Humidity Sensor Characteristics of Woodceramics

The humidity sensor characteristics of Woodceramics were investigated. The Woodceramics used in this experiment were prepared at 650–900°C. The size of specimens selected was 1 × 1 × 10 mm . One was used as-cut and the other was polished. Above 700°C, the resistance of the specimen was below 50 and the decrease of resistance with increasing relative humidity was small. The specimen prepared at 650°C had a resistance of about 1 k. The resistance of as-cut specimens decreased with increase in relative humidity, but that of the polished specimen did not change significantly. The difference between as-cut and polished samples was explained by the differences in surface micro-structure.     

High oleic acid oil suppresses lung tumorigenesis in mice through the modulation of extracellular signal-regulated kinase cascade

This study was undertaken to estimate the effect of dietary high oleic acid oil (OA) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in mice. Diet containing 10% oil was fed to mice through experimental periods. On day 30 after NNK injection (100 mg/kg body weight, i.p.), the treatment increased the level of prostaglandin E₂ (PGE₂) as well as proliferating cell nuclear antigen, a marker of cell proliferation in a high linoleic acid oil (LA)-fed group but not in an OA-fed group. The NNK treatment also induced the activation of an extracellular signal-regulated kinase (Erk) cascade (Erk, Mek and Raf-1) in an LA-fed group. On the other hand, OA feeding abolished the NNK-induced activation of the Erk cascade. In conjugation with these events, OA feeding reduced lung tumor incidence and tumor multiplicity (percentage of mice with tumors) in mice compared with LA feeding at the 20th experimental week. These results suggest that OA suppresses lung tumorigenesis and that this suppression is correlated with the inhibition of PGE₂ production and inactivation of the Erk cascade.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Combustion Characteristics of High Burn Rate Azide Polymer Propellant

The combustion characteristics of high burn rate azide polymer composite propellant were examined by using a chimney type strand burner, a Ø 80 mm × 140 mm small rocket motor and a L/D = 16 of Ø 70 mm heavy-wall rocket motor. The propellant, BAMO/NMMO copolymer was used as a fuel binder and AP as an oxidizer, burned approximately 29 mm/s at a pressure range of 7 MPa to 20 MPa with a plateau-mesa burning behavior. However, the pressure exponent rapidly increased at above the pressure of 20 MPa and was 0.52 between 20 MPa and 25 MPa. The low pressure exponent and high burn rate of the azide polymer propellant are suitable to the short burn time at the maximum expected operating pressure range of 15 MPa to 20 MPa. The high L/D heavywall rocket motor with volumeric mass fraction of 83% showed stable combustion without any pressure oscillation and severe erosive burning. The average burn rate in the high L/D motor was 10% larger than that estimated from the strand data. The theoretically calculated pressure-vs-time and thrust-vs-time curves were well consistent with the measured data. α = 20 and β = 180 for the Lenoir-Robillard equation were used to estimate the burn rate.     

Detection of aluminium by energy dispersive X-ray microanalysis at high accelerating voltages with semi-thin sections of biological sample

Aluminium (Al) was detected in semi-thin sections of three organs, the duodenum, liver and kidney, of ddY strain mouse by energy dispersive X-ray microanalysis at high accelerating voltages around 300 kV. Firstly, to determine the conditions best for detecting Al, several adult ddY mice were injected intraperitoneally with aluminium chloride (AlCl3) and the duodenums were fixed, embedded and sectioned at various thicknesses and subjected to energy dispersive X-ray microanalysis at various accelerating voltages from 100 to 400 kV. From the results obtained, 1.0 microm-thick sections observed at 300 kV resulted in the highest peak-counts/background ratios and were shown to be the most suitable for X-ray microanalysis. Secondly, ddY mice aged four weeks were administered orally with 2% AlCl3 at pH 2.5 for two weeks and the three organs (duodenum, liver and kidney) were subjected to X-ray microanalysis under the same condition found above. The results were compared with light microscopic Al staining of the same tissues. Aluminium was detected in lysosomes of the three kinds of tissues with higher sensitivity by energy dispersive X-ray microanalysis by light microscopic observation. From the results, it was suggested that Al dissolved in acidic water was absorbed in the duodenum and accumulated in the liver and kidney.     

Enhancement of Defect Production Rates in <Emphasis Type="Italic">n</Emphasis>-Type Silicon by Hydrogen Implantation Near 270 K

Defect production behavior in hydrogen-implanted n-type silicon has been studied by varying the implantation temperature from 88 K to 303 K. Deep-level transient spectroscopy has been used to reveal electron trap spectra for Schottky diodes fabricated at room temperature after implantation. Metastable defects are observed in addition to vacancy- and hydrogen-related defects. It is found that the production rates of these defects are greatly enhanced by hydrogen implantation near 270 K. It is suggested that hydrogen plays an important role in enhancement of defect production rates, since such defect production behavior is not observed in He-implanted samples.     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.