“镍”催化酰氯和有机锡试剂交叉偶联反应的研究

镍络合物催化酰氯与有机锡试剂交叉偶联合成有机酮的反应,其反应选择性强,反应彻底,转化率高,工艺简单。在有机锡过量的情况下,对不同催化剂的催化活性和包括投料比,反应温度,反应时间,反应溶剂等反应条件进行了考察。     

Comments on “The electromagnetic field of a vertical electricdipole over the Earth or sea” [and reply]

Yokoyama makes some comments on the “numerical distance” contained in the surface wave term in the paper by King and Sandler (see ibid., vol.42, p.383, 1994) comparing it with the one obtained by former authors. He comments on the parameter P in the Fresnel-integral term in the paper. Yokoyama concludes that for the calculation of such a problem in a semi-sphere, the spherical polar coordinate system is preferable to the cylindrical coordinate system including the case of lateral waves. King and Sandler reply to the Comment     

The effects of plasma etching induced gate oxide degradation onMOSFET's 1/f noise

The effects of the plasma etching process induced gate oxide damages on device's low frequency noise behavior are investigated on MOSFET's fabricated with different field plate perimeter to gate area ratio antennas. Abnormal 1/f noise spectrum with a shoulder centered in the frequency range of 100 and to 1 kHz was frequently observed in small geometry devices, and it is attributable to a nonuniform distribution of oxide traps induced by plasma etching process     

能量"三环节"理论在原油蒸馏装置扩能改造中的应用

中国石化扬子石化股份有限公司炼油厂在第一套常减压蒸馏装置扩能改造中，使用了多项节能技术以实现能量的优化利用。本文以标定数据为基础，运用能量“三环节”理论对该装置的用能状况进行了计算和分析，从能量利用角度对装置的扩能改造效果进行了评价，并为装置的进一步优化能量利用提出了相应措施。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。     

Polyvinylidene fluoride monofilament sutures: can they be used safely for long-term anastomoses in the thoracic aorta?

Polyvinylidene fluoride (PVDF) represents an attractive alternative to polypropylene as a monofilament vascular suture because of its satisfactory physicochemical properties, it ease of handling, and its good biocompatibility. However, the polymer's ability to remain mechanically and chemically stable when exposed to a mild hydrolytic environment over the long term has yet to be demonstrated. One in vitro study involved the comparison of the long-term relative resistance of PVDF and polypropylene sutures to hydrolysis for a period of 9 years. The PVDF suture showed major molecular rearrangements from the original ratio of three crystalline structures to the single beta crystalline phase. The observation of some surface oxidation and water inhibition did not significantly modify the tensile strength of the PVDF suture, which retained 92.5% of its original value. In contrast, the polypropylene sample did not undergo any recrystallization but was associated with more oxidation byproducts and more water molecules near the surface, which contributed to a 46.6% loss in initial tensile strength. An in vivo study confirmed that PVDF sutures are biocompatible and are able to maintain satisfactory biostability when used to anastomose thoracic aortic allografts for a period of 6 months in the dog. The cellular reaction of fresh allografts as well as the control autografts to PVDF sutures was minimal. In other allografts that had been preserved in a supplemented medium for 1 week prior to implantation, the PVDF sutures healed satisfactorily with the formation of neocollagen and few macrophages surrounding the monofilament. No evidence of instability at the allograft-host artery junction was observed, confirming that the PVDF sutures were able to ensure a secure anastomosis in the thoracic aorta. PVDF sutures have demonstrated superior long-term biostability in vitro and minimal tissue response in vivo. These are two essential requirements when evaluating the use of a suture for vascular surgery in general and thoracic aortic surgery in particular.     

Numerical modeling of near corona wire electrohydrodynamic flow in a wire-plate electrostatic precipitator

Numerical modelling of the flow velocity fields for the near corona wire electrohydrodynamic (EHD) flow was conducted. Solutions of the steady, two-dimensional momentum equations have been computed for a wire-plate type electrostatic precipitator (ESP). The equations were solved in the conservative finite-difference form on a fine uniform rectilinear grid of sufficient resolution to accurately capture the momentum boundary layers. The numerical procedure for the differential equations was used by SIMPLEST algorithm. The CFD code coupled with Poisson's electric field, ion transport equations and the momentum equation with electric body force, was used for the numerical simulation with the Chen-Kim k-epsiv turbulent model. The numerical results show that EHD secondary flow was clearly visible in the downstream regions of the corona wire despite the low Reynolds number for the electrode (Re _cw=12.4). Secondary flow vortices caused by the EHD increases with increasing discharge current or EHD number, hence pressure drop of ESP increases