Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment

A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.     

Influence of regular aerobic exercise on psychological health: A randomized, controlled trial of healthy middle-aged adults.

Evaluated 120 healthy, sedentary, middle-aged adults randomly assigned to either a 6-mo home-based aerobic exercise training program or to an assessment-only control condition. Adherence across the 6-mo period by the exercise group was demonstrated by self-report and heart rate microprocessor methods to exceed 75%. A 14-item Likert rating scale was used to measure a variety of psychological variables. Significant between-groups differences favoring the exercise group were found on scale items closely associated with actual physical changes that occurred with exercise (satisfaction with shape/appearance, perceived fitness). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Efficacy and Safety Evaluation of Ozonation to Degrade Aflatoxin in Corn

ABSTRACT: This study determined the efficacy and safety of ozonation in degrading aflatoxin in corn. Ozonation (10 to 12 wt%) reduced aflatoxin levels by 92% and no reversion to the parent compound was observed. Ozonation had minimal effect on fatty acids of uncontaminated corn, but had significant effect on fatty acids of contaminated corn. Crude extracts showed no mutagenic potential in the Ames assay using TA98 and TA100. Clean-up using hexane increased their mutagenic potentials. Clean-up using Mycosep columns increased the mutagenic potentials 18 to 617%. Hexane extracts from ozone-treated contaminated corn had lower inhibitory effect. This suggested that a fat-soluble mutagen is being formed or natural inhibitors of mutagenicity are being destroyed.     

Compact conical antennas for wide-band coverage

A broadband antenna with a vertically polarized, omnidirectional electric field is studied. The design of the antenna and its feeding system in the wide frequency range from 20 to 1000 MHz is described and the driving-point impedance determined. Also calculated are the voltage standing-wave ratio (VSWR) and the input impedance of a transmission line connected to the antenna. More efficient operation at low frequencies is obtained by adding a length of transmission line to form a resonant section with the antenna. The effect of the different properties of the earth's surface on the field pattern is treated in a companion paper     

Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite

The effects of a thermal residual stress field on fatigue crack growth in a silicon carbide particle-reinforced aluminum alloy have been measured. Stress fields were introduced into plates of material by means of a quench from a solution heat-treatment temperature. Measurements using neutron diffraction have shown that this introduces an approximately parabolic stress field into the plates, varying from compressive at the surfaces to tensile in the center. Long fatigue cracks were grown in specimens cut from as-quenched plates and in specimens which were given a stress-relieving overaging heat treatment prior to testing. Crack closure levels for these cracks were determined as a function of the position of the crack tip in the residual stress field, and these are shown to differ between as-quenched and stress-relieved samples. By monitoring the compliance of the specimens during fatigue cycling, the degree to which the residual stresses close the crack has been evaluated. formerly Research Student, Department of Materials Science and Metallurgy, University of Cambridge formerly Lecturer, Department of Materials Science and Metallurgy, University of Cambridge This article is based on a presentation made in the symposium entitled “Creep and Fatigue in Metal Matrix Composites” at the 1994 TMS/ASM Spring meeting, held February 28–March 3, 1994, in San Francisco, California, under the auspices of the Joint TMS-SMD/ASM-MSD Composite Materials Committee.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.