Modeling recrystallization kinetics,grain sizes,and textures during multipass hot rolling

A physically based model for the evolution of recrystallization microstructures and textures during hot rolling of aluminum is presented. The approach taken differs from similar models developed for steels. The present model is based on recent experimental investigations directed toward identifying the nature of the nucleation sites for recrystallized grains of different crystallographic orientations. Particle stimulated nucleation (PSN) and nucleation from cube bands and grain boundary regions have been incorporated in the model. The multipass aspect complicates the modeling due to partial recrystallization between the rolling passes. Two different approaches have been suggested to handle this. The model has been applied to predictions of recrystallization kinetics, recrystallized grain sizes, and recrystallization textures during multipass hot rolling of aluminum. The predictions are reasonable compared to experimental results.     

Umformungen an quergepreßten Drähten - Hochfester Stahldraht für Seile und Bündel in der Bautechnik

Die Auswirkungen des Querdrucks auf die Größe der Umformung nichtzug - und zugbeanspruchter Drähte werden theoretisch eingegrenzt, versuchsmäßig untermauert und graphisch dargestellt. Die Querpressung wird von Drähten gleicher Art ausgeübt. Die Einflüsse des Querdruckes aus der Verseilung auf das Tragverhalten eines vollverschlossenen Spiralseiles werden anhand eines Beispieles diskutiert.     

Au-Sn SLID Bonding: A Reliable HT Interconnect and Die Attach Technology

Au-Sn solid–liquid interdiffusion (SLID) bonding is an established reliable high temperature (HT) die attach and interconnect technology. This article presents the life cycle of an optimized HT Au-Sn SLID bond, from fabrication, via thermal treatment, to mechanical rupture. The layered structure of a strong and uniform virgin bond was identified by X-ray diffraction to be Au/ζ (Au_0.85Sn_0.15)/Au. During HT exposure, it was transformed to Au/β (Au_1.8Sn_0.2)/Au. After HT exposure, the die shear strength was reduced by 50 pct, from 14 Pa to 70 MPa, which is still remarkably high. Fractographic studies revealed a change in fracture mode; it was changed from a combination of adhesive Au/Ni and cohesive SiC fracture to a cohesive β-phase fracture. Design rules for high quality Au-Sn SLID bonds are given.     

Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718

High-pressure cooling has proven to be very effective when machining with carbide inserts. Longer tool life and improved chip breaking are among the most commonly mentioned advantages. Nevertheless, this cooling method has been reported to reduce the life of ceramic tools in machining of heat-resistant alloys. The main reason for that is said to be the accelerated notch wear. Therefore, in this study, SiAlON ceramic inserts with improved resistance to notching were tested in machining of Inconel?718 under high-pressure cooling. The results were compared to conventional cooling. It turned out that, while notch wear was still slightly increased when high-pressure cooling was applied, it was no longer critical for the tool life. Flank wear, on the other hand, was reduced, which led to significantly longer tool life. The variation of the tool life appeared to be slightly less and chip breaking was considerably improved. This shows that, when used properly, high-pressure cooling can help to increase the productivity in machining of heat-resistant alloys with ceramic tools.     

Chloridazon-Metaboliten im Grundwasser

Grundwasser - Chloridazon ist ein Herbizidwirkstoff, der in Deutschland seit 1964 für den Einsatz in der Landwirtschaft zugelassen ist. Er wird hauptsächlich beim Anbau von Rüben,...