Strange chaotic attractor crowding in boost converter model

A set of chaotic attractors is observed on a boost converter model. The union of their Poincare maps is strange. The attractors are densely packed such that they are sensitive to initial conditions. However every attractor in the set is stable with a finite (may be long) period     

Reliability assessment for solders with a stress buffer layer using ball shear strength test and board-level finite element analysis

The stress buffer layer (SBL) is a widely applied improvement in many advanced packages used to release the stress concentration at solder joints. However, it has been generally found that the metal line adjacent to the SBL may suffer larger deformation and its reliability should be addressed. In this study, the panel level package (PLP) technology with solder on polymer (SOP) structure is selected as the testing sample to investigate the effect of SBL. The ball shear strength test is conducted first to investigate the reliability of metal trace in PLP. In addition, finite element (FE) analysis is applied to understand the actual thermo-mechanical behavior of PLP after its assembly. The package-level and board-level reliability assessments are compared, and the suggested layout of the redistribution layer on the SBL is provided herein.     

Gel-entrapment of perfluorocarbons: a fluorine-19 NMR spectroscopic method for monitoring oxygen concentration in cell perfusion systems

Oxygenation is a major determinant of the physiological state of cultured cells. 19F NMR can be used to determine the oxygen concentration available to cells immobilized in a gel matrix by measuring the relaxation rate (1/T1) of perfluorocarbons (PFC) incorporated into the gel matrix. In calcium alginate gel beads without cells the relaxation rate (1/T1) of the trifluoromethyl group of perfluorotripropylamine (FTPA) varies linearly with oxygen concentration, with a slope of 1.26 +/- 0.15 x 10(-3) s-1 microM-1 and an intercept of 0.50 +/- 0.04 s-1. During perfusion with medium equilibrated with 95%/5% O2/CO2, changes in PFC T1s indicate that the average oxygen concentration was reduced from 894 +/- 102 microM in the absence of cells to 476 +/- 65 microM and 475 +/- 50 microM in the presence of 0.7 x 10(8) EMT6/Ro and RIF-1 murine tumor cells per milliliter of gel, respectively. The presence of 0.2 microliters of FTPA/ml of gel had no effect on the energy status of the cells as indicated by 31P NMR spectra. To calculate oxygen gradients within the beads from the average PFC T1 of the sample, a mathematical model was used assuming that oxygen is the limiting nutrient for cell metabolism and that the cellular oxygen consumption rate is independent of oxygen concentration. Data for EMT6/Ro cells were fit using experimentally determined perfusion parameters together with literature values for cell volume and oxygen consumption rate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Numerical simulation model of vibration responses of rectangular plates embedded with piezoelectric actuators

A numerical simulation model for random large amplitude vibration control of composite plate using piezoelectric material is presented. The H_∞ control design is employed to suppress the large amplitude vibrations of composites plates under random loading. The numerical simulation model is developed and based on the finite element method. The finite element governing equation includes fully coupled structural and electrical nodal degrees of freedom, and consider the von Karman large amplitude vibration. The modal reduction method using the structural modes is adopted to reduce the finite element equations into a set of modal equations with fewer degrees of freedom. The modal equations are then employed for controller design and time domain simulation. In the simulations without control, the value of the linear mode to the nonlinear deflection is quantified; and the minimum number of linear modes needed for accurate model is obtained. In the simulations with control, it is shown that the truncated modes, which are neglected in the control design, deteriorate the controller performance. Generally, the vibration reduction level is not monotonically increasing with the size of the piezoelectric actuator. The optimal piezoelectric actuator size depends on the excitation level. For higher excitation level, optimal actuator size is larger. The H_∞ controller based on the linear finite element formulation gives better vibration reduction for small amplitude vibration, but it still gives reasonable performance for large amplitude vibration provided that the piezoelectric actuator is big and powerful enough.     

Study on the propagation of inlet flow distortion in axial compressor using an integral method

 An integral method is investigated and developed in the current work. The effects of the parameters of inlet distortions on the trend of downstream flow feature in compressor are simulated. Other than the drag-to-lift ratio of the blade and the inlet incidence angle, it is found that the distorted inlet velocity is another essential parameter to control the distortion in propagation. Based on this study, a novel critical distortion line and corresponding critical distortion factor are proposed to express the effect of the two essential inlet parameters on the propagation of distortion, namely, the inlet incidence angle and the distorted inlet velocity. From the viewpoint of compressor efficiency, the propagation of inlet flow distortion is further described by a compressor critical performance and its critical characteristic. The results present a useful physical insight to an axial flow compressor behavior and asymptotic behavior of the propagation of inlet distortion, and confirm the active role of compressor in determining the velocity distribution when compressor responds to an inlet flow distortion. Received: 20 December 2001 / Accepted: 21 August 2002 The authors would like to thank HQ RSAF for permission to publish this work, their financial support and encouragement. The first author wants to acknowledge Prof. Frank Marble of California Institute of Technology, for bringing the problem to the author's attention and for his helpful discussion.     

Characterization and comparison of PECVD silicon nitride and silicon oxynitride dielectric for MIM capacitors

In this letter, we report on the electrical characteristic and the comparison of the metal-insulator-metal (MIM) capacitors with PECVD silicon nitride (SiN) and silicon oxynitride (SiON). Both capacitors are found to exhibit low leakage and high breakdown field strength, as well as absence of dispersive behavior, good linearity, and comparable quality factor behaviors.     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

Field dependence of impact ionization coefficients in In/sub 0.53/Ga/sub 0.47/As

Electron and hole ionization coefficients in In/sub 0.53/Ga/sub 0.47/As are deduced from mixed carrier avalanche photomultiplication measurements on a series of p-i-n diode layers, eliminating other effects that can lead to an increase in photocurrent with reverse bias. Low field ionization is observed for electrons but not for holes, resulting in a larger ratio of ionization coefficients, even at moderately high electric fields than previously reported. The measured ionization coefficients are marginally lower than those of GaAs for fields above 250 kVcm/sup -1/, supporting reports of slightly higher avalanche breakdown voltages in In/sub 0.53/Ga/sub 0.47/As than in GaAs p-i-n diodes.