Pore Structure and Thermal Stability of Mesoporous Mullite Fibers Prepared by Crystallization and Selective Leaching of Al2O3-SiO2 Glass Fibers

Porous mullite fibers were prepared by crystallization and selective leaching of Al2O3-SiO2 glass fibers using buffered HF-NH4F(BHF) aqueous solutions. The optimum concentration of BHF solution for selective leaching of the fibers was 0.9 mass% HF and 17.0 mass% NH4F. By firing at 1000–1300°C, the glass fibers changed into composite texture of mullite and glassy phase. Since the pores in the fibers were formed by selective leaching of glassy phase among mullite grains, they were tunable by changing the firing conditions of fibers. Pore size of the samples changed from around 4 nm in the 1100°C fired sample to 16 and 40 nm in the 1200 and 1300°C fired samples, respectively. The highest specific surface area obtained was around 30 m2/g, when the fibers were heat treated at 1200°C for 24 h and leached for 20 h in 0.9 mass% HF-17.0 mass% NH4F solution. From the thermal stability tests of the porous mullite fibers, its specific surface area was found to be maintained up to 1200–1300°C.     

Photo atomic layer deposition of transparent conductive ZnO films

Low-resistivity ZnO films were grown by photo atomic layer deposition (photo-ALD) technique using diethylzinc (DEZ) and H₂O as reactant gases. Self-limiting growth was achieved for the temperature range from 105°C to 235°C. It was found that UV light irradiation was very effective to increase the electron concentration of the films and the electron concentration of 5 × 10²⁰ cm⁻³ was achieved even in undoped ZnO. Thus, the resistivity of the films grown with UV irradiation was one order of magnitude less than that grown without UV irradiation. The minimum resistivity of 6.9 × 10⁻⁴Ω cm was obtained by photo- ALD method without any intentional doping.     

An economic and energy analysis on bio-hydrogen fuel using a gasification process

Recently, in Japan, recycling technologies have been developed using waste biomass material. Waste biomass is traded in the waste materials market between users and a third-party, who receives a fee for processing them. This study is an environmental and economic analysis of a biomass energy system, which can produce hydrogen fuel for fuel cells (purity of 99.99%) as an example of an environmental business model. The experimental apparatus was made based on the moving-bed gasifier by the German company, DM2 Inc., and the hydrogen gas yield was measured. Finally, the economic viability of the future hydrogen business was estimated.The experimental results obtained gave the gas concentration of 57.5% in a Steam/Carbon ratio of 1.40 at 900 °C.Assuming the plant scale of 10 t/d, the production amount of hydrogen gas would be 21.3 kg/h. Based on the law concerning waste processing in Japan, a sizeable amount of waste biomass could be expected. Therefore, if the processing fee which is paid to the group (contractor) ranges between 5.0 and 10.0 $/t, and if the whole investment cost is 6 million dollars and the depreciation period is 15 years, the bio-hydrogen production cost using the experimental data would be 5.75–7.86 $/kg-H₂ without receiving related subsidies. In a one-third grant proportion, the cost would become 4.60–6.72 $/kg-H₂.     

Heat transfer and pressure loss characteristics of a heat exchanger for recovering latent heat (effects of straight fin length and fin pitch on the heat transfer and pressure loss characteristics)

In recent years, the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. A latent heat recovery type heat exchanger is one of the effective methods for improving thermal efficiency by recovering latent heat. This paper describes the heat transfer and pressure loss characteristics of a latent heat recovery type heat exchanger having straight fins (fin length: 65 mm or 100 mm, fin pitch: 2.5 mm or 4 mm). These were clarified by measuring the exchange heat quantity, the pressure loss of the heat exchanger, and the heat transfer coefficient between the outer fin surface and gas. The effects of fin length and fin pitch on heat transfer and pressure loss characteristics were clarified. Furthermore, equations for predicting the heat transfer coefficient and pressure loss which are necessary for heat exchanger design were proposed. ©2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(4): 230– 247, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20153 Copyright © 2004 Wiley Periodicals, Inc.     

LES analysis of flow and turbulent mixing in an unsteady jet

The flow and mixing process of unsteady jets are fundamentally analyzed by large eddy simulations. The effects of nozzle velocity and turbulence intensity on the turbulent eddy structure and mixing process between the nozzle fluid and ambient fluid were investigated. The results show that a toroidal‐shaped vortex, which emerges around the jet tip, primarily accelerates the entraining flow. Also, increasing the turbulence intensity in the nozzle encourages mixing in the jet without changing the jet‐contour. Furthermore, when the rise‐up time of the initial nozzle velocity is elongated, turbulent mixing is suppressed. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(5): 303–313, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20158     

Purification and characterization of a highly thermostable, oxygen-resistant, respiratory [NiFe]-hydrogenase from a marine, aerobic hydrogen-oxidizing bacterium Hydrogenovibrio marinus

The membrane-bound [NiFe]-hydrogenase from Hydrogenovibrio marinus (HmMBH) was purified homogeneously under anaerobic conditions. Its molecular weight was estimated as 110 kDa, consisting of a heterodimeric structure of 66 kDa and 37 kDa subunits. The purified enzyme exhibited high activity in a wide temperature range: 185 U/mg at 30 °C and 615 U/mg at 85 °C (the optimum temperature). The K_m and k_cat/K_m values for H₂ were, respectively, 12 μM and 8.58 × 10⁷ M⁻¹ s⁻¹. The optimum reaction pH was 7.8, but its stability was particularly high at pH 4.0-7.0. Results show that HmMBH was remarkably thermostable and oxygen-resistant: its half-life was 75 h at 80 °C under H₂, and more than 72 h at 4 °C under air. The air-oxidized HmMBH for 72 h showed only weak EPR signals of Ni-B, suggesting a structural feature in which the active center is not easily oxidized.     

Contribution of different bitter-sensitive taste cells to feeding inhibition in a caterpillar (Manduca sexta).

Many compounds that taste bitter to humans also inhibit feeding in insects. Caterpillars (e.g., Manduca sexta) detect these compounds with a few bitter-sensitive taste cells. This study examined the role of these taste cells in feeding inhibition. Behavioral studies demonstrated that 3 bitter compounds (caffeine, salicin, and aristolochic acid) all inhibited feeding rapidly in Manduca sena. Electrophysiological studies revealed that each pair of bitter-sensitive taste cell differs in responsiveness to the bitter compounds. Ablation studies indicated that (a) those pairs of bitter-sensitive taste cells that responded vigorously to a particular bitter compound were sufficient to inhibit feeding on diets containing the same compound, but that (b) no pair of bitter-sensitive taste cells was necessary for inhibiting feeding. Thus, the different pairs of bitter-sensitive taste cells appear to make partially redundant contributions to feeding inhibition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An investigation of the pH-activity relationships of Cex, a family 10 xylanase from Cellulomonas fimi: xylan inhibition and the influence of nitro-substituted aryl-beta-D-xylobiosides on xylanase activity

The kinetic parameters of Cex, a family 10 xylanase from Cellulomonas fimi, were determined at various pH levels using soluble birchwood xylan (BWX) as a natural polymeric substrate along with three other synthetic aryl-beta-D-xylobioside substrates. Using BWX, a high level of substrate inhibition was observed which increased with decreasing pH. In contrast, typical Michaelis-Menten-type profiles were obtained using the three aryl-beta-D-xylobiosides as substrates. The k(cat) values determined using o-nitrophenyl-beta-D-xylobioside did not change as the pH increased, whereas the k(cat) values obtained with BWX, phenyl-beta-D-xylobioside and p-nitrophenyl-beta-D-xylobioside decreased, suggesting that the presence of an ortho nitro group affects the activity displayed by Cex. These differences were not observed with XynB from Clostridium stercorarium F9, a member of the same family of xylanases as Cex. These results indicate that a careful evaluation is required when employing substituted aryl-beta-D-xylobiosides in the characterization of xylanases.     

ADAPTIVE CONTROL DESIGN FOR NONLINEARLY PARAMETERIZED SYSTEMS WITH A TRIANGULAR STRUCTURE

A novel adaptive backstepping design for a class of nonlinearly parameterized systems with a triangular structure is proposed. Under the Lipschitz condition with respect to unknown parameters of the system, an effective adaptive controller is designed without the requirement on the compactness of the unknown parametric set. Especially, the proposed adaptive control enables the advantage of “tuning function concept”, which results in only one estimation law for the unknown parameters. Our simulation with induction motor model particularly shows the viability of the obtained results.