Microstructure and properties of (Sr, Ca)CuO2/(Sr, Ca)RuO3 multilayers

Epitaxial multilayer thin films of infinite-layer (Sr, Ca)CuO₂ and perovskite (Sr, Ca)RuO₃ have been prepared on (100) SrTiO₃ substrates by multitarget rf magnetron sputtering. X-ray diffraction analyses revealed that the multilayer structure of (Sr, Ca)CuO₃/(Sr, Ca)RuO₃ was successfully fabricated with a minimum layer thickness of 20 Å. Transmission electron microscopy measurements of the multilayers indicated that there was no dislocation which normally exists in single-layer films with an infinite-layer structure. Resistivities of multilayer films at room temperature ranged from 1 to 10 m cm and showed semiconductor-like dependence against the temperature.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

A modified θ projection model for constant load creep curves-II. Application of creep life prediction

To minimize the deviation of the predicted creep curves obtained under constant load conditions by the original θ projection model, a new modified version that can be expressed by $\epsilon ={\theta }_1\left(1-e^{-{\theta }_{2}t}\right)+{\theta }_3\left(e^{{\theta }_4{e}^{{\theta }_5\epsilon }t}-1\right)$, was derived and experimentally validated in our last study. In the present study, the predictive capability of the modified θ projection model was investigated by comparing the simulated and experimentally determined creep curves of K465 and DZ125 superalloys over a range of temperatures and stresses. Furthermore, the linear relationship between creep temperature and initial stress was extended to the 5-parameter model. The results indicated that the modified model could be used as a creep life prediction method, as it described the creep curve shape and resulted in predictions that fall within a specified error interval. Meanwhile, this modified model provides a more accurate way of describing creep curves under constant load conditions. The limitations and future direction of the modified model were also discussed. In addition, this modified θ projection model shows great potential for the evaluation and assessment of the service safety of structural materials used in components governed by creep deformation.     

Effect of poly(acrylic acid) on the preparation of thick silica films by electrophoretic sol–gel deposition of re-dispersed silica particles

Thick silica films were prepared by the electrophoretic sol–gel deposition technique in the presence of poly(acrylic acid) (PAA) using monodispersed silica particles; the particles were prepared by the sol–gel method, pre-heat treated and then re-dispersed in the mixture of H2O and ethanol. The weight of deposited silica films was maximized when 0.2 mass % of PAA against the whole amount of sol was added. The particles constructing the thick silica films were packed densely when the amount of added PAA was less than 0.2 mass%. The weight of the film increased with decrease in the content of H2O in the sol when a fixed amount of PAA was added. After the heat treatment of deposited films at 800 °C, crack-free silica films of about 30 m thickness were prepared. © 1998 Chapman & Hall     

Development of a stable localized visual inspection system for underwater structures

To avert potential crisis from Japan’s aging infrastructure and declining birth rate, the Japanese Government is planning to introduce robotic technology for the inspection of social infrastructure (such as pipes, dams, and bridges). Recording underwater positions is a difficult task for human divers who undertake conventional dam inspections. This study presents the Anchor Diver 5.2 system for efficient and effectual dam inspection. Anchor Diver 5.2 is based on an extended-tether-maneuvered remotely operated vehicle (ROV) equipped with cameras. The ROV is lowered into water by a hoist system from a boat and implements a visual survey of the concrete underwater structure. To improve the visibility of the ROV in murky and cloudy water, a novel concept named Water Loupe is proposed. In addition, a simple boat-fixing method is proposed to provide a stable base on the water surface, and the underwater position of the ROV, which cannot be accessed by global positioning systems, is recorded using a feasible localization method. Finally, the developed system was evaluated in field experiments conducted in the Amagase Dam, Japan, and its merits and problems are discussed.     

Single‐layered retardation films with negative wavelength dispersion birefringence made from liquid‐crystalline monomers

Organic light‐emitting diode displays have a cathode composed of a layer of highly reflective metal. Reflection of external light from this layer can be suppressed with a broadband quarter‐wave plate. Although various types of quarter‐wave plate retardation films have been prepared by copolymerizing, mixing, or laminating multiple polymers, ideal wavelength dispersion has not been achieved with thin retardation films because of their relatively low birefringence and the complexity of the procedure required manufacturing them. In this study, we developed (i) new liquid‐crystalline monomers with negative wavelength dispersion birefringence that we used to obtain thin, single‐layered retardation films suitable for coating and (ii) retardation films with different molecular alignments. We found that the monomers showed high solubility and high regularity of molecular alignment, with less damage to the substrate and alignment films. We also investigated the wavelength dispersion and thermal stability of the films. We succeeded in developing retardation films that had a homeotropic alignment or a hybrid alignment with negative wavelength dispersion. These alignments can be used to obtain antireflection films with an improved viewing angle for organic light‐emitting diode displays or next‐generation thin displays.     

Gender differences in hand stability of normal young people assessed at low force levels

To examine gender differences in hand stability, finger position and force holding tasks at low force levels were conducted with 30 male and 30 female young adults. Total fluctuation was defined as the standard deviation of measured data and fluctuation and the 10-Hz component of the physiological tremor were compared between maleand female subjects. In all tasks, the total fluctuation and the 10-Hz tremor were significantly larger in male subjects than females. On average, the fluctuation was 1.3 times larger and the 10-Hz tremor was 1.6 times larger. The results of this study suggest that women have superior hand stability compared with men at low force levels. Finger length, maximal voluntary contraction and surface electromyography were also measured and factors related to gender differences in hand stability are discussed. STATEMENT OF RELEVANCE: Hand stability is crucial for precise manual operations. This study demonstrated gender differences in hand steadiness at low force levels. Though hand dexterity cannot be explained only by hand stability, the results of this study are useful not only for occupational aptitude tests but also for neuropsychological tests.     

New coprimeness over multivariable polynomial matrices and its application to control delay systems

This paper presents a new notion of coprimeness over multivariable polynomial matrices, where a single variable is given priority over the remaining variables. From a characterization through a set of common zeros of the minors, it is clarified that the presented coprimeness is equivalent to weakly zero coprimeness in the particular variable. An application of the presented coprimeness to control systems with non-commensurate delays and finite spectrum assignment is also presented. Because the presented coprimeness is stronger than minor coprimeness, non-commensurate delays are difficult to deal with in algebraic control theory. The “rational ratio condition” between delays, which can reduce non-commensurate delays to commensurate delays, proves to be both powerful and practical concept in algebraic control theory for delay systems.     

A knowledge assimilation method for logic databases

In this paper we consider a deductive question-answering system for relational databases as a logic database system, and propose a knowledge assimilation method suitable for such a system. The concept of knowledge assimilation for deductive logic is constructed in an implementable form based on the notion of amalgamating object language and metalanguage. This concept calls for checks to be conducted on four subconcepts, provability, contradiction, redundancy, independency, and their corresponding internal database updates. We have implemented this logic database knowledge assimilation program in PROLOG, a logic programming language, and have found PROLOG suitable for knowledge assimilation implementation.