A novel quarter‐wave retardation film for improving viewing angle properties in time‐sequential stereoscopic 3D‐LCDs

We have successfully developed a quarter‐wave retardation film (QWF) for wide viewing angle 3D liquid crystal displays (3D‐LCDs) that provides high luminance, low crosstalk, low color change, and low head‐tilt‐angle dependency. It was found that the out‐of‐plane retardation (Rth) of the QWF in the LCD needs to be close to 0 nm in order to improve the 3D display properties at an off‐axis position and that the in‐plane retardation (Re) needs to be adjusted from 120 to 130 nm to achieve low color change with head tilting. We adopted a coating process for making our QWF because of its potential for retardation control. 3D‐LCDs with this QWF whose Rth was nearly zero had high performance and allowed off‐axis other than on‐axis.     

An abnormally shortened fatigue life of steels caused by anelasticity

Some abnormal fatigue life shortenings dependent upon load frequency for several steels are discussed. A possible relation between anelasticity caused by interstitial atoms and the abnormal fatigue life drop is presented. Normally, interstitial atoms are in a position which minimizes the energy around a dislocation, the Snoek ordering sites. We consider the Snoek effect as a typical example of anelasticity, and the possibility on atoms moving from attractive sites to repulsive ones when repeated stresses are applied and discuss a theory to explain the reduction of the fatigue life using Snoek ordered atoms moving out by fatigue stress at the frequency of Snoek effect. Bending fatigue tests were conducted to obtain the relationship between fatigue life and load frequency at two different temperatures (298 K and 333 K) for an iron nitrided steel. A sharp fatigue life drop was observed at a load frequency corresponding to the resonant frequency of the Snoek effect for nitrogen atoms. The frequency was about 3 Hz and 298 K and shifted to a higher frequency — about 6 Hz — at 333 K. Results reveal that the possible explanation to those abnormal phenomena may be anelasticity.Work partially conducted at Laboratorio E and Departamento de Ciencias de Materiales, Universidad Simón Bolívar, Venezuela.     

Ion exchange of intercalation compounds from WOP2O7 and intercalation ofn-alkylamines

Ion exchange of Na _x WOP₂O₇ ·nH₂O (x 1.4) prepared from WOP₂O₇ was attempted, using alkaline and alkaline earth ions. The degree of exchange was observed to be >50% at 90° C except for Mg²⁺. The basal spacing of ion-exchanged materials for the hydrated phase were dependent on the number of water molecules in the interlayer spaces, while those for the dehydrated phase increased with the size of ions in the interlayer spaces. The network of water molecules linked by the hydrogen bond in the interlayer spaces seems to determine the basal spacing. By the ion-exchange reaction,n-alkylammonium ions were intercalated into the interlayer spaces of Na _x WOP₂O₇ ·nH₂O (x 1.4) and Sn _x H _y WOP₂O₇ ·nH₂O (2x +y 0.5). In spite of the difference in the charge density of the host layer, a similar arrangement of alkyl chains in the interlayer spaces resulted, and neutral amines were considered to be intercalated as well as ammonium ions. Direct reaction ofn-alkylamine with WOP₂O₇ produced an intercalation compound without reduction of tungsten. The arrangement of the amines in the interlayer spaces is similar to that supposed to the ion-exchanged derivatives when heated at 140° Cin vacuo.     

Electrical property and defect structure of lanthanum-doped polycrystalline barium titanate

Electrical conductivity of two types of lanthanum-doped barium titanote ceramics with different dopant levels was measured at temperatures between 900 and 1250° C andP _{O 2}from 10^–5 to 1 atm. The activation energies of the conduction for the two are interpreted in terms of the formation energy of ionized oxygen vacancies even in such a highP _{O 2}region. This fact is in contrast with a well -known controlled -valency model proposed for rare- earth -doped semi-conducting perovskites. In a lightly lanthanum-doped specimen, semiconduction achieved at elevated temperatures is retained on cooling the specimen to room temperature, whereas in a heavily doped specimen, the resultant high-temperature semiconduction changed to insulation on cooling. The former behaviour on cooling is successfully explained by a metastabilization of oxygen vacancies accompanied by electrons formed at elevated temperatures.     

Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

Production of antimicrobially active silk proteins by use of metal‐containing dyestuffs

The work presented here discusses a new technique for preparing silk fibers and films with persistent antimicrobial activity through use of metallic dyestuffs during the fiber dyeing process. The length of the silk fibers investigated contracted when the fibers were immersed in concentrated neutral salt solutions, such as calcium or potassium nitrate, at elevated temperature levels. The birefringence and molecular orientation of the silk fibroin molecules became less ordered by the action of the neutral salt solutions, resulting in increased dyestuff absorption. Subsequently, contracted silk fibers were dyed with metallic dyestuffs containing Cr or Cu for the purpose of obtaining silk fibers with antimicrobial activity. Silk fibers dyed with metallic dyestuffs showed significant antimicrobial activity against the plant pathogen Cornebacterium and the human pathogen Coli bacillus. Tensile strength of the silk fibers after the salt shrinking and dyeing processes did not show a significant change, whereas the elongation at break was increased slightly. The techniques described here for preparing significantly active antimicrobial silk fibers are effective and economic ways of providing new materials for industrial and biomedical applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1181–1188, 2002     

High-Strength and High-Fracture-Toughness Ceramics in the Al2O3/LaAl11O18 Systems

Control of microstructure in the Al₂O₃/LaAl₁₁O₁₈ system was performed. Elongated alumina grains were formed by doping with small addition of silica, and 20 vol% lanthana- luminate was formed in situ by the reaction of LaAlO₃- A1₂O₃ in an alumina matrix. Strengths of over 600 MPa and a high fracture toughness (6 MPa.m^1/2) were achieved in the material with both elongated A1₂O₃ grains and LaAl₁₁O₁₈ platelets. Generally antagonistic properties such as strength and fracture toughness have been made compatible in the same ceramic system.     

Highly Transparent Lu-α-SiAlON

Novel Lu-α-SiAlON ceramics were produced by hot pressing mixtures of Si₃N₄, Lu₂O₃, AlN, and Al₂O₃ at 1950°C for 2 h in a nitrogen atmosphere. The resultant SiAlON was fully dense and possessed a uniform, equiaxed microstructure with a grain size of ∼1 μm, which resulted in a high hardness of >19 GPa. In addition to high hardness, the sample showed very high optical transparency in the visible light region, with >70% transmission at higher wavelengths. This high transparency was attributed to the uniform, dense microstructure and lack of residual grain-boundary phase.