Reinjection experiment at the matsukawa vapor-dominated geothermal field: Increase in steam production and secondary heat recovery from the reservoir

A reinjection experiment has been conducted in an attempt to sustain reservoir pressure and steam production and to extract remaining heat energy in the superheated reservoir in the Matsukawa vapor-dominated geothermal field. This experiment was undertaken because the increase in superheat of produced steam and the decline of steam production are the current major issues for stable operation of the power plant. Almost all the reinjected fluid into well MR 1 was recovered from well M5, and the steam production of well M5 has increased by approximately 67%.     

Transient behavior of subthreshold characteristics of fullydepleted SOI MOSFETs

It has been found that the subthreshold currents of fully depleted silicon-on-insulator (SOI) MOSFETs show a transient behavior under certain front-gate and back-gate voltage conditions. The cause of this anomaly is explained, and applications for the phenomenon are pointed out. Particularly, a simple way to measure the silicon film thickness is suggested     

Laboratory aid and ultrasonography in the diagnosis of appendicitis in children

The purpose of this study was to evaluate the relationship between the number of yolk sacs and amnionicity in monochorionic twin pregnancies scanned early in the first trimester. We retrospectively reviewed images of all monochorionic twins scanned between 6 and 9.5 weeks' gestation and with pathologic or sonographic confirmation of chorionicity-amnionicity. Each film was reviewed for the number of yolk sacs present, as well as for the gestational age at which the amniotic membrane was first visualized. Twenty monochorionic-diamniotic pregnancies and two monochorionic-monoamniotic pregnancies met the criteria for inclusion in the study. In diamniotic pregnancies scanned at less than 8 weeks' gestation, only the yolk sacs were identified; none of the dividing amniotic membranes were detected. Two yolk sacs were identified in all but one case. In this case, although one yolk sac was seen at 6 weeks, follow-up scanning at 8 weeks revealed two yolk sacs. In each of the monochorionic-monoamniotic twin pregnancies, one yolk sac was seen at 9 weeks and a single amnion encircled both embryos. We conclude that the sonographic identification of two yolk scas in monochorionic twins enables us to make the diagnosis of diamniotic twins early in the first trimester, before the amniotic membrane can be imaged. The presence of one yolk sac should prompt a follow-up ultrasonogram to assign amnionicity definitively.     

Suppression of boron penetration in p+ polysilicon gateP-MOSFETs using low-temperature gate-oxide N2O anneal

It has been reported that high-temperature (~1100°C) N₂ O-annealed oxide can block boron penetration from poly-Si gates to the silicon substrate. However, this high-temperature step may be inappropriate for the low thermal budgets required of deep-submicron ULSI MOSFETs. Low-temperature (900~950°C) N₂O-annealed gate oxide is also a good barrier to boron penetration. For the first time, the change in channel doping profile due to compensation of arsenic and boron ionized impurities was resolved using MOS C-V measurement techniques. It was found that the higher the nitrogen concentration incorporated at Si/SiO₂ interface, the more effective is the suppression of boron penetration. The experimental results also suggest that, for 60~110 Å gate oxides, a certain amount of nitrogen (~2.2%) incorporated near the Si/SiO₂ interface is essential to effectively prevent boron diffusing into the underlying silicon substrate     

Stereoscopic synthesized brain-surface imaging with MR angiography for localization of a peripheral mycotic aneurysm: case report

A patient with subacute bacterial endocarditis and a peripheral mycotic aneurysm is presented. We used a combined multi-slice surface anatomy scanning (SAS) and contrast-enhanced MR angiography image to determine the exact location of the small lesion by applying a skin marker on the scalp and visualizing the relationship of the marker to the brain surface structures and to the lesion. This technique was useful for the removal of a small peripheral aneurysm using only a limited craniotomy.     

K- and Q-bands CMOS frequency sources with X-band quadrature VCO

Fully integrated 10-, 20-, and 40-GHz frequency sources are presented, which are implemented with a 0.18-/spl mu/m CMOS process. A 10-GHz quadrature voltage-controlled oscillator (QVCO) is designed to have output with a low dc level, which can be effectively followed by a frequency multiplier. The proposed multipliers generate signals of 20 and 40 GHz using the harmonics of the QVCO. To have more harmonic power, a frequency doubler with pinchoff clipping is used without any buffers or dc-level shifters. The QVCO has a low phase noise of -118.67 dBc/Hz at a 1-MHz offset frequency with a 1.8-V power supply. The transistor size effect on phase noise is investigated. The frequency doubler has a low phase noise of -111.67 dBc/Hz at a 1-MHz offset frequency is measured, which is 7 dB higher than a phase noise of the QVCO. The doubler can be tuned between 19.8-22 GHz and the output is -6.83 dBm. A fourth-order frequency multiplier, which is used to obtain 40-GHz outputs, shows a phase noise of -102.0 dBc/Hz at 1-MHz offset frequency with the output power of -18.0 dBm. A large tuning range of 39.3-43.67 GHz (10%) is observed.     

Distributed Multirobot Exploration and Mapping

Efficient exploration of unknown environments is a fundamental problem in mobile robotics. We present an approach to distributed multirobot mapping and exploration. Our system enables teams of robots to efficiently explore environments from different, unknown locations. In order to ensure consistency when combining their data into shared maps, the robots actively seek to verify their relative locations. Using shared maps, they coordinate their exploration strategies to maximize the efficiency of exploration. This system was evaluated under extremely realistic real-world conditions. An outside evaluation team found the system to be highly efficient and robust. The maps generated by our approach are consistently more accurate than those generated by manually measuring the locations and extensions of rooms and objects.     

Self-Organization of Microlens Arrays Caused by the Spin-Coating-Assisted Hydrophobic Effect

A simple, low-cost, low-temperature, and shape-controllable approach has been demonstrated to fabricate polymer microlens arrays (MLAs). By using microcontact printing of the self-assembled monolayers and then spin coating, the microlenses were able to organize themselves on the patterned glass substrate. High-quality MLAs made of NOA65 prepolymer with lens-diameters of 50, 75, and 100 mum have been fabricated by this method. Lens shapes can be controlled by changing the spin rates of the prepolymer coating. Optical measurements have revealed an excellent light-collecting capability from the fabricated MLAs. It is anticipated that the technique will be ideally suited to low-cost and high-volume production     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008