinase (AMPK) Activators

Previously, we reported the identification of a thiazolidinedione‐based adenosine monophosphate activated protein kinase (AMPK) activator, compound 1 (N‐[4‐({3‐[(1‐methylcyclohexyl)methyl]‐2,4‐dioxothiazolidin‐5‐ylidene}methyl)phenyl]‐4‐nitro‐3‐(trifluoromethyl)benzenesulfonamide), which provided a proof of concept to delineate the intricate role of AMPK in regulating oncogenic signaling pathways associated with cell proliferation and epithelial–mesenchymal transition (EMT) in cancer cells. In this study, we used 1 as a scaffold to conduct lead optimization, which generated a series of derivatives. Analysis of the antiproliferative and AMPK‐activating activities of individual derivatives revealed a distinct structure–activity relationship and identified 59 (N‐(3‐nitrophenyl)‐N′‐{4‐[(3‐{[3,5‐bis(trifluoromethyl)phenyl]methyl}‐2,4‐dioxothiazolidin‐5‐ylidene)methyl]phenyl}urea) as the optimal agent. Relative to 1 , compound 59 exhibits multifold higher potency in upregulating AMPK phosphorylation in various cell lines irrespective of their liver kinase B1 (LKB1) functional status, accompanied by parallel changes in the phosphorylation/expression levels of p70S6K, Akt, Foxo3a, and EMT‐associated markers. Consistent with its predicted activity against tumors with activated Akt status, orally administered 59 was efficacious in suppressing the growth of phosphatase and tensin homologue (PTEN)‐null PC‐3 xenograft tumors in nude mice. Together, these findings suggest that 59 has clinical value in therapeutic strategies for PTEN‐negative cancer and warrants continued investigation in this regard.     

High Stable Al-MCM-41: Structural Characterization and Evaluation for Removal of Methylene Blue from Aqueous Solution

Aluminosilicate (Al-MCM-41) was synthesized via a modified wet-method in a Si/Al atomic ratio of 13.64:1.00 and calcination at 500 °C. The structural     

Synthesis of a novolac‐based 3‐aminopropylsiloxane resin and its application for the removal of Cu2+, Cr3+, and Ni2+ from electroplating wastewater

Novolac resin was modified with 3‐aminopropyltrimthoxysilane to obtain phenol‐formaldehyde‐aminopropylsiloxane resin (PF‐APS). Fourier transformation infra‐red spectra, thermogravimetric analysis, elemental analysis, and pH‐metric titration were used to characterize PF‐APS. Its chemical formula was suggested to be C₁₄H_12.49N_0.1O₂Si_0.1. The resin shows high experimental metal ions uptake capacity within short time of equilibration. The metal capacity was determined by atomic absorption spectrometry to be 0.787 mEq Cu/g. Maximum separation efficiencies of Cu²⁺, Cr³⁺, and Ni²⁺ from aqueous solutions on PF‐APS were at pH 8.0 and time of stirring 60 min; 94.0%, 90.8%, 83.2%, respectively. No significant interference from the background ions Na⁺, Cl^?, and was observed on the separation process. The heavy metal ions were eluted using 0.01 mol L^?1 EDTA at 65°C releasing >94% of the separated metal ions. The method of separation was applied successfully to remove the heavy metal ions Cu²⁺, Cr³⁺, and Ni²⁺ from electroplating wastewater from Dekirnis, Dakahlia Governorate, Egypt. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40993.     

Effect of Zn and Pb as alloying elements on the electrochemical behavior of brass in NaCl solutions

The electrochemical behavior of brasses with various Zn content (5.5–38 mass%) and brass (Cu–38Zn) with different Pb contents (1–3.4 mass%) in 0.6 M NaCl was investigated. The effects of temperature, immersion time, and concentration of chloride ions on the behavior of the different alloys were studied. The pitting corrosion behavior of Cu–Zn alloys and leaded–brass alloys in 0.6 M NaCl solution was also investigated. Open-circuit potential measurements (OCP), polarization techniques and electrochemical impedance spectroscopy (EIS) were used. The results show that the increase in the Zn content increases the corrosion rate of the brass alloys in chloride solutions, while the increase of Pb content in Cu–38Zn–Pb decreases the corrosion rate of the alloy. Long immersion time of the alloys in the aqueous electrolyte improves their stability due to the formation of passive film on the alloy surface. The breakdown potential is shifted to more negative direction with increasing the Zn content, whereas it shifts towards positive values with increasing Pb content. Equivalent circuit model for the electrode/electrolyte interface under different conditions was proposed to illustrate the electrochemical processes taking place at the interface. The electrochemical behavior of the different alloys was discussed in view of the fitting results.     

Piperidines As Corrosion Inhibitors for Iron in Hydrochloric Acid

The objective of this work is to provide additional insight on the influence of substituents on heterocyclic piperidine as acid corrosion inhibitors for iron. This series include piperidine and six derivatives. The inhibiting properties of piperidine and these derivatives were investigated in 1 M HCl by potentiodynamic polarization (dc) and electrochemical impedance spectroscopy measurements, and inhibition was found to increases as 26dp < 35dp < 2mp < 3mp < pip < 4bp < 4mp. Polarization curves suggest that they can all be considered as mixed-type inhibitors. An attempt to correlate electronic properties of the compounds with their experimental efficiencies using molecular orbital calculation methods did not show any clear-cut relationship.     

Novel composite sandwich structure from green materials: Mechanical,physical, and biological evaluation

Flax and Jute fabrics were used as reinforcements with polyester resin to form composite skins while poplar particleboard was used as a core for making composite sandwich structures by applying vacuum assisted resin transfer molding (VARTM) technique. Mechanical, physical, and biological properties of these novel composite sandwich structures were evaluated. The results showed that the proposed engineered panels have superior mechanical properties that are suitable for different structural applications compared with conventional particleboards. When compared with the control panels, significant enhancement on Modulus of elasticity (MOE) and Modulus of rupture (MOR) were achieved. On the other hand, the results indicated that the proposed panel composites exhibit better dimensional stability compared with poplar particleboard control panels. In addition, the proposed composite sandwich structures proved resistant against the decay fungi after 12 weeks of fungal exposure. Obviously, the developed composite panels could be used in a wide variety of applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42253.