Real-Time Global Illumination for VR Applications

Real-time global illumination in VR systems enhances scene realism by incorporating soft shadows, reflections of objects in the scene, and color bleeding. The Virtual Light Field (VLF) method enables real-time global illumination rendering in VR. The VLF has been integrated with the Extreme VR system for real-time GPU-based rendering in a Cave Automatic Virtual Environment.     

Acetals as nucleating agents for polypropylene

Nucleating agents increase the impact strength, tensile strength, and tensile elasticity modulus of semicrystalline polymers. Nucleating agents also decrease product cycle times, resulting in a cost savings per product unit. We have synthesized and tested 15 compounds as nucleactors for polypropylene. Of these, trinapthylidene sorbitol, tri-(4-methyl-1-naphthylidene)sorbitol, tri-(4-methoxy-1-naphthylidene) sorbitol, and dibenzylidene xylitol are efficient nucleators of polypropylene. Trinaphthylidene sorbitol (tns) has two major diastereomers: The “S” diastereomer yields a faster crystallization rate for polypropylene than does the commercial nucleator dibenzylidene sorbitol (Millad 3905). Crystallization rates are 208 and 88, respectively (t min^?1 × 1000). The “R” diastereomer, however, is a poor nucleator and interferes with the nucleating activity of the “S” diastereomer. A 52/48 mixture of diastereomers does not nucleate polypropylene, even at twice the concentration. This is first time that the importance of stereochemistry has been demonstrated in the nucleating action. © 1994 John Wiley & Sons, Inc.     

The Network as a Storage Device: Dynamic Routing with Bounded Buffers

We study dynamic routing in store-and-forward packet networks where each network link has bounded buffer capacity for receiving incoming packets and is capable of transmitting a fixed number of packets per unit of time. At any moment in time, packets are injected at various network nodes with each packet specifying its destination node. The goal is to maximize the throughput, defined as the number of packets delivered to their destinations. In this paper, we make some progress on throughput maximization in various network topologies. Let n and m denote the number of nodes and links in the network, respectively. For line networks, we show that Nearest-to-Go (NTG), a natural distributed greedy algorithm, is -competitive, essentially matching a known lower bound on the performance of any greedy algorithm. We also show that if we allow the online routing algorithm to make centralized decisions, there is a randomized polylog(n)-competitive algorithm for line networks as well as for rooted tree networks, where each packet is destined for the root of the tree. For grid graphs, we show that NTG has a competitive ratio of while no greedy algorithm can achieve a ratio better than . Finally, for arbitrary network topologies, we show that NTG is -competitive, improving upon an earlier bound of O(mn). An extended abstract appeared in the Proceedings of the 8th Workshop on Approximation Algorithms for Combinatorial Optimization Problems, APPROX 2005, Berkeley, CA, USA, pp. 1–13, Lecture Notes in Computer Science, vol. 1741, Springer, Berlin. S. Angelov is supported in part by NSF Career Award CCR-0093117, NSF Award ITR 0205456 and NIGMS Award 1-P20-GM-6912-1. S. Khanna is supported in part by an NSF Career Award CCR-0093117, NSF Award CCF-0429836, and a US-Israel Binational Science Foundation Grant. K. Kunal is supported in part by an NSF Career Award CCR-0093117 and NSF Award CCF-0429836.     

Design data for solar heating of air Using a Heat Exchange and Storage System

An arrangement for heating with solar energy by means of a heat exchanger and storage coupled to the two water heaters has been described^*. In the present paper, the amount of the heat transferred from water to air in the shell-and-tube heat exchanger and the temperature of the outgoing air have been estimated by considering various parameters, viz. flow rate and temperature of incoming air, temperature of incoming and outgoing water, length and diameter of tubes, etc. Both natural and forced convection mode of heat transfer have been considered.

Under boundary conditions of free convection, heat transfer would be rapid and efficient with a possible reduction in the pipe length. The maximum permissible limit of pressure drop per foot of each tube for pipes of different diameters at different Reynolds numbers has been given.

As conditions of drying vary from material to material, the data presented will help in arriving at the final design of the shell-and-tube heat exchanger to be used in drying a particular material.     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.     

Analysis of LDPC with optimum combining

Low density parity check (LDPC) codes have shown exceptionally good performance for single antenna systems over a wide class of channels. LDPC when implemented with a single input multiple output system with maximum ratio combining is optimum from the standpoint of maximising signal-to-noise ratio at combiner output without the presence of interferer. Optimum combining outperforms maximal ratio combining (MRC) in the presence of interferer(s). In this article, the performance of the LDPC codes with multiple receiver antennas with optimum combining in the presence of single interferer is investigated. The simulation results showed that LDPC codes of irregular construction are able to give high coding and diversity gain with optimum combining. The proposed LDPC optimum combined (LDPC–OC) system in Rayleigh fading channel in the presence of a single interferer improves the signal to interferer plus noise ratio by 2.62 dB with four receiver antennas and by 1.98 dB when the number of receiver antennas is three.     

An efficient algorithm for mass detection and shape analysis of different masses present in digital mammograms

The present study introduces an efficient algorithm for automatic segmentation and detection of mass present in the mammograms. The problem of over and under-segmentation of low-contrast mammographic images has been solved by applying preprocessing on original mammograms. Subtraction operation performed between enhanced and enhanced inverted mammogram significantly highlights the suspicious mass region in mammograms. The segmentation accuracy of suspicious region has been improved by combining wavelet transform and fast fuzzy c-means clustering algorithm. The accuracy of mass segmentation has been quantified by means of Jaccard coefficients. Better sensitivity, specificity, accuracy, and area under the curve (AUC) are observed with support vector machine using radial basis kernel function. The proposed algorithm is validated on Mini-Mammographic Image Analysis Society (MIAS) and Digital Database for Screening Mammography (DDSM) datasets. Highest 91.76% sensitivity, 96.26% specificity, 95.46% accuracy, and 96.29% AUC on DDSM dataset and 94.63% sensitivity, 92.74% specificity, 92.02% accuracy, and 95.33% AUC on MIAS dataset are observed. Also, shape analysis of mass is performed by using moment invariant and Radon transform based features. The best results are obtained with Radon based features and achieved accuracies for round, oval, lobulated, and irregular shape of mass are 100%, 70%, 64%, and 96%, respectively.     

Experimental analysis and development of correlations for gas holdup in high pressure slurry co-current bubble columns

The effect of liquid and gas velocities, solid concentrations, and operating pressure has been studied experimentally in a 15 cm diameter air-water-glass beads bubble column. The superficial gas and liquid velocities varied from 1.0 to 40.00 cm/s and 0 to 16.04 cm/s, respectively, while the solid loading varied from 1 to 9%. The gas holdup in the column was reduced sharply as we switched from batch to co-current mode of operation. At low gas velocity, the effect of liquid velocity was insignificant; while at high gas velocity, increasing liquid velocity decreased the gas holdup. Drift flux approach was applied to quantify the combined effect of liquid and gas velocities over gas holdup. For co-current three phase flows, the gas holdup decreased with increase in solid loading for all pressures. But for batch operations, when solid loading was 5% or more, settling started leading to higher gas holdup. Increasing pressure from atmospheric conditions increased the gas holdup significantly, flattening asymptotically.     

New developments in the melt rheology of nylons. I: Effect of moisture and molecular weight

Peculiar observations on the melt rheology of ultra-dry nylon resins, nylon 6 in particular, are reported. One aspect of this study deals with a sharp increase in zero shear melt viscosity (e.g. 2 to 5 times) as the nylon 6 resin moisture is taken from 0.10 down to 0.00%; the effect being reversible. Changes of such magnitude are unexpected considering that there are no detectable variations of the chemical/compositional/molecular weight type in the starting resin, when subjected to the imposed drying conditions. Another aspect of this study deals with a deviation of nylons (6, 6,6, and 12) from the Bueche (1952) relationship, well accepted for polymers to date. Under moderate drying conditions (e.g. 50°C/17 h/110 millitorr), the molecular weight exponent is found to be 3.8, which is within the range of 3.4 to 3.8 reported for nylon 6. However, under more severe drying conditions (e.g. 110°C/17 h/110 millitorr), the molecular weight exponents for nylon 6, nylon 66, and nylon 12 are 4.8, 5.4, and 4.6, respectively. We are proposing that a sharp increase in melt viscosity of ultra-dry nylon 6 is partly due to an increase in the molecular weight of the melt (extrudate) which then, has a more pronounced impact on melt viscosity in view of the 4.8 exponent. Such unique results, in contrast to polyethylene (free radical polymer) and poly(ethylene terephthalate) (condensation polymer) are tentatively attributed to H-bonding in nylon melts. Yet another aspect of this study deals with the rheology of supercooled molten polymers that can offer advantages for analytical characterization.