Phase structural analyses of polyethylene coatings on high‐density papers. III. Determination of the crystallite thicknesses by T1 measurements

Two different extrusion‐coating qualities of polyethylene, namely LDPE and HDPE, were coated on high‐density papers. Differences were observed with respect to their response to storage and low temperature heat treatment. HDPE does not respond to storage at ambient temperature and heat treatment in the same way as LDPE. The LDPE‐coating exhibits an increase in the monoclinic crystalline fraction at the paper surface as a result of heat treatment. The nature of this response appears to be a result of adhesion to a paper surface, the properties of this surface, orientation of polymer chains, and chain mobility differences. The increase of the monoclinic fraction is shown to relate to an increase of the mean crystallite thickness and initiation of new crystallites at the paper surface. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 235–241, 2004     

Application of molecular identification tools for Lactobacillus, with a focus on discrimination between closely related species: A review

Lactobacillus is among the most important GRAS food lactic acid bacteria, with nearly 140 species at present, mostly of industrial importance. Being part of the natural flora of a range of food products like raw milk, fermented dairy products, fruits, vegetables, meat products they also serve as starters for a number of fermented food products either to enhance the quality or to add health benefits. These groups of economically important species are often alike in phenotypic and physiological characteristics, probably due to their co-evolution in the same ecological niches; hence they are difficult to be differentiated. This demands advanced methods for their proper identification and characterization. With the advancement of molecular biology, a range of DNA-based molecular techniques has replaced the largely cumbersome phenotypic methods. This review summarizes the various molecular techniques available for detection and identification within the genus Lactobacillus, with special emphasis on the four groups of closely resembling species: L. casei group, L. acidophilus group, L. delbrueckii subspecies, and L. plantarum group. This review also provides insights into current trends for alternative molecular markers other than 16S rRNA to resolve the ambiguity within phylogenetically close species in the genus Lactobacillus.     

Zutrittskontrolle mit Gesichtserkennung

Firmen&ProdukteDehn Austria

überspannungs-schutz in der Telekommunikation     

A new approach to inversion-based feedforward control design for nonlinear systems

The finite-time transition between stationary setpoints of nonlinear SISO systems is considered as a scenario for the presentation of a new design approach for inversion-based feedforward control. Design techniques which are based on a stable system inversion result in input trajectories with pre- and/or post-actuation intervals. The presented approach treats the considered transition task as a two-point boundary value problem (BVP) and yields causal feedforward trajectories, which are constant outside the transition interval. The main idea of this approach is to provide free parameters in the desired output trajectory to solve the BVP of the internal dynamics. Thereby, a standard MATLAB function can be used for the numerical solution of the BVP. Feedforward control design techniques are illustrated by simulation results for a simple example.     

Die Bestimmung von Schwefelanteilen im Stahl unter 10 μg/g

Analytische Möglichkeiten einer neuen Gerätegeneration. Weiterentwicklung des Verfahrens mit synthetischer Eichung bis zur Bestimmungsgrenze 2 μg/g.     

On convection in aluminum reduction cells

The convection pattern in the bath electrolyte and the cathode metal of 150 kamp prebaked anode aluminum reduction cells has been studied by means of radioactive tracers. The initial distribution of the tracers—²⁴Na for the bath and¹⁹⁸Au for the metal phase-indicates a fast circulating movement with vortices at the ends in both phases. Circulation rates up to 100 cm per sec were observed, and an average value seemed to be 10 cm per sec. The implications of the convection on the mechanism of the secondary reactions, the dissolution of alumina in the bath electrolyte and the distribution of carbon particles in the cell are discussed.     

Optimierung spektrometrischer Verfahren durch ein Datenverarbeitungssystem

Einsatz von Prozeßrechnern in Laboratorien. Aufbau eines Systems zur Produktionsüberwachung eines Sauerstoffaufblasstahlwerkes. Beschreibung des Rechners und der Programmgestaltung. Ablauf der emissionsspektrometrischen und röntgenfluoreszenzspektrometrischen Roheisen-, Stahl- und Schlackenanalysen. Erste Ergebnisse und Erfahrungen.     

Synthesis of branched 'nanotrees' by controlled seeding of multiple branching events

The formation of nanostructures with controlled size and morphology has been the focus of intensive research in recent years. Such nanostructures are important in the development of nanoscale devices and in the exploitation of the properties of nanomaterials. Here we show how tree-like nanostructures ('nanotrees') can be formed in a highly controlled way. The process involves the self-assembled growth of semiconductor nanowires via the vapour-liquid-solid growth mode. This bottom-up method uses initial seeding by catalytic nanoparticles to form the trunk, followed by the sequential seeding of branching structures. Each level of branching is controlled in terms of branch length, diameter and number, as well as chemical composition. We show, by high-resolution transmission electron microscopy, that the branching mechanism gives continuous crystalline (monolithic) structures throughout the extended and complex tree-like structures. The controlled seeding method that we report here has potential as a generic means of forming complex branching structures, and may also offer opportunities for applications, such as the mimicking of photosynthesis in nanotrees.     

Monte Carlo and discrete-ordinate simulations of irradiances in the coupled atmosphere-ocean system

We compare Monte Carlo (MC) and discrete-ordinate radiative-transfer (DISORT) simulations of irradiances in a one-dimensional coupled atmosphere-ocean (CAO) system consisting of horizontal plane-parallel layers. The two models have precisely the same physical basis, including coupling between the atmosphere and the ocean, and we use precisely the same atmospheric and oceanic input parameters for both codes. For a plane atmosphere-ocean interface we find agreement between irradiances obtained with the two codes to within 1%, both in the atmosphere and the ocean. Our tests cover case 1 water, scattering by density fluctuations both in the atmosphere and in the ocean, and scattering by particulate matter represented by a one-parameter Henyey-Greenstein (HG) scattering phase function. The CAO-MC code has an advantage over the CAO-DISORT code in that it can handle surface waves on the atmosphere-ocean interface, but the CAO-DISORT code is computationally much faster. Therefore we use CAO-MC simulations to study the influence of ocean surface waves and propose a way to correct the results of the CAO-DISORT code so as to obtain fast and accurate underwater irradiances in the presence of surface waves.