Performance of combined cobalt—nickel—zirconia and HZSM-5 catalyst systems for carbon monoxide hydrogenation

The synthesis of hydrocarbons via hydrogenation of carbon monoxide was investigated over cobalt—nickel—zirconia catalysts of various compositions in combination with zeolite HZSM-5 in “mixed bed” and “follow bed” arrangements. These combinations resulted in the formation of aromatics in amounts as high as 30-35 wt% under relatively mild operating conditions (1 atm, 250–280°C). Although the olefinicity of C₂ and C₃ fractions in the product stream was higher in the mixed bed compared to the follow bed arrangement, the selectivities to aromatics were comparable in the two bed arrangements. The aromatic selectivity was found to be sensitive to operating conditions. The formation of aromatics was favored at high HZSM-5/metal catalyst ratios, low space velocities and high reaction temperatures. The product distributions obtained using various metal/zeolite bifunctional catalysts have been discussed.     

Reliability Analysis of Single-Degree-of-Freedom Elastoplastic Systems. II: Suboptimal Excitations

A method for constructing an approximation of the critical excitation that drives an elastoplastic system from rest to a target threshold at a specified time instant, referred to as the “suboptimal excitation,” is presented in this paper. It is based on the observations gained from study of the critical excitations in the companion paper. Essentially, for the usual case of interest where the failure time is not small compared to the natural period, the duration of the positive and negative pulses of the critical excitation are roughly equal to half of the natural period. This consideration allows for a simple intuitive approximation of the critical excitation. The amplitudes of the positive and negative pulses are obtained in closed forms using energy balance. Numerical investigations show that the critical excitations are well approximated by the suboptimal excitations.     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

Predation of livestock ticks by chickens as a tick-control method in a resource-poor urban environment

The increasing prevalence of streptococci as causes of potentially fatal nosocomial bacteremia requires that antimicrobial agents used for empiric therapy in hospitalized patients include both pneumococci and viridans group streptococci as well as beta-hemolytic streptococci in their activity profile. In this study, the in vitro activity of cefepime, a new fourth-generation cephalosporin, was compared with other cephalosporins versus 197 nosocomial blood stream isolates of streptococci (20 Streptococcus pneumoniae, 104 viridans group, and 73 beta-hemolytic) isolated from patients at more than 30 medial centers from 1995 to 1997. Additional agents tested included penicillin, erythromycin, and vancomycin. Overall, cefepime inhibited 83% of the isolates at concentrations < or = 0.5 microgram/mL and 100% at < or = 8 micrograms/mL. By comparison, ceftazidime inhibited 35 and 88% of isolates at the same concentrations. Cefepime was approximately eightfold more potent than ceftazidime against S. pneumoniae, viridans group streptococci, and beta-hemolytic streptococci. Among the 42 isolates with penicillin MICs > 0.12 microgram/mL, 100% were inhibited by cefepime and only 48% by ceftazidime at < or = 8 micrograms/mL. The rank order of activity for all six agents against the 197 isolates was vancomycin > ceftriaxone > cefepime > penicillin > erythromycin > ceftazidime. Based on the results of the present study, cefepime and ceftriaxone were the superior cephalosporins in potency and spectrum for empiric coverage of patients at risk for streptococcal blood stream infections.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

A Stronger Complexity Result for the Single Machine Multi-Operation Jobs Scheduling Problem to Minimize the Number of Tardy Jobs

We consider the single machine multi-operation jobs scheduling problem to minimize the number of tardy jobs. Each job consists of several operations that belong to different families. In a schedule, each family of job operations may be processed in batches with each batch incurring a setup time. A job completes when all of its operations have been processed. The objective is to minimize the number of tardy jobs. In the literature, this problem has been proved to be strongly NP-hard for arbitrary due-dates. We show in this paper that the problem remains strongly NP-hard even when the due-dates are common and all jobs have the same processing time.     

Physicochemical Properties of Bread Baked from Flour Blended with Immature Wheat Meal Rich in Fructooligosaccharides

ABSTRACT: Grain of the soft white wheat cultivar Harus was harvested weekly from anthesis to maturity and fructooligosaccharides (FOS) contents were determined by reversed-phase high-performance liquid chromatography. Tests were carried out to determine the effect of adding immature wheat meal to a base flour of cultivar Russ (hard red spring) on the quality characteristics of bread. FOS content was also analyzed in baked bread, and the effect of transglutaminase in improving bread quality was examined. Marked decreases in FOS contents, such as 1-kestose and nystose, were observed with grain maturation. The overall quality of bread appeared to be acceptable, and the added FOS were retained after baking.