Some characteristics of a cellular receptor for virulent infectious bursal disease virus by using flow cytometry

A flow cytometric virus binding assay that directly visualizes the binding of infectious bursal disease virus (IBDV) to its target cells was established. The chicken B lymphoblastoid cell line, LSCC-BK3, which is permissive for IBDV infection, bound high levels of the virus. Another B lymphoblastoid cell line, LSCC-1104-B1, bound low levels of the virus, although it was nonpermissive. No virus binding was detected in nonpermissive T lymphoblastoid cell lines. In the binding assay to heterogeneous cell populations of chicken lymphocytes, IBDV (a highly virulent OKYM strain) bound to 94% cells in the lymphocytes prepared from the bursa of Fabricius, 37% cells in those prepared from the spleen, 3% cells in those prepared from the thymus, and 21% cells in those prepared from the blood. Most of the cells, which bound the virus, were surface immunoglobulin M (SIgM)-positive, but a small number of them were SIgM-negative. Additionally, the binding of IBDV to the LSCC-BK3 cells was affected by treatment of the cells with proteases and N-glycosylation inhibitors. These findings may indicate that the IBDV host range is mainly controlled by the presence of a virus receptor composed of N-glycosylated protein associated with the subtle differentiation stage of B-lymphocytes represented mostly by SIgM-bearing cells.     

The simplified two-pipette technique is more efficient than the conventional three-pipette method for blastomere biopsy in human embryos

Kell and Kx are two quantitatively minor proteins from the human erythrocyte membrane which carry blood groups antigens and are thought to be a metalloprotease and a membrane transporter, respectively. In the red cell membrane, these proteins form a complex stabilized by disulfide bond(s). Phosphorylation status of these proteins was studied, in the presence or absence of effectors of several kinases, either on intact cells incubated with [32P]-orthophosphate or on ghosts incubated with [gamma-32P]ATP. Purification of Kell-Kx complex, by immunochromatography on an immobilized human monoclonal antibody of Kell blood group specificity allowed to establish that (i) neither protein is phosphorylated on tyrosine; (ii) the Kell protein is a putative substrate for Casein Kinase II (CKII) and Casein Kinase I (CKI) but not for protein kinase C (PKC), whereas Kx protein is phosphorylated by CKII and PKC but not by CKI; (iii) Protein Kinase A neither phosphorylates the Kell nor the Kx proteins.     

Insulin-like growth factor binding protein-1 at mouse neuromuscular synapses

The insulin-like growth factor (IGF) signaling system includes the growth factors and their cell surface receptors, along with circulating IGF binding proteins (IGFBPs) that may alter and modulate the action of these neurotrophic hormones. These IGFBPs, along with IGFs and receptors, have been detected in various tissues including the brain. In this study, using polyclonal antibody to human IGFBP-1 or bovine IGFBP-2, we found that mouse muscle extracts contain similar-sized proteins that cross-react with these antibodies on Western immunoblots. After establishing that these antibodies reacted with the homologous murine IGFBPs, we performed immunocytochemistry to demonstrate the localization of IGFBP-1 at the neuromuscular junction, a model nicotinic, cholinergic synapse, as well as within intramuscular nerves. IGFBP-2, a distinct macromolecule, is present on the surface of muscle fibers and is not present within synapses or nerves.     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

Superparamagnetic particle dynamics and mixing in a rotating capillary tube with a stationary magnetic field

The dynamics of superparamagnetic particles subject to competing magnetic and viscous drag forces have been examined with a uniform, stationary, external magnetic field. In this approach, competing drag and magnetic forces were created in a fluid suspension of superparamagnetic particles that was confined in a capillary tube; competing viscous drag and magnetic forces were established by rotating the tube. A critical Mason number was determined for conditions under which the rotation of the capillary prevents the formation of chains from individual particles. The statistics of chain length was investigated by image analysis while varying parameters such as the rotation speed and the viscosity of the liquid. The measurements showed that the rate of particle chain formation was decreased with increased viscosity and rotation speed; the particle dynamics could be quantified by the same dimensionless Mason number that has been demonstrated for rotating magnetic fields. The potential for enhancement of mixing in a bioassay was assessed using a fast chemical reaction that was diffusion-limited. Reducing the Mason number below the critical value, so that chains were formed in the fluid, gave rise to a modest improvement in the time to completion of the reaction.     

Temperature dependence of high strain-rate impact fracture behaviour in highly filled polymeric composite and plasticized thermoplastic propellants

The effect of temperature and strain-rate on the fracture behaviour during high strain-rate ( 10³ sec^–1) impact of two highly filled polymeric composite propellants (containing segmented polyurethanes based on hydroxy-term inated polybutadiene (HTPB) or glycidyl azide polymer (GAP) filled with ammonium perchlorate (AP) particles) and a plasticized thermoplastic (cast double base (CDB) nitrocellulose-nitroglycerine) propellant have been examined over a wide temperature range encompassing the ittle-ductile transition. In the elastic region of the loaddisplacement curve, the yield stress and fracture toughness is highest for GAP/AP and lowest for HTPB/AP. In the elastic and post-yield ductile regions CDB is more fracture-resistant than GAP/AP and HTPB/AP over the temperature range –20 to 50° C, but below –40° C, where both CDB and GAP/AP are brittle, GAP/AP is more fracture-resistant than CDB (as observed in the elastic region). Although all the propellants are known to develop small cracks in the elastic and post-yield ductile regions of the load-displacement curve, the overall fracture behaviour is largely governed by viscoelastic properties (because the cracks close up in compression). The good mechanical properties of CDB, above the brittle-ductile transition temperature, can be attributed to the presence of a large-transition loss peak. In the composites, the fracture behaviour is also influenced to a lesser extent by the degree of filler-binder interactions. Dynamic mechanical analysis indicates that GAP/AP has a slightly higher degree of filler-binder interactions than HTPB/AP. A temperature-strain rate reduction has been obtained for the yield stress and the composite curve can be expressed by the equation _y =K ₁ +K ₂ log (ea _T ) whereK ₁ andK ₂ are constants anda _T is a shift factor.K ₂ is a material constant which reflects the temperature and strain-rate sensitivity.     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.     

Enhanced extraction of isoflavones from Korean soybean by ultrasonic wave

The amounts of isoflavones extracted from Korean soybean by various ultrasonic waves were compared using 60% aqueous ethanol solution. The effect on extraction yield of variations in solvent composition, temperature, and extraction time was investigated. The experimental results confirmed that ultrasonic waves are a desirable method to extract isoflavones from Korean soybean. The highest yield of aglycone isoflavones was obtained by ultrasonic waves with a frequency of 20 KHz and an extraction time of 10 min, which produced yields of glycoside and aglycone isoflavones three-fold greater than those by dipping method.     

SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006