An assessment of spent nuclear fuel storage demands under uncertainty

This paper attempts to draw quantitative prospects of spent nuclear fuel (SNF) management in Japan, with emphasis on uncertainty of storage needs for SNF up to the year 2050. In a medium term up to the years 2020–2030, the storage need for SNF can be projected with relatively high accuracy as it steadily increases up to the level of 5000 tonnes of uranium (tU), which requires timely deployment of storage facilities accordingly. In a longer term up to 2050, a number of aspects may give influences on the SNF management strategy, which are analyzed in different sets of scenario assumptions. The results of quantitative simulation runs showed that the storage need for SNF will increase up to the level of 10,000 tonnes of heavy metals (tHM) in the Base Case, while it would further grow to 20,000–25,000 tHM in the Risk Management Cases. Careful attentions should be given to the point that not just quantity but characteristics of SNF to be stored will differ significantly among the simulation cases, such as from lower to higher burnup, uranium and MOX (mixed oxide) fuels. The results imply Japan's SNF management may require elaborate strategies, which consists of effective and timely measures into the future.     

Several Geotechnical Design and Construction Issues with Akashi Strait Bridge

The Akashi Kaikyo (Strait) Bridge, one of the major bridges of the Honshu-Shikoku bridge network connecting the main island and the Shikoku island, is the world's longest suspension bridge with a center span of about 2,000 m. The bridge was constructed over the Akashi Strait and opened to traffic in 1998 after a construction period of about 10 years. The granite stratum in the Akashi Strait was very deep, while the granite stratum provides the foundations for the other long span bridges which have been constructed in Japan. Three of the four foundations had to be constructed on either a weakly cemented gravelly soil deposit or a sedimentary soft rock layer. The geological structure was carefully investigated and the geotechnical properties, in particular the strength and deformation characteristics of these geomaterial types, were carefully evaluated. To this end, a comprehensive series of advanced triaxial compression (TC) tests were performed on rotary core tube samples of sedimentary soft rock after it was found that the due design was not possible based on unconfined compression tests. Both CD and CU TC tests and cyclic undrained triaxial tests were performed on rotary core tube samples (30 cm in dia.) of the gravelly soil. Based on the data, the long-term and seismic stabilities of the foundations were evaluated. The importance of strain- and pressure-dependent nonlinear stress-strain behaviour at small strains, as well as accurate strain measurements in the laboratory stress-strain tests, was confirmed by analyzing the full-scale behaviour of the foundation during and after construction and comparing the back-calculated stiffness values with those obtained from laboratory stress-strain tests, pressure-meter tests, plate loading tests and field shear wave velocity measurements.     

Oxide ionic conductivities of apatite-type lanthanum silicates and germanates and their possibilities as an electrolyte of lower temperature operating SOFC

Electrical properties of La_xM₆O_12+1.5x (M = Si, Ge) as an electrolyte for solid oxide fuel cell (SOFC) have been investigated. In La_xSi₆O_12+1.5x and La_xGe₆O_12+1.5x of x = 8–11, the highest conductivities were achieved at x = 9.7 (La_9.7Si₆O_26.55) and x = 9.0 (La_9.0(GeO₄)₆O_1.5), respectively. The conductivity of La_9.0(GeO₄)₆O_1.5 was higher than that of La_9.7Si₆O_26.55 in a temperature region higher than 700 °C, and the conductivity (2.4 × 10⁻³ S cm⁻¹) of La_9.7Si₆O_26.55 at 400 °C was higher than that (8.3 × 10⁻⁵ S cm⁻¹) of La_9.0(GeO₄)₆O_1.5. The power densities of SOFC (H₂ | Pt | electrolyte (thickness: 1 mm) | Pt | O₂) using La_9.0(GeO₄)₆O_1.5 as an electrolyte were 14.3 mW cm⁻² (700 °C) and 24.0 mW cm⁻² (800 °C). The corresponding SOFC using La_9.7Si₆O_26.55 was found to work even at lower temperatures of 400 and 500 °C with power densities of 0.011 and 0.12 mW cm⁻². The SOFC (H₂ | Ni–Sm_0.2Ce_0.8O_1.9 | electrolyte | Ba_0.5Sr_0.5Co_0.8Fe_0.2O_2.5 | air) using 0.3 mm thickness La_9.7Si₆O_26.55 electrolyte gave the 3.4 mW cm⁻² power density at 500 °C.     

Anisotropic corrosion of iron in pH 1 sulphuric acid

Anisotropic corrosion behaviour of a single grain of pure iron in 0.05 mol dm⁻³ sulphuric acid (pH 1) was investigated by a simple polarization technique. Both corrosion potential and corrosion current were found to be dependent on crystallographic orientation of the iron grain. A high corrosion current flowed on a grain showing a relatively noble corrosion potential, although both cathodic and anodic Tafel slopes were independent of the orientation. It was shown that cathodic hydrogen evolution reaction (HER) governed the corrosion reaction on the iron grain. Covalent bonding of Fe and H and coverage of H on Fe seem to play important roles in the HER and anisotropic corrosion behaviour of pure iron.     

Depassivation-repassivation behavior of a pure iron surface investigated by micro-indentation

Depassivation-repassivation behavior on a pure iron surface in borate buffer solution was examined under potentiostatic control by a micro-indentation test. Current peaks emerge during both downward and upward drives of the indenter due to depassivation which is caused by plastic deformation of the substrate but not elastic deformation and repassivation. The total electric charge of the current peaks is proportional to the maximum load. The total electric charge also increases with increase in intermission time of the indentation, indicating that the passive film is ruptured even during stress relaxation. It is estimated from the electric charge balance that 82% and 18% of the film rupture occurs during the downward drive and intermission, respectively, and that no rupture occurs during the upward drive. Furthermore, the film-ruptured area is estimated to be 80% of the plastic deformed surface area. The partial retainment of the passive film on iron suggests that the ductility of the passive film is higher than that of the substrate.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Conjugated fatty acids in food and their health benefits

Conjugated fatty acids (CFAs) are a mixture of positional and geometric isomers of polyunsaturated fatty acids with conjugated double bonds. Reports indicate that CFAs have potent beneficial effects, including antitumor, antiobese, antiatherogenic and antidiabetic activities. The molecules have also been shown to prevent the onset of hypertension. Recent reports suggest that each CFA isomer has different functions, for example the 10trans,12cis isomer of conjugated linoleic acid (CLA) has anticarcinogenic, antiobese and antidiabetic effects, whereas the 9cis,11trans-CLA isomer exerts an anticancer effect. Although it would be interesting to know the effects of CFAs on humans, there are only few reports concerning the anticancer and antiobese effects of CLA in humans. More detailed evaluations of the physiological bioactivities of CFA isomers on lifestyle-related diseases in humans and animals will be of great interest in future studies.     

A genetic algorithm with local search using activity list characteristics for solving resource‐constrained project scheduling problem with multiple modes

In this paper, we aim to solve the problem of resource‐constrained project scheduling with multiple modes (rc‐PSP/mM), in which multiple execution modes are available for each of the project's activity and with minimization of makespan as objective. We present a new genetic algorithm approach in order to solve this problem. In this procedure, we propose a new mutation operator that exploits a critical path and two new local search procedures, i.e. critical path improvement local search (cpiLS) and iterative forward/backward local search (ifbLS), using activity list characteristics. The cpiLS reduces the critical path and the ifbLS improves resource allocation of the schedule of rc‐PSP/mM. Also, to evaluate the proposed approach, we compare the results of the computational experiment on certain standard project instances with the several competing heuristic procedures presented in the literature, and it has been revealed that our procedure is one of the most competitive among the algorithms. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Effect of pressure and temperature on the molecular interaction of polar lubricant containing oleic acid in polypropylene glycol observed by infrared spectroscopy

In this work, we have investigated the infrared spectra of polar lubricant in order to explore the molecular interaction under high pressure and temperature conditions using diamond anvil cell. Polypropylene glycol and oleic acid were used as base oil and additive, respectively. Stretching vibration mode of polar functional groups, such as ν _O–H and ν _C═O, was found to be sensitive to pressure and temperature. The peak positions of the vibration mode were shifted clearly to lower wavenumber as pressure increases, and temperature increase induced a slight shift to higher wavenumber. These results indicate that hydrogen bonding between lubricant molecules of base oil and additive was influenced by pressure and temperature. And furthermore, the dependency of the peak shift was discontinuous and affected mainly by pressure. These results imply a structural change on the basis of the molecular interaction of the lubricating molecules at elastohydrodynamic lubrication contacts. Copyright © 2013 John Wiley & Sons, Ltd.